5e CR Calculator: Encounter Difficulty From Monster CR and Party Level

Check how hard a D&D 5e encounter is from the monsters challenge ratings and your party size and level. The calculator adds the monster XP, applies the multiplier and compares the result with your party thresholds.

Games, Hobby & Planning Tools Calculators

5e CR Calculator

D&D 5e encounter difficulty from monster challenge ratings and party size and level: XP, multiplier, thresholds and difficulty.

Uses the 2014 Dungeon Master's Guide method. The DM decides how hard an encounter really is.

Starting values: 4 characters at level 3 facing monsters with challenge ratings 1/2, 1/2 and 1. That is 400 base XP, multiplied by 2 to 800 adjusted XP, which is a Medium encounter.

How encounter difficulty is worked out

The tool follows the encounter-building method of the 2014 core DMG. It has four steps:

  1. Add the XP value of every monster, taken from its challenge rating.
  2. Pick a multiplier from the number of monsters, then shift it by party size.
  3. Multiply the base XP by the multiplier to get the adjusted XP.
  4. Compare the adjusted XP with the party thresholds for Easy, Medium, Hard and Deadly.

Adjusted XP = base XP × multiplier

Party threshold = per-character threshold for the level × number of characters

Challenge rating to XP

CR 0 is 10 XP, CR 1/8 is 25, CR 1/4 is 50, CR 1/2 is 100, CR 1 is 200, CR 2 is 450, CR 3 is 700, CR 4 is 1,100 and CR 5 is 1,800. The calculator covers every rating from 0 to 30.

The multiplier

The multiplier depends on how many monsters there are: 1 monster × 1, 2 monsters × 1.5, 3 to 6 monsters × 2, 7 to 10 monsters × 2.5, 11 to 14 monsters × 3 and 15 or more × 4. For a party of fewer than 3 characters the multiplier moves up one step, and for a party of more than 5 it moves down one step, down to × 0.5.

Worked examples

The starting example

Monsters CR 1/2, 1/2 and 1 give 100 + 100 + 200 = 400 base XP. Three monsters give × 2, so the adjusted XP is 800. For 4 characters at level 3 the per-character thresholds are 75, 150, 225 and 400, so the party thresholds are 300, 600, 900 and 1,600. 800 is above Medium (600) and below Hard (900), so the encounter is Medium. The XP award is 400 ÷ 4 = 100 XP per character.

One strong monster

A single CR 5 monster is 1,800 XP with a × 1 multiplier. For 4 characters at level 5 the thresholds are 1,000, 2,000, 3,000 and 4,400. 1,800 is above Easy and below Medium, so it is an Easy encounter.

A swarm of small monsters

Six CR 1/4 monsters are 6 × 50 = 300 base XP. Six monsters give × 2, so the adjusted XP is 600. For 5 characters at level 3 the thresholds are 375, 750, 1,125 and 2,000, so 600 is also Easy. You can enter these as 6×1/4.

A small party

Two level 1 characters face two CR 1/2 monsters: 200 base XP. Two monsters would be × 1.5, but a party of fewer than 3 moves it up to × 2, so the adjusted XP is 400. The thresholds are 50, 100, 150 and 200, so this is Deadly, with 400 well above 200.

A large party

Six level 4 characters face one CR 3 monster: 700 XP. A party of more than 5 moves the × 1 down to × 0.5, so the adjusted XP is 350. The thresholds start at 750, so this is below Easy.

How to enter the monsters

Type the challenge ratings separated by spaces, commas or semicolons, such as 1/2 1/2 1. Use a count with an x for repeats, such as 3×1/4 2 for three CR 1/4 monsters and one CR 2. Fractions are limited to 1/8, 1/4 and 1/2, and the party level must be between 1 and 20.

XP awards and the multiplier

The multiplier only measures difficulty. The XP given to the party is the base XP shared equally, so the 400 base XP above gives 100 each. The calculator shows this separately so that the two figures are not mixed up.

Limits of the method

Challenge rating is a rough guide. The terrain, the order of initiative, the use of resources earlier in the day, healing, special abilities and clever tactics can all make a fight easier or harder than the label suggests. Later rules revisions use a different method, and this calculator follows the 2014 one, so check which rules your table uses. The DM makes the final call.

Reading the result

The difficulty label shows where the adjusted XP falls against the four party thresholds. It is a position on a scale, not a prediction of who wins. Adjusted XP just under a threshold is close to the next label, so treat an encounter that is a few points below Hard as nearly Hard. Try changing one monster or the party size and watch how the label moves.

Frequently asked questions

How do I calculate encounter difficulty in 5e?

Add the monster XP from their challenge ratings, multiply by the monster-count multiplier, and compare the result with the party Easy, Medium, Hard and Deadly thresholds for their level and size.

Why does a party of fewer than three change the multiplier?

Smaller parties find the same fight harder, so the multiplier moves up one step. Parties of more than five move it down one step.

Is the XP award multiplied as well?

No. The award is the base XP of the monsters shared equally between the characters. The multiplier is only used to judge difficulty.

Can I enter fractional challenge ratings?

Yes, 1/8, 1/4 and 1/2 are accepted, along with whole numbers from 0 to 30. Use 3×1/4 to enter three monsters of the same rating.

Mark Danny

Mark Danny

Mark Danny builds and maintains the free calculators and guides on Area of Irregular Shapes Calculator. Every calculator page explains its formula and shows a worked example, so you can check the working yourself. Spotted a mistake or have a suggestion? Email gulsher.hingoro101@gmail.com.

Articles: 559