Topsoil is sold by the cubic yard, but your garden or lawn is measured in square feet and inches. This topsoil calculator converts the area and the depth you want into cubic yards, then multiplies by your price per cubic yard for an estimated cost.
Topsoil Calculator
Cubic yards of topsoil needed for an area and depth, plus estimated cost.
The starting values are 500 sq ft at 4 inches deep and $35 per cubic yard, which gives 6.17 cubic yards and $216.05.
How is the amount of topsoil calculated?
Convert the depth from inches to feet, find the volume in cubic feet, then divide by 27 cubic feet per cubic yard.
Cubic yards = Area (sq ft) × Depth (in) ÷ 12 ÷ 27
Cost = Cubic yards × Price per cubic yard
Setting the price to 0 skips the cost. The calculator does not add a settling allowance.
Worked example: the starting values
Volume = 500 × (4 ÷ 12) = 166.67 cu ft
Cubic yards = 166.67 ÷ 27 = 6.17
Cost = 6.17 × 35 = $216.05
Worked examples for different jobs
Worked examples
A new lawn at 6 inches
Enter 500 sq ft at 6 inches. The volume is 250 cu ft, which is 9.26 cubic yards, and at $35 the cost is $324.07.
A thin overseeding layer
Enter 500 sq ft at 2 inches. The volume is 83.33 cu ft, or 3.09 cubic yards, costing $108.02.
How area, depth and price change the amount and cost
The table keeps the 4 inch depth and the $35 price and changes the area.
| Area | Cubic feet | Cubic yards | Cost at $35 |
|---|---|---|---|
| 200 sq ft | 66.67 | 2.47 | $86.42 |
| 500 sq ft | 166.67 | 6.17 | $216.05 |
| 1,000 sq ft | 333.33 | 12.35 | $432.10 |
The price per cubic yard
For the 6.17 cubic yards of the starting values, a price of $30, $35 and $45 per cubic yard gives $185.19, $216.05 and $277.78. Prices vary with the quality of the soil and with the delivery distance, so use the figure from your supplier.
Allowing for settling
The calculator does not add an allowance, but loose soil settles after it is spread and watered. If you add 10% to the 6.17 cubic yards, you order 6.79 cubic yards, which costs $237.65 at $35. A level surface at the right depth after settling is worth a small extra order.
Measuring an irregular bed
Split the bed into rectangles, find each area and add them. A bed of 12 × 8 ft plus a bed of 6 × 5 ft is 96 + 30 = 126 sq ft. At 4 inches that is 126 × 4 ÷ 12 ÷ 27 = 1.56 cubic yards, costing $54.44 at $35.
Metric units
One cubic yard is 0.7646 cubic meters, so the 6.17 cubic yards of the starting values is about 4.72 cubic meters.
Choosing the depth
The right depth depends on what you are doing. A thin layer of 1 to 2 inches suits a top-up over an existing lawn, while a new lawn or garden bed needs more, and the depth you need also depends on the soil underneath. Check with your supplier or a local gardening service if you are unsure.
Using the result with a supplier
Suppliers deliver by the cubic yard and often have a minimum load, so ask for the minimum before you order. If your result is a little under a round number, such as 6.17 cubic yards, it is usually worth rounding up to 6.5 or 7 so that you do not run short in the middle of the job. Ask also whether the soil is screened, because screened topsoil is free of stones and lumps and spreads more evenly, and whether it is delivered loose or by the bag, which changes the price per cubic yard.
Spreading it
Rake the soil out to an even depth, check the depth with a ruler in several places and water it so that it settles before you seed or plant. If the depth is uneven, enter the average and add a small allowance for the low spots.
Frequently asked questions
How do I calculate how much topsoil I need?
Multiply area in sq ft by depth in feet to get cubic feet, then divide by 27 to get cubic yards.
How much topsoil do I need for 1,000 sq ft at 4 inches?
It is 333.33 cubic feet, or 12.35 cubic yards, which costs $432.10 at $35 per cubic yard.
Should I order extra topsoil for settling?
The calculator adds none. Adding 10% to 6.17 cubic yards gives 6.79 cubic yards, which costs $237.65 at $35.
How do I convert cubic yards to cubic meters?
Multiply by 0.7646. The 6.17 cubic yard starting result is about 4.72 cubic meters.
