HAVS Calculator: Hand-Arm Vibration Exposure Points and A(8)

Add up daily hand-arm vibration exposure for one or more tools as exposure points and A(8), and see how long a tool can be used before it reaches the action and limit values.

Games, Hobby & Planning Tools Calculators

HAVS Calculator

Hand-arm vibration exposure points and A(8) for one or more tools, and the trigger time to reach the action and limit values.

Use the vibration data for the tool in use. This is not a risk assessment.

Starting values: two tools, one at 5.5 m/s² for 2 hours of trigger time and one at 3 m/s² for 1 hour. That adds up to 139 exposure points and an A(8) of about 2.95 m/s², which is above the action value and below the limit value. This tool is a calculation aid and is not a risk assessment.

How exposure is calculated

Each tool has a vibration magnitude in metres per second squared and a trigger time, which is the time the tool is actually running in the hands. The calculator gives each tool a number of points and adds them:

Exposure points = 2 × magnitude² × hours

A(8) = √(sum of magnitude² × hours ÷ 8)

A(8) is the daily exposure normalised to an 8 hour day. The calculator compares the result with two values used in UK and EU rules: the exposure action value of 2.5 m/s² A(8), which is 100 points, and the exposure limit value of 5 m/s² A(8), which is 400 points.

The second mode works out the trigger time that reaches each value for a single tool:

Time to a value = 8 hours × (value ÷ magnitude)²

Worked examples

The starting example

Tool 1: 2 × 5.5² × 2 = 2 × 30.25 × 2 = 121 points. Tool 2: 2 × 3² × 1 = 18 points. The total is 139 points. For A(8), the sum of magnitude² × hours is 60.5 + 9 = 69.5, and √(69.5 ÷ 8) = √8.6875 = 2.95 m/s². That is above 100 points and below 400, so the result is at or above the action value and below the limit value.

Time to reach the values

For a tool at 5 m/s², the action value is reached after 8 × (2.5 ÷ 5)² = 2 hours and the limit value after 8 × (5 ÷ 5)² = 8 hours.

For a tool at 3 m/s², the action value takes 8 × (2.5 ÷ 3)² = 5.56 hours and the limit value takes 8 × (5 ÷ 3)² = 22.2 hours, which is more than a working day.

For a tool at 10 m/s², the action value is reached in 0.5 hours, which is 30 minutes, and the limit value in 2 hours.

Checking with points

One hour at 5 m/s² is 2 × 25 × 1 = 50 points, so two hours gives the 100 points of the action value. One hour at 3 m/s² is only 18 points, and 3 m/s² for 2 hours is 36 points. A tool at 4 m/s² for 3 hours is 2 × 16 × 3 = 96 points, just under the action value.

How to enter the tools

In the daily exposure mode, type one tool per line, with the vibration magnitude first and the trigger time in hours second, such as 5.5 2. The magnitude should come from the data for the tool you are using. Trigger time is the time the tool is actually running in your hands, which is usually shorter than the time spent on the job.

Why magnitude matters more than time

Because the magnitude is squared, doubling it quadruples the points for the same time. A tool at 10 m/s² gives the same points in 30 minutes as one at 5 m/s² gives in 2 hours. Choosing a lower vibration tool or one with better data has a larger effect than a small cut in time.

What this tool does not do

It does not choose a magnitude for you, it does not assess the whole job, and it does not replace the duties set by your own regulations. A result below the action value does not mean there is no risk, and a result above it is a reason to look at controls, health checks and information, with your safety adviser. Use the figures for your actual tools and ask a competent person about your legal duties.

Reducing exposure

The calculation shows which tool and which job drives the total. In the starting example the 5.5 m/s² tool gives 121 of the 139 points, so shortening its trigger time has more effect than changing the other tool. If that tool were used for 1 hour instead of 2, it would give 60.5 points and the total would fall to 78.5, which is below the action value of 100. Rotating jobs, choosing lower vibration tools, keeping tools in good order and cutting the trigger time all reduce the points, and your safety adviser can say what is suitable for your work.

Frequently asked questions

How do I calculate HAVS exposure points?

Use points = 2 × magnitude² × hours for each tool and add them. A tool at 5.5 m/s² for 2 hours gives 121 points.

What are the action and limit values for hand-arm vibration?

The exposure action value is 2.5 m/s² A(8), which is 100 points, and the exposure limit value is 5 m/s² A(8), which is 400 points, as used in UK and EU rules.

How long can I use a tool at 5 m/s²?

You reach the action value after 2 hours of trigger time and the limit value after 8 hours, using 8 × (value ÷ magnitude)².

What is trigger time?

It is the time the tool is actually running while you hold it, not the length of the job or the working day.

Mark Danny

Mark Danny

Mark Danny builds and maintains the free calculators and guides on Area of Irregular Shapes Calculator. Every calculator page explains its formula and shows a worked example, so you can check the working yourself. Spotted a mistake or have a suggestion? Email gulsher.hingoro101@gmail.com.

Articles: 559