Estimate the installed cost of an above-ground or an inground swimming pool from its size or area and the type of construction.
Pool Installation Cost Calculator
Installed cost of an above-ground or inground swimming pool, from size and pool type.
Starting values: the above-ground mode with a medium pool, 18 to 21 ft round, and no extras. The calculator gives 4,000. The inground mode starts at a pool surface of 450 ft² in fiberglass, which gives 47,250.
How the calculator works
Above-ground pools
Total = base price for the size + extras
- Small, up to 15 ft round: 2,000
- Medium, 18 to 21 ft round: 4,000
- Large, 24 ft and over or oval: 7,000
The extras input is for a deck, fencing or a pad, and is 0 by default.
Inground pools
Total = pool surface area × cost per ft² + extras
- Vinyl liner: 75 per ft²
- Fiberglass: 105 per ft²
- Gunite or concrete: 140 per ft²
The extras input is for decking, fencing and equipment, and is 0 by default. All of these rates are examples, so replace them with local quotes. The area has a unit selector, and you can find the surface area with the pool square footage calculator.
Worked examples
Above-ground pools
A large pool with a 1,500 deck and fence: 7,000 + 1,500 = 8,500. A small pool with nothing extra costs 2,000.
An inground pool in three materials
A pool of 16 ft by 32 ft has a surface of 512 ft²:
- Vinyl liner: 512 × 75 = 38,400.
- Fiberglass: 512 × 105 = 53,760.
- Gunite or concrete: 512 × 140 = 71,680.
The starting example with extras
A pool of 450 ft² in fiberglass is 450 × 105 = 47,250. With 12,000 for decking, a fence and equipment, the total is 59,250.
What drives the cost of an inground pool
A pool cost guide names the main drivers:
- Size and shape. A larger pool, or a complex shape, needs more material, equipment and labour.
- Excavation. A site that is hard to reach, or has rock or poor soil, costs a lot more to dig.
- Labour and location. Labour is a large share of the total, and costs are higher in urban areas.
Choosing the construction
A vinyl liner pool can be made in almost any size or shape, but the liner usually has to be replaced about every ten years. A fiberglass shell is made in a factory, so the shapes are limited to what the maker offers and what can be moved to the site. It is durable and needs little upkeep. A concrete pool offers the most finishing options, such as tile and decorative touches, and lasts longer than vinyl, but needs more upkeep than fiberglass.
What the base price leaves out
The guide lists costs that are usually outside the base price. Put them in the extras input:
- Decking or a patio around the pool.
- A fence or an enclosure.
- Equipment, such as a filter, pump, heater and cover.
- Permits and inspections.
- Landscaping, lighting, steps and water features.
Above-ground pools
An above-ground pool needs little or no excavation, which keeps its cost low. The main extras are levelling the ground, a deck for access and the filter and pump. The shell material and the size change the price, and the calculator gives only three size bands.
Using the estimate
Treat the result as a budget for the pool. To plan the running costs, see the pool heater sizing calculator and the pool heat pump cost calculator. For the setting around it, see the landscape design cost calculator.
Planning the budget
Start with the type of pool, since that sets the range, and then the size. Run the inground mode three times, once for each construction, to see the gap. In the 512 ft² example the vinyl liner and the gunite pool differ by 33,280, which is more than the whole cost of a small above-ground pool.
Look beyond the shell
The guide shows that the shell is only part of the total. Decking, fencing, equipment, permits and landscaping can each be a large line on their own, so a budget that stops at the shell is usually too low. Use the extras input for these, and add a figure from a quote for each one.
Long-term costs
The type of pool also changes the cost over the years. A vinyl liner has to be replaced about every ten years, a fiberglass shell is described as the cheapest over the long run, and a concrete pool needs more upkeep than fiberglass. The calculator gives only the installed price, so add these costs to your own comparison.
Site and access
The cost of excavation depends on how easy it is to reach and dig the site. A tight yard, a slope, rock or poor soil raises it, and the calculator does not have an input for this. If your site is difficult, add an allowance in the extras input, and ask the contractor to price the digging separately.
Permits and rules
Pools usually need a permit and an inspection, and many places have rules for fencing. Check what applies where you live before you set the budget, and include the fees in the extras.
Frequently asked questions
How much does it cost to install a pool?
It depends on the type and size. At the example rates, a medium above-ground pool is 4,000, and a 450 ft² fiberglass inground pool is 47,250 before extras. Use local quotes for a real figure.
Which inground pool type costs the least?
In the calculator, a vinyl liner is the lowest rate, then fiberglass, then gunite or concrete. A vinyl liner usually has to be replaced about every ten years.
What is not in the base price of a pool?
Decking, fencing, equipment, permits and landscaping are usually extra. Enter them in the extras input to get a fuller total.
How do I find the pool surface area?
Multiply length by width for a rectangle. The pool square footage calculator handles other shapes.
