Plastering Cost Calculator: Estimate by Area & Finish Type

Estimate the cost of plastering walls or ceilings from the surface area and the type of finish: a skim coat, traditional three-coat plaster or a decorative plaster.

Construction — Other Calculators

Plastering Cost Calculator

Wall/ceiling plastering cost from surface area and finish type.

Starting values: a surface of 500 ft² with a skim coat over drywall. The calculator gives 1,500.

How the calculator works

Total = surface area × cost per ft² for the finish

The cost per square foot is set by the finish:

  • Skim coat over drywall: 3 per ft²
  • Traditional three-coat plaster: 8.50 per ft²
  • Venetian or decorative plaster: 16 per ft²

These are example rates, so replace them with local quotes. The area has a unit selector, so you can enter square metres. The calculator has one rate for a surface, so it does not separate walls from ceilings, and it does not add anything for preparation or repair.

Worked examples

The same surface with three finishes

For 500 ft²:

  • Skim coat: 500 × 3 = 1,500.
  • Traditional three-coat plaster: 500 × 8.50 = 4,250.
  • Venetian or decorative plaster: 500 × 16 = 8,000.

The walls of a room

A room of 12 ft by 10 ft has a perimeter of 44 ft. With walls 8 ft high, the wall area is 44 × 8 = 352 ft². With traditional plaster, 352 × 8.50 = 2,992. If you want to subtract a door and a window, take them off the area first, as described below.

Walls and ceiling

The ceiling of the same room is 12 × 10 = 120 ft². A skim coat on the walls and the ceiling together covers 352 + 120 = 472 ft², which costs 472 × 3 = 1,416.

Adding preparation

A plastering cost guide says that walls that need holes filled, priming, sanding or repair of the lath behind old plaster need more preparation work, and that this can add 10 to 30 percent to the budget. For the 1,500 skim coat, that would be 1,650 to 1,950.

Measuring the area

For a room, multiply the perimeter by the wall height to get the wall area, and add the ceiling area, which is the length times the width. Subtract the openings if you want the plastered area only, such as a door of about 20 ft² and a window of about 15 ft². Plasterers often charge for the full wall and do not deduct small openings, so ask how your quote is measured. The wall area calculator and the room square footage calculator help with the measuring.

Walls or ceilings

The guide says ceilings usually cost more per square foot than walls, because they are harder to reach, and that height, ornamental designs and vaulted shapes push the price up. If your job includes a high or shaped ceiling, use a higher rate for it, and calculate it on its own.

The three finishes

  • Skim coat. A thin coat that smooths a surface or refreshes minor damage. It is the lowest-cost option, and it is applied over a sound surface such as drywall.
  • Traditional plaster. A fuller application in several coats that builds a harder, thicker surface.
  • Decorative plaster. Specialty materials such as Venetian, which is lime-based, and acoustic or waterproof plasters raise the material cost, and skilled work on textures and patterns raises the labour.

What else changes the price

The guide notes that removing existing plaster is more work than applying new plaster over a sound surface, and that older homes may need asbestos or lead paint to be handled safely, which is a significant extra cost. Professional plasterers charge by the hour or by the square foot, and the larger the area, the higher the total.

For a plain drywall surface, see the drywall calculator and the gypsum ceiling calculator. For an outside render, see the stucco cost calculator. For paint on top, see the paint coverage calculator.

Getting a quote you can compare

Plastering quotes are easiest to compare when each one states the same things. Ask every plasterer for the finish they plan to use, the area they measured, whether the price includes preparation and repairs, and whether the removal of old plaster is included. A quote that covers only the final coat will look cheaper than one that includes patching, priming and clean-up, even when the work is identical.

Checking the calculator against a quote

Divide the quoted total by your area to get the rate per square foot, and compare it with the rate you used in the calculator. If the quote is much higher, ask which items explain the gap, such as ceilings, height, a decorative finish or preparation. If it is much lower, check that the finish and the area match what you need. Doing this with two or three quotes gives you a better local rate than any example figure, and you can enter it in the calculator to test different room sizes.

Doing part of the work yourself

The guide notes that doing the job yourself avoids labour charges but needs tools, skill and time. A common middle route is to do the preparation, such as clearing the room and protecting floors, and leave the plastering itself to a professional. Ask the plasterer whether that changes the price.

Frequently asked questions

How much does plastering cost?

It depends on the area and the finish. At the example rates, 500 ft² costs 1,500 for a skim coat, 4,250 for traditional plaster and 8,000 for decorative plaster. Use local quotes for a real figure.

What is the difference between a skim coat and traditional plaster?

A skim coat is a thin coat that smooths or refreshes a sound surface such as drywall. Traditional plaster is a fuller application in several coats.

Do ceilings cost more to plaster than walls?

Usually yes. A plastering cost guide says ceilings are harder to reach, and that height and ornamental designs push the price up.

Does the estimate include preparation?

No. The guide says that filling holes, sanding or repairing the lath can add 10 to 30 percent to the budget, so add an allowance.

Mark Danny

Mark Danny

Mark Danny builds and maintains the free calculators and guides on Area of Irregular Shapes Calculator. Every calculator page explains its formula and shows a worked example, so you can check the working yourself. Spotted a mistake or have a suggestion? Email gulsher.hingoro101@gmail.com.

Articles: 559