Stucco Cost Calculator: Materials, Labor & Lath

A new stucco exterior is usually estimated per square foot of wall, with separate amounts for the stucco materials, the labour and the lath and moisture barrier underneath. This stucco cost calculator multiplies the wall area by the sum of those three rates. It starts with 1,800 ft² of wall at $4 materials, $5 labour and $1 lath, which are placeholders, so use the figures from your own quotes.

Painting & Finishing Calculators

Stucco Cost Calculator

Installed cost of a new stucco exterior — materials and labour per square foot of wall.

Example price — replace with your local quote.
Example price — replace with your local quote.

How do you calculate stucco cost?

Add the three per-square-foot rates and multiply by the wall area. The total covers the stucco materials, the labour to apply them and the lath and moisture barrier, and the three rates are explained under the formula.

Total = Wall area × (Materials + Labour + Lath)

Where:

  • Wall area = the area to be stuccoed, in square feet
  • Materials = the cost per ft² of the stucco coats
  • Labour = the installation cost per ft²
  • Lath = the cost per ft² of lath and moisture barrier, or 0 if it is already installed

Worked examples

Worked example: the starting values

Total = 1,800 × (4 + 5 + 1) = 1,800 × 10 = $18,000

Worked example: lath already in place

The same wall with the lath and barrier already installed, so the lath rate is 0:

Total = 1,800 × (4 + 5 + 0) = $16,200

Worked example: a larger job with higher rates

2,400 ft² of wall, materials $5, labour $7 and lath $1.50:

Total = 2,400 × (5 + 7 + 1.50) = 2,400 × 13.50 = $32,400

Wall area and total cost compared

At the $10 combined starting rate:

Wall area Total
1,200 ft² $12,000
1,800 ft² $18,000
2,400 ft² $24,000

How do you measure wall area?

Multiply the distance around the house by the wall height, then subtract the doors and windows. A house with 140 ft of outside wall and 9 ft walls has 140 × 9 = 1,260 ft². If doors and windows take 150 ft², the stucco area is 1,110 ft². For gable ends, add the area of each triangle, which is half the base times the height.

What each rate includes

Each of the three rates covers a different part of the job, so check them against your quote.

Materials

The calculator labels this as the scratch, brown and finish coats, the layers that make up a three-coat system. Ask your installer how many coats and what finish they use.

Labour

The cost of the crew to apply the coats and finish. Labour often differs between a plain finish and a textured or coloured one.

Lath and moisture barrier

The backing that holds the stucco and the barrier behind it. If you are re-stuccoing over an existing, sound backing, this may be 0, but confirm with your installer.

What the stucco cost calculator leaves out

The calculator does not add scaffolding, repairs to the wall behind, removal of old stucco, trim and flashing details, paint or sealer, or permits. It also assumes one rate for all walls. Ask each contractor what their price covers.

How do you compare stucco quotes?

Ask for a written quote showing the area, the system, the number of coats and what is included. Divide each total by the wall area to compare prices per square foot, and check that each quote covers the same work.

How do openings change the stucco area and cost?

Doors and windows reduce the area you pay to stucco, so measure the walls first and subtract them. Enter the net area in the calculator, because every rate is charged per square foot of wall that is actually stuccoed.

Worked example: a house with openings

A house with 160 ft of outside wall, 9 ft walls and 180 ft² of doors and windows, at the $10 starting rate:

Gross wall = 160 × 9 = 1,440 ft²
Stucco area = 1,440 − 180 = 1,260 ft²
Total = 1,260 × 10 = $12,600

Rate levels and total cost compared

For the 1,800 ft² starting wall, here are three combined rates. They are placeholders to show the spread, not market prices:

Combined rate Total
$8 per ft² $14,400
$10 per ft² $18,000
$13.50 per ft² $24,300

Where the money goes in the starting estimate

Splitting the $18,000 starting total by its three rates shows how the cost is shared:

Part Rate Cost
Materials $4 $7,200
Labour $5 $9,000
Lath and barrier $1 $1,800

If your quote shows a lump sum, divide it by the wall area to get one combined rate. If it lists the parts separately, enter each one in the matching box.

Worked example: adding a gable end

A gable is a triangle above the wall, with area half the base times the height. A 30 ft wide wall that is 9 ft high, with a gable 8 ft tall at the peak:

Wall = 30 × 9 = 270 ft²
Gable = 0.5 × 30 × 8 = 120 ft²
Area = 270 + 120 = 390 ft²
Total = 390 × 10 = $3,900

Add the area of each wall section you want stuccoed and enter the total.

Stucco system and finish choices

The system you pick changes the materials rate more than the labour rate, so settle it before you enter the numbers.

Costs that sit outside the three rates

The three rates cover the new stucco only. Other guides list extra costs that a quote may add as separate lines.

Frequently asked questions

When is the lath rate zero?

If sound lath and a moisture barrier are already in place, enter 0 and confirm with your installer, as the lath section explains.

Mark Danny

Mark Danny

Mark Danny builds and maintains the free calculators and guides on Area of Irregular Shapes Calculator. Every calculator page explains its formula and shows a worked example, so you can check the working yourself. Spotted a mistake or have a suggestion? Email gulsher.hingoro101@gmail.com.

Articles: 559