Patio cost depends mostly on the surface you choose, because installed prices run from a few dollars per square foot for gravel to over thirty for natural stone. This patio cost calculator multiplies your patio area by a fixed rate for poured concrete, pavers, natural stone or gravel.
Patio Cost Calculator
Patio installation cost from area and surface material — concrete, pavers, natural stone or gravel.
The starting values are 300 sq ft of pavers at $20 per sq ft, which gives $6,000.
How is patio cost calculated?
The calculator picks one rate for the material you choose and multiplies it by the area.
Total = Patio area × Rate per sq ft for the material
The built-in rates are $10 per sq ft for poured concrete, $20 for pavers, $32 for natural stone and $7 for gravel. There is no field for base preparation, shape or removal.
Worked example: the starting values
Total = 300 × 20 = $6,000
How area and material change the cost
The table shows three patio sizes at each of the four built-in rates.
| Area | Gravel ($7) | Concrete ($10) | Pavers ($20) | Natural stone ($32) |
|---|---|---|---|---|
| 150 sq ft | $1,050 | $1,500 | $3,000 | $4,800 |
| 300 sq ft | $2,100 | $3,000 | $6,000 | $9,600 |
| 500 sq ft | $3,500 | $5,000 | $10,000 | $16,000 |
On a 300 sq ft patio the choice between gravel and natural stone is a difference of $7,500, which is larger than the cost of any of the other decisions you will make about the patio.
Measuring the patio
A rectangle is length times width, so a 15 × 20 ft patio is 300 sq ft. An L-shaped patio is the sum of two rectangles, such as 20 × 12 plus 8 × 10, which is 240 + 80 = 320 sq ft. A circle uses 3.1416 × radius squared, so a circle 10 ft across is 3.1416 × 5 × 5 = 78.54 sq ft and costs $1,570.80 in pavers. Enter the area, not the shape, since the calculator multiplies one rate by one area.
What the surface choices mean
Gravel is the cheapest and the quickest to lay, but it needs edging to stay in place and tends to move under foot. Poured concrete gives a firm, even surface, and pavers give a similar surface that can be lifted and relaid. Natural stone is the most expensive and varies the most from one stone to another. Choose by the look you want and the upkeep you will accept, then use the calculator to see the price of each.
What the rate leaves out
The built-in rates are placeholders for a finished surface. They do not cover removal of an old patio, grading a sloping site, steps, walls, drainage, lighting or a cover, and a patio on difficult ground costs more than one on level ground. Ask each contractor for a written quote that lists these items, and enter the quoted total in place of the estimate when you compare bids.
Comparing a quote with the estimate
Divide a contractor’s quote by the patio area to get a price per square foot, and compare it with the rate for the surface you chose. If the figure is higher, ask what is included, since excavation, base preparation, drainage, edging and the removal of old material are often separate lines. If it is lower, check the depth of the base, because a thin base is the most common reason a patio settles or cracks later.
Keep the area and the surface in one place and update them if the plan changes, so that you can see how a change from pavers to concrete, for example, moves the budget by $3,000 on a 300 sq ft patio.
Frequently asked questions
What is not included in the estimate?
Base preparation, removal of an old patio, permits, shape and add-ons such as covers.
How much more is natural stone than gravel?
At the built-in rates, 300 sq ft costs $2,100 in gravel and $9,600 in natural stone, a difference of $7,500.
How do I find the area of a patio that is not a rectangle?
Split it into rectangles, add their areas and enter the total. A circle uses 3.1416 × radius squared, so a 10 ft circle is 78.54 sq ft.
Can I enter the price from a contractor?
Divide the quote by the area and compare it with the closest rate, or multiply the area by the quoted rate yourself, since the material menu sets the rate.
