Estimate the cost of a room addition or home extension from the added floor area and the finish level, with an optional amount for foundation and utility hookups.
Home Addition Cost Calculator
Cost to add a room or extend your home's footprint, from added square footage and finish level — covers room additions and home extensions.
Starting values: an addition of 300 ft² at the standard finish level, with no extras. The calculator gives 75,000.
How the calculator works
Total = added area × cost per ft² + extras
The cost per square foot is set by the finish level:
- Basic, with shell and drywall: 175 per ft²
- Standard: 250 per ft²
- High-end: 375 per ft²
The extras input is for the foundation and utility hookups, and is 0 by default. These are example rates, so replace them with local quotes. The area has a unit selector, so you can enter square metres.
Worked examples
The same addition at three levels
For 300 ft²:
- Basic: 300 × 175 = 52,500.
- Standard: 300 × 250 = 75,000.
- High-end: 300 × 375 = 112,500.
A 12 ft by 12 ft room
The area is 144 ft². At the standard level, 144 × 250 = 36,000. With 15,000 entered for the foundation and hookups, the total is 51,000.
A larger addition with extras
An addition of 400 ft² at the standard level, with 20,000 for the foundation and utilities: 400 × 250 = 100,000, and the total is 120,000.
What drives the cost of an addition
A guide to addition costs names these drivers:
- Type of addition. A bump-out extends a room by a few feet, but its fixed costs do not shrink with the size, so it can be costly per square foot. A second-story addition adds structural work, roof removal, a new stair and protection for the floor below.
- Foundation and site. Excavation, grading, drainage, soil and access to the lot all affect the base price, and difficult ground can need a more expensive foundation.
- Plumbing and wet rooms. Kitchens and bathrooms need supply and drain lines, venting and waterproofing, so they cost more than a bedroom or family room. Placing them near existing plumbing lowers the cost.
- Heating, cooling and electrical. A new room may need its own zone, and an existing furnace, air conditioner or panel may not have the capacity for the extra space.
- Roof and structure. Tying a new roof to an old one, matching the pitch and adding engineering all add labour.
- Permits and soft costs. Permit fees, inspections, design, surveys and engineering often sit outside the contractor price, and zoning can limit the size.
- Finishes and matching. Matching older siding, brick, windows and floors can add a lot.
Using the estimate
The calculator uses one rate for the whole addition, and it does not know whether the room is a bedroom or a bathroom, or whether it is a ground-floor or a second-story addition. For a wet room, or a second story, use a higher rate from a quote, or add the extra cost to the extras input. The foundation and the utility hookups are the most common items to put there.
Allow for the unexpected
The guide notes that older homes often show hidden problems once the walls are opened, so a reserve is usually needed. Keep a contingency outside the estimate, and add the permit and design fees if your quote does not include them.
Related calculators
For the other ways to change a home, see the home remodeling cost calculator, the room conversion cost calculator, the kitchen remodel cost calculator and the bathroom addition cost calculator. For the foundation, see the foundation cost calculator.
Planning the budget
Start with the size of the addition and the finish level, and run the calculator for each level to see the range. Then think about the type of room. A bedroom or family room is a dry space and costs less to build than a kitchen or a bathroom, which have plumbing. If the new room is a wet room, choose a higher rate, or add the extra cost to the extras input.
Check what your quotes include
Ask each contractor to list what is in the price. The guide says permit fees, design, surveys and engineering often sit outside the contractor construction price, so add them to your budget if they are not included. Ask whether the price covers matching the siding, the roof and the floors, since matching an older home can cost a lot.
Choose between an addition and other options
An addition is one way to gain space. Converting an existing space, such as a garage or a basement, can be another, and the room conversion calculator gives an estimate for that. If you are thinking about changing the existing rooms as well, add the cost from the remodeling calculator, and compare the total with the cost of the addition alone.
Checking the rate against your project
Compare the rate of the finish level with the plan for your addition. If you plan standard finishes but a complex roof, a second storey or a wet room, the standard rate may be too low, and a quote will show it. Enter a figure for those items in the extras input, so that the total reflects your plan and not only the average.
Frequently asked questions
How much does a home addition cost?
It depends on the size, the finish level and the site. At the example rates, a 300 ft² addition costs 52,500 at the basic level, 75,000 at standard and 112,500 at high-end. Use local quotes for a real figure.
What is included in the estimate?
The area times the rate for the finish level, plus the extras you enter for the foundation and utility hookups. Permits, design and a contingency are not included.
Why do kitchens and bathrooms cost more?
They need supply and drain lines, venting and waterproofing. Placing them near existing plumbing lowers the cost.
Is a second-story addition more expensive?
It adds structural work, roof removal, a new stair and protection of the floor below, so use a higher rate or add the extra cost to the extras input.
