Convert Minecraft Overworld coordinates to Nether coordinates and back using the 8 to 1 ratio. Enter X, Y and Z and the calculator shows where to build a portal so that it links where you want.
Nether Coordinates Calculator
Convert Minecraft Overworld coordinates to Nether coordinates and back using the 8 to 1 ratio, for portal linking.
Starting values: Overworld coordinates 1000, 64, −250, which convert to Nether coordinates 125, 64, −32. Try your own base coordinates and choose the direction of the conversion.
How the conversion works
One block in the Nether covers 8 blocks of the Overworld along the X and Z axes, so travelling in the Nether is a shortcut. The height is not scaled.
Overworld to Nether: X = floor(X ÷ 8), Z = floor(Z ÷ 8), Y unchanged
Nether to Overworld: X = X × 8, Z = Z × 8, Y unchanged
Where floor rounds down to the next whole number, which matters for negative coordinates. Going from the Nether to the Overworld, each Nether block covers a strip of 8 Overworld blocks, so the calculator shows the lower edge of the range first.
Worked examples
Overworld to Nether
For 1000, 64, −250: 1000 ÷ 8 = 125 exactly, and −250 ÷ 8 = −31.25, which rounds down to −32. Y stays at 64. The Nether coordinates are 125, 64, −32.
Why negative numbers round the way they do
Rounding down means moving toward the more negative number, so −31.25 becomes −32, not −31. This is a common source of off-by-one mistakes when people round toward zero.
Nether to Overworld
From the Nether point 125, 64, −32: X = 125 × 8 = 1000 to 1007, and Z = −32 × 8 = −256 to −249. The lower edge is 1000, 64, −256. Converting there and back does not return the original −250, because the conversion loses the remainder.
A Nether highway
Two bases lie at X = 2,400 and X = −1,600 in the Overworld, 4,000 blocks apart. In the Nether the same journey is 4,000 ÷ 8 = 500 blocks, so a tunnel of 500 blocks connects them.
The height stays the same
The Y value is carried over unchanged. The Nether is a much shorter dimension than the Overworld, so a Y that makes sense on the surface may not suit the Nether. Choose a height that fits, and check the surroundings when you build the portal.
How portal linking works
When you step through a portal, the game converts your position and looks for an existing portal near the target. On Java Edition the community wiki describes a search of about 128 blocks around the point in the Overworld and about 16 blocks in the Nether, taking the nearest portal it finds. If none is found, the game builds a new one. Two Overworld portals close together can therefore link to the same Nether portal, and a portal built a few blocks from the converted point can still attract the link.
Linking portals where you want them
- Note the Overworld coordinates of your portal, using the debug screen (F3 on Java) or the coordinates setting.
- Convert them with the calculator.
- Build the Nether portal at the converted point.
- Step through and check where the Overworld exit appears.
- Adjust the position if the link is not where you expected.
Test the link before you build a long tunnel, since a small rounding or search difference can send you to a different portal.
Choosing a portal location
Because the Nether is scaled 8 to 1, a Nether portal at X = 125 sits near Overworld X = 1000 to 1007. Move the Nether portal 10 blocks and the Overworld exit moves 80 blocks. That is useful for fine control, and it also explains why small mistakes in the Nether produce large offsets in the Overworld.
Worked example with a second base
Your main base is at 1000, 64, −250 and a second base is at 1400, 70, −250. Their Nether coordinates are X = 125 and X = 175, both with Z = −32. They are 50 blocks apart in the Nether, which is 400 blocks apart in the Overworld, so a 50 block tunnel along the X axis links them.
Estimating travel time
Walking 50 blocks is far quicker than walking 400, so Nether travel saves about 87.5 percent of the distance, from 1 − 1 ÷ 8. The actual time also depends on terrain, lava and the way you travel, which the calculator does not estimate.
Common mistakes
- Dividing the Y value by 8 as well. Y does not change.
- Rounding toward zero for negative values instead of rounding down.
- Building two portals close together and ending up linked to the same one.
- Forgetting that going back, each Nether block spans 8 Overworld blocks.
The ratio and search ranges described here are for Java Edition as documented by the community wiki. Other editions may differ, so test a link in your own world.
Checking the result in game
After you convert, open the debug screen on Java Edition and compare your Nether position with the converted numbers before you commit to a long tunnel. A mismatch of one block usually comes from rounding, and a mismatch of dozens of blocks usually means the X and Z values were swapped or the wrong direction was chosen in the calculator. Writing both sets of coordinates in a note beside each portal makes later trips much easier.
Frequently asked questions
How do I convert Overworld coordinates to the Nether?
Divide X and Z by 8 and round down. Leave Y as it is. For 1000, 64, −250 that gives 125, 64, −32.
Why is my Nether coordinate one block off?
Rounding. The game rounds down, so −31.25 becomes −32. If you rounded toward zero you would get −31.
Does the Y coordinate change between dimensions?
No. Y stays the same number, so check that the height is a sensible one in the Nether.
How close can two portals be before they link to the same one?
On Java Edition, Overworld portals within about 128 blocks of each other can link to the same Nether portal, because the search area is wider in the Overworld. Build them farther apart, or test each link.
