Work out how much sod a lawn needs, including a waste allowance and the number of pallets, or estimate the installed cost from the lawn area.
Sod Calculator
Sod pallets/rolls needed for a lawn area, and the installed cost — or just the material quantity.
Starting values: a lawn of 3,000 ft² with a 5 percent waste allowance. That is 3,150 ft² of sod, which is 7 pallets at 500 ft² each. The cost mode starts at an installed price of 0.90 per ft², which gives 2,700.
How the calculator works
Quantity mode
Sod needed = lawn area × (1 + waste ÷ 100)
Pallets = sod needed ÷ 500 ft², rounded up
The calculator assumes a pallet of 500 ft². Pallet sizes differ, so check the size your supplier uses, as described below.
Cost mode
Total = lawn area × installed cost per ft²
The installed cost per square foot is your own input, and the starting value of 0.90 is an example. It does not add a waste allowance, so raise the area yourself if you want the cost of the extra sod.
Worked examples
The starting lawn
3,000 × 1.05 = 3,150 ft². Dividing by 500 gives 6.3, which rounds up to 7 pallets.
A small lawn with more waste
A lawn of 1,200 ft² with 10 percent waste needs 1,200 × 1.10 = 1,320 ft². That is 2.64 pallets of 500 ft², which rounds up to 3 pallets.
Different pallet sizes
A sod supplier guide says a pallet usually covers 400 to 700 ft², depending on the farm. For the 3,150 ft² job, pallets of 400 ft² would mean 7.9, so 8 pallets, and pallets of 700 ft² would mean 4.5, so 5 pallets. Ask the supplier for the real pallet coverage before you order.
Cost of a lawn
A lawn of 1,500 ft² at an installed price of 1.10 per ft² costs 1,500 × 1.10 = 1,650. Use a figure from a quote, since the starting value is only an example.
Measuring the lawn
Multiply length by width for a rectangle. For an irregular lawn, split it into rectangles, triangles and circles, find the area of each and add them. Subtract beds, paths and any area that will not be sodded. For a lawn with curved edges, the lawn and yard area calculator and the irregular lot area calculator can help with the area before you use this tool.
How much waste to allow
The same supplier guide advises ordering 5 to 10 percent more than the measured area to cover waste and measurement error. The calculator starts at 5 percent. A lawn with many curves, tight corners or edges to trim wastes more, so use a higher figure for those jobs.
Sod pieces and delivery
The guide describes three common formats. Slabs are about 2.66 ft² each, mini rolls about 5 ft² and large rolls about 10 ft², with pallets of large rolls running from 500 to 700 ft². A pallet can weigh roughly 1,500 to 3,000 lb, and wet sod can weigh about half as much again, so check your vehicle before you collect an order. Most buyers have the sod delivered.
Related materials
The soil under the sod matters as much as the sod. For the soil, see the topsoil calculator and the loam calculator. To compare with artificial grass, see the artificial turf cost calculator.
Choosing the format and planning the install
Ask the supplier which format they sell, since the number of pieces depends on it. A lawn of 3,150 ft² needs about 630 mini rolls of 5 ft², or about 315 large rolls of 10 ft², or about 1,184 slabs of 2.66 ft². The calculator gives the area and the pallets, and the pieces follow from the size of the piece.
Prepare the ground first
Sod is laid on prepared soil, so the soil, the grade and the area to be covered should be ready before the delivery arrives. Measure the area after you have cleared it, so the quantity is for the ground that will really be covered, and order the sod for a date when you can lay it. A pallet is heavy, and the guide says it can weigh roughly 1,500 to 3,000 lb, so plan where it will be placed and how it will be moved.
Comparing the cost of options
The cost mode multiplies the area by an installed price per square foot. To compare the sod with another option, calculate the cost of both for the same area. For artificial grass, use the artificial turf cost calculator, and for the yearly cost of keeping a lawn, use the lawn care cost calculator. The calculator does not include soil preparation, a delivery charge or the time spent mowing and watering a new lawn, so add them if they apply.
After the sod is down
Once the sod is laid, press it firmly onto the soil so the roots make contact, and water it well. Keep a note of the area and the pallets you used, so that if you need to patch a bare spot later you know how much to order.
Frequently asked questions
How much sod do I need?
Measure the lawn area and add a waste allowance. A lawn of 3,000 ft² with 5 percent waste needs 3,150 ft² of sod.
How many square feet are on a pallet of sod?
A sod supplier guide says a pallet usually covers 400 to 700 ft², depending on the farm. The calculator assumes 500 ft², so check with your supplier.
How much extra sod should I order?
The same guide advises 5 to 10 percent more than the measured area. Use more for a lawn with many curves or edges to trim.
How do I measure an irregular lawn?
Split it into simple shapes, find the area of each, add them and subtract any beds or paths that will not be sodded.
