SEER Savings Calculator: Yearly kWh, Cost and Payback From a Higher SEER

Estimate the electricity and money you would save by replacing an air conditioner with a higher SEER unit. Enter the capacity, running hours, old and new SEER and your electricity price, and the calculator shows the yearly saving and the payback.

Games, Hobby & Planning Tools Calculators

SEER Savings Calculator

Estimate the yearly kWh and cost saved by upgrading an air conditioner from an old SEER to a new SEER, with payback.

The figures are examples. Use your own capacity, hours and price.

Starting values: a 36,000 BTU per hour system (3 tons) running 1,500 full-load hours a year, upgraded from SEER 10 to SEER 16 at $0.15 per kWh with an installed cost of $6,000. That saves 2,025 kWh and $303.75 a year, with a simple payback of about 19.8 years.

How the saving is calculated

SEER is the cooling output in BTU for each watt-hour of electricity used, so a higher SEER means less electricity for the same cooling. The calculator works out the energy for each unit and takes the difference:

Cooling energy (kWh) = capacity in BTU per hour × full-load hours ÷ (SEER × 1,000)

Energy saved = old unit kWh − new unit kWh

Money saved = energy saved × electricity price per kWh

Simple payback (years) = installed cost ÷ money saved per year

Where the capacity can be entered in BTU per hour or in tons, with one ton equal to 12,000 BTU per hour. The full-load hours are the hours the system would need to run at full output to deliver the year of cooling, and they are not the same as the hours the unit is switched on.

Worked examples

The starting example

The old SEER 10 unit uses 36,000 × 1,500 ÷ (10 × 1,000) = 5,400 kWh, which costs 5,400 × 0.15 = $810. The new SEER 16 unit uses 36,000 × 1,500 ÷ (16 × 1,000) = 3,375 kWh, which costs $506.25. The saving is 2,025 kWh, or $303.75 a year, which is 37.5 percent less electricity. With an installed cost of $6,000 the simple payback is 6,000 ÷ 303.75 = 19.8 years.

A smaller gain at a higher price

A 3 ton system with 1,000 full-load hours, upgraded from SEER 13 to SEER 18 at $0.20 per kWh. The old unit uses 36,000 × 1,000 ÷ 13,000 = 2,769 kWh and the new one 2,000 kWh, a saving of 769 kWh, or about $153.85 a year. At an installed cost of $8,000 the payback is 8,000 ÷ 153.85 = about 52 years, so on energy alone this upgrade would not pay for itself.

Entering the size in tons

A 2 ton unit is 24,000 BTU per hour. At 1,200 hours, SEER 14 uses 24,000 × 1,200 ÷ 14,000 = 2,057 kWh, and SEER 18 uses 1,600 kWh. The saving is about 457 kWh a year, which at $0.15 is about $68.57.

No saving

If the new SEER is the same as or lower than the old one, the calculator says there is no saving and does not show a payback.

Where the numbers come from

The capacity is on the unit nameplate or in the installer quote. The electricity price is on your bill, and a blended price per kWh that includes all charges is more realistic than the headline energy rate. The old SEER is on the old unit label or its documents, and if you cannot find it, an installer can give a reasonable estimate. The full-load hours are the hardest figure, so try a low, middle and high value to see the range.

How full-load hours change the result

The saving is directly proportional to the hours. In the starting example, halving the hours to 750 halves the saving to 1,012.5 kWh, or $151.88, and doubles the payback to about 39.5 years. A hot climate with long cooling seasons shortens the payback, while a mild one lengthens it.

What the payback does not include

The simple payback divides the cost by the first-year saving. It does not include rising electricity prices, financing costs, rebates or tax credits, maintenance, the age or condition of the old unit, or comfort and humidity control. It also ignores part-load operation, because the formula treats the unit as running at a fixed rating. Treat the result as a first estimate for comparing options, then ask installers for quotes and for the figures they use.

Using the same rating scale

Make sure the old and new ratings are on the same basis. If the new unit is quoted in a newer test standard such as SEER2, compare it with the old unit on a like-for-like figure or an installer conversion, and not against a number from a different scale.

Comparing quotes

When two installers quote different units, enter each SEER and each installed cost in turn and compare the payback and the yearly saving side by side. A higher SEER usually costs more, so the extra saving from the better unit has to be weighed against the extra price. Keep the capacity, hours and electricity price the same between runs so that only the SEER and the cost change.

Frequently asked questions

How do I calculate the energy saved by a higher SEER?

Work out kWh for each unit as BTU per hour × full-load hours ÷ (SEER × 1,000) and subtract. For 36,000 BTU and 1,500 hours, SEER 10 uses 5,400 kWh and SEER 16 uses 3,375 kWh, a saving of 2,025 kWh.

How many BTU is one ton of cooling?

One ton is 12,000 BTU per hour, so a 3 ton system is 36,000 BTU per hour. The calculator accepts either unit.

What are full-load cooling hours?

They are the hours the system would need to run at full capacity to deliver your yearly cooling. It is usually lower than the hours the unit is switched on, so use an estimate and test a range.

Why is my payback so long?

Payback is the installed cost divided by the yearly electricity saving. A small SEER gain, cheap electricity or few cooling hours give a small saving, so the payback is long, and other benefits are not counted.

Mark Danny

Mark Danny

Mark Danny builds and maintains the free calculators and guides on Area of Irregular Shapes Calculator. Every calculator page explains its formula and shows a worked example, so you can check the working yourself. Spotted a mistake or have a suggestion? Email gulsher.hingoro101@gmail.com.

Articles: 559