Irregular Lot Area Calculator – 4 Sides, Offsets, Coordinates or Rectangles

Find the area and acreage of an irregular lot from four sides and a diagonal, or from corner coordinates, offsets along a baseline or a sum of rectangles. Choose the method that matches how you measured the land.

Shape Calculators

Irregular Lot Area Calculator

Area of any irregular shape from corner coordinates, four sides and a diagonal, survey offsets, or by adding up rectangles — in m², ft², acres and more.

Coordinates in
One corner per line as x, y — in order around the shape (clockwise or anticlockwise).

The calculator defaults to metres and has four modes. The starting values are a five-corner outline entered as coordinates, a four-sided plot with sides of 12, 9, 10 and 8 and a diagonal of 13, a row of seven offsets spaced 5 apart, and two rectangles of 6 by 4 and 3 by 2. Pick the mode that fits your measurements and enter your own numbers.

The four methods

Corner coordinates mode takes the x and y position of each corner and returns the area and perimeter. The 4 sides plus diagonal mode takes the four sides of a lot and one diagonal. Offsets mode takes measurements at regular spacing from a straight baseline, which suits a curved boundary such as a river bank, a pond edge or a road frontage. Add up rectangles mode takes the length and width of up to four rectangular parts and sums them. If you prefer to draw or trace a shape on a map or photo, the main irregular shape area calculator does that.

The formulas

Shoelace area = ½ × |Σ (xi × yi+1 − xi+1 × yi)|

Heron triangle area = √(s × (s − a) × (s − b) × (s − c)), where s = (a + b + c) / 2

Trapezoidal rule = d × [(h0 + hn) / 2 + h1 + h2 + and so on up to hn−1]

Simpson rule = (d / 3) × [h0 + hn + 4 × (odd offsets) + 2 × (even offsets)]

Here d is the spacing between offsets, h0 to hn are the offset measurements, and a, b and c are the sides of a triangle. The shoelace formula needs a closed outline with the points in a consistent order. Simpson rule needs an even number of intervals, and it is usually more accurate on a curved boundary.

Worked example: corner coordinates

The starting corners are (0, 0), (12, 0), (14, 7), (6, 11) and (−1, 6).

Cross terms: 0 + 84 + 112 + 47 + 0 = 243

Area = 243 / 2 = 121.5 m²

Perimeter = 12 + 7.28 + 8.94 + 8.60 + 6.08 = 42.91 m

The points run counterclockwise around the outline. The absolute value in the formula keeps the area positive in either direction.

Worked example: a lot from four sides and a diagonal

Take a lot with sides a = 12, b = 9, c = 10 and d = 8, and a diagonal of 13. Sides a and b meet the diagonal at one end, and sides c and d meet it at the other. The diagonal splits the lot into two triangles.

Triangle 1 has sides 12, 9 and 13. Here s = 17 and the area = √(17 × 5 × 8 × 4) = √2720 = 52.15 m²

Triangle 2 has sides 10, 8 and 13. Here s = 15.5 and the area = √(15.5 × 5.5 × 7.5 × 2.5) = √1598.44 = 39.98 m²

Total area = 52.15 + 39.98 = 92.13 m²

The diagonal is essential. Four side lengths alone do not fix a quadrilateral, because the shape can flex and change its area, so a measured diagonal locks it in place. This is the usual situation with a lot, where you can pace or tape the boundary and one line across it.

From square metres or feet to acres

Lot sizes are often quoted in acres. One acre is 43,560 square feet, or about 4,046.86 square metres.

Suppose the same lot is measured in feet, with sides of 120, 90, 100 and 80 and a diagonal of 130. Every length is ten times larger, so the area is a hundred times larger: 9,213.4 ft². Divide by 43,560 and the lot is about 0.2115 acre.

The starting lot in metres, at 92.13 m², is about 0.0228 acre. Always keep the unit the same for every side and the diagonal before converting the final area.

Worked example: offsets along a baseline

Seven offsets of 0, 4.2, 5.1, 6.3, 5.8, 4.4 and 0, spaced 5 apart, describe a boundary with six intervals.

Trapezoidal: 5 × (0 + 4.2 + 5.1 + 6.3 + 5.8 + 4.4 + 0) = 5 × 25.8 = 129 m²

Simpson: (5 / 3) × [0 + 0 + 4 × (4.2 + 6.3 + 4.4) + 2 × (5.1 + 5.8)] = (5 / 3) × 81.4 = 135.67 m²

The two answers differ by about 5%. Simpson rule fits a curve through the points, so it usually suits a curved edge better, while the trapezoidal rule joins the points with straight lines and cuts across the curve.

Worked example: adding rectangles

Take two rectangles, 6 by 4 and 3 by 2, with the third and fourth left at 0. The area is 24 + 6 = 30 m². A part of zero size is ignored.

Which method to choose

  • Use coordinates if you can measure the position of every corner from one origin. It also gives the perimeter.
  • Use 4 sides plus a diagonal if you can only measure along the edges of a four-sided lot.
  • Use offsets for a boundary that curves, taking measurements at regular spacing and preferring Simpson rule.
  • Use rectangles for a room, yard or building footprint that splits easily into rectangular parts, which also makes a handy cross-check.

Getting accurate measurements

Use one unit throughout and keep the corner order consistent. For offsets, a smaller spacing follows the curve more closely, and Simpson rule needs an even number of intervals, which means an odd number of measurements. If a lot has a hole, such as a pond in a lawn, work out the outer area and the hole separately and subtract.

Area is not the same as material to buy

The result is the surface area of the lot or shape. When you buy turf, paving or fencing, add an allowance for cuts and waste, which depends on the material and the layout.

Frequently asked questions

How do I calculate the acreage of an irregular lot?

Find the area in square feet, then divide by 43,560. A lot with sides of 120, 90, 100 and 80 feet and a 130 foot diagonal has an area of 9,213.4 ft², which is about 0.2115 acre.

Can I find the area of a four-sided irregular shape from its sides alone?

No. Four sides do not fix the shape, because it can flex without changing the side lengths. Add one diagonal and use Heron formula on the two triangles. Sides of 12, 9, 10 and 8 with a diagonal of 13 give 92.13 m².

What is the difference between the trapezoidal rule and Simpson rule?

The trapezoidal rule joins offsets with straight lines, while Simpson rule fits curves and needs an even number of intervals. For the starting offsets the trapezoidal rule gives 129 m² and Simpson rule gives 135.67 m².

What units does the calculator use?

It defaults to metres, so areas come out in square metres. Use one unit for every measurement, since the calculator does not convert between units for you.

Mark Danny

Mark Danny

Mark Danny builds and maintains the free calculators and guides on Area of Irregular Shapes Calculator. Every calculator page explains its formula and shows a worked example, so you can check the working yourself. Spotted a mistake or have a suggestion? Email gulsher.hingoro101@gmail.com.

Articles: 559