A heated driveway has two separate costs: the installation, which you pay once, and the electricity, which you pay every time it snows. This heated driveway cost calculator estimates both. It multiplies your driveway area by an installed cost per square foot, and it works out the running cost of one snow event from the area, the heater output in watts per square foot, the hours run and your electricity rate.
Heated Driveway Cost Calculator
Installed cost of a snow-melt heated driveway system, plus estimated running cost per snow event.
The starting values are 800 square feet at $15 per square foot, which gives $12,000 to install. A 4 hour event at 50 W per square foot and $0.15 per kWh costs $24.00.
How is heated driveway installation cost calculated?
Multiply the driveway area by the installed cost per square foot.
Installed cost = Area × Cost per sq ft
Where area is the heated surface in square feet and the cost per square foot covers the heating cable or mat plus controls. The calculator does not include the surface material, demolition or an electrical panel upgrade.
Worked example: the starting values
Installed cost = 800 × 15 = $12,000
How is the running cost per snow event calculated?
Convert the heater output to kilowatts, then multiply by the hours and the electricity rate.
Cost per event = Area × Watts per sq ft ÷ 1,000 × Hours × Rate
Worked example: the running cost
Power = 800 × 50 ÷ 1,000 = 40 kW
Cost = 40 × 4 × 0.15 = $24.00
Worked examples for different driveways
Worked examples
Long storm
Enter 800 square feet, 50 W, 9 hours and $0.15. The cost is 40 × 9 × 0.15 = $54.00 for one storm with after-run time.
How area, installed rate and hours change the costs
The first table keeps the $15 installed rate and changes the heated area.
| Area | Installed cost | Power at 50 W per sq ft | Cost of a 4 hour event |
|---|---|---|---|
| 400 sq ft | $6,000 | 20 kW | $12.00 |
| 800 sq ft | $12,000 | 40 kW | $24.00 |
| 1,200 sq ft | $18,000 | 60 kW | $36.00 |
The installed cost per square foot
Holding 800 sq ft, an installed cost of $10, $15 and $20 per sq ft gives $8,000, $12,000 and $16,000. Ask the installer what the rate includes, because the surface, the excavation and the electrical supply can be priced as separate lines.
The power rating and the hours
The running cost depends on the power density, the hours and the electricity rate. For 800 sq ft, 4 hours and $0.15 per kWh, a rating of 30, 50 and 70 W per sq ft costs $14.40, $24.00 and $33.60 per event. For 50 W per sq ft and $0.15, run times of 2, 4 and 9 hours cost $12.00, $24.00 and $54.00. For 4 hours at 50 W, an electricity rate of $0.10, $0.15 and $0.25 costs $16.00, $24.00 and $40.00.
A season of use
Multiply the cost of one event by the number of events you expect. At $24.00 an event, 10 events cost $240 and 20 events cost $480. Compare that with the installed cost to see why the installation is the larger part of the bill, and why a system that is switched on only when it snows costs far less to run than one left on all winter.
Comparing the estimate with a quote
An installer’s quote usually combines the heating element, the controls, the labour and sometimes the surface. Divide the quote by the heated area and compare it with the rate you entered. A much higher rate can be reasonable if the quote includes a new surface or an electrical upgrade, and a much lower one deserves a question about the power rating of the system. Ask also how the system is switched on, because a sensor that starts the heating only when snow is detected uses fewer hours than a manual switch left on through the storm.
Frequently asked questions
How much does a heated driveway cost to run?
At the defaults, 800 square feet at 50 W for 4 hours at $0.15 costs $24.00 per event.
How does the power rating change the running cost?
It is a direct multiplier. At 800 sq ft, 4 hours and $0.15 per kWh, 30 W per sq ft costs $14.40 and 70 W per sq ft costs $33.60 per event.
How do I estimate a full winter?
Multiply the cost of one event by the number of events. At $24.00, 10 events cost $240 and 20 events cost $480.
Does the installed cost include the electrical supply?
Not necessarily. Ask the installer what the rate includes and whether the supply is priced separately.
