Radiant Floor Heating Cost Calculator: Hydronic & Electric Systems

Radiant floor heating comes in two common forms, a hydronic system with tubes carrying warm water and an electric system with cables or mats under the floor. This radiant floor heating cost calculator has a mode for each. The hydronic mode multiplies the floor area by an installed cost per square foot. The electric mode adds the mat or cable cost, installation labour and an optional thermostat. The starting rates are placeholders, so use your own quotes.

Heating & Cooling Cost Calculators

Radiant Floor Heating Cost Calculator

Installed cost of radiant floor heating, either a generic hydronic tube/mat system or an electric Ditra-Heat-style cable system.

Example price — replace with your local quote.

How do you calculate radiant floor heating cost?

The formula depends on the mode you choose: hydronic multiplies the floor area by an installed rate per square foot, and electric adds the mat or cable cost, labour and an optional thermostat. Each mode is shown below with its worked examples.

Hydronic tube or mat system

Total = Floor area × Installed cost per ft²

Worked example with the starting values, 200 ft² at $12 per ft²:

Total = 200 × 12 = $2,400

A larger example, 350 ft² at $15 per ft²:

Total = 350 × 15 = $5,250

Electric cable or mat system

The calculator labels this mode as a Ditra-Heat-style mat, a membrane system that holds electric heating cable under tile.

Total = Floor area × Mat or cable cost per ft² + Installation labour + Thermostat

Worked example with the starting values, 100 ft² at $8 per ft², $500 labour and a $250 thermostat:

Total = 100 × 8 + 500 + 250 = $1,550

A bathroom example, 60 ft² at $10 per ft², $600 labour and a $200 thermostat:

Total = 60 × 10 + 600 + 200 = $1,400

A larger electric floor, 150 ft² at $9 per ft², $800 labour and no thermostat cost:

Total = 150 × 9 + 800 + 0 = $2,150

How the two calculator modes differ

Feature Hydronic Electric
Inputs Area, installed cost per ft² Area, mat cost per ft², labour, thermostat
Labour Built into the per-ft² rate Entered as a lump sum
Thermostat Not separate Optional lump sum

The hydronic mode uses one installed rate, so make sure your quote’s per-square-foot price covers the boiler or heat source, tubing, controls and labour. The electric mode separates the pieces, which makes it easier to compare.

Hydronic radiant heating

A hydronic system circulates warm water through tubes in or under the floor, which are connected to a boiler or other heat source and a set of controls. The scope of a quote can vary a lot, because the heat source may or may not be included. Ask your installer what is in the price.

What electric radiant heating is

An electric system warms the floor with cables or mats that run on a dedicated circuit and are controlled by a thermostat. It is often chosen for single rooms such as a bathroom. The electrical work and the thermostat are the items to check in a quote.

What the radiant floor heating cost calculator leaves out

The calculator does not include the floor covering, subfloor preparation, insulation under the system, electrical panel upgrades or running costs. It also does not size the system. Both modes give an installation cost only, so ask your installer for the heat output the system will provide.

Comparing radiant floor quotes

Ask for the area covered, the system type, what the heat source and controls are, the labour and any warranty. Divide each total by the area to compare prices per square foot, and check what is included.

Floor area and the hydronic estimate

At the $12 per ft² starting rate:

Floor area Total
100 ft² $1,200
200 ft² $2,400
300 ft² $3,600
500 ft² $6,000

Floor area and the electric estimate

At $8 per ft² for the mat, $500 labour and a $250 thermostat:

Floor area Total Per ft²
50 ft² $1,150 $23.00
100 ft² $1,550 $15.50
150 ft² $1,950 $13.00
200 ft² $2,350 $11.75

The labour and thermostat are fixed amounts, so the cost per square foot falls as the floor gets bigger. A small bathroom costs more per square foot than a large room.

Worked example: comparing the two modes for one floor

For a 100 ft² floor, hydronic at $12 per ft² gives $1,200. Electric with the starting inputs gives $1,550. These figures use placeholder rates and leave out the heat source for the hydronic system, so the gap says little until you enter real quotes. Use the calculator once for each mode with the numbers from the written quotes and compare the totals, along with what each quote includes.

New build or existing floor

Where the system goes changes the total more than the system type does.

Zones, labour and other extras

Several costs sit outside a per-square-foot rate, and quotes show them as separate lines.

Frequently asked questions

Can I leave the thermostat cost at zero?

Yes. Enter 0 in the electric mode if the thermostat is already included in your mat or labour price.

Mark Danny

Mark Danny

Mark Danny builds and maintains the free calculators and guides on Area of Irregular Shapes Calculator. Every calculator page explains its formula and shows a worked example, so you can check the working yourself. Spotted a mistake or have a suggestion? Email gulsher.hingoro101@gmail.com.

Articles: 559