Heating Oil Cost Calculator: Estimate Gallons & Seasonal Price

Heating oil cost is the gallons you burn times the price per gallon, and this heating oil cost calculator gives you the total two ways: from gallons you already used, or from an estimate built on floor area, heating degree-days and furnace efficiency (AFUE). Enter your latest delivery price and the season’s cost comes out in dollars.

Heating & Cooling Cost Calculators

Heating Oil Cost & Usage Calculator

Seasonal heating oil usage and cost, from home size, degree-days and furnace efficiency, or directly from gallons and price.

$
Example price — replace with your local quote.
The degree-day estimate is a widely used rule-of-thumb approximation, not a substitute for an actual heat-loss/fuel-usage calculation for your specific home.

How do you calculate heating oil cost with this calculator?

Multiply the gallons of oil you burn by the price per gallon. If you do not know the gallons, estimate them: floor area times heating degree-days times a heat-loss factor, divided by 138,500 BTU per gallon and by the furnace’s efficiency. The calculator has one tab for each route.

From gallons used

Total cost = Gallons used × Price per gallon

If you burned 600 gallons at $3.50 per gallon, the cost is 600 × 3.50 = $2,100. The $3.50 is an example price, so use the price on your latest invoice or quote.

Estimating gallons from your home

Gallons = (Area × Degree-days × Heat-loss factor) ÷ 138,500 ÷ (AFUE ÷ 100)
Total cost = Gallons × Price per gallon

Where:

  • Area = heated floor area in square feet
  • Degree-days = heating degree-days for the season (explained below)
  • Heat-loss factor = BTU lost per square foot per degree-day
  • 138,500 = BTU in one gallon of heating oil
  • AFUE = furnace efficiency as a percentage

Worked example

A 2,000 ft² home, 6,000 heating degree-days, a heat-loss factor of 5.9, an 85% AFUE furnace and oil at $3.50 per gallon:

Heat needed = 2,000 × 6,000 × 5.9 = 70,800,000 BTU
Gallons = 70,800,000 ÷ 138,500 ÷ 0.85 = about 601 gallons
Cost = 601 × 3.50 = about $2,105

The 6,000 degree-days and the 5.9 factor are placeholders for the example, not regional averages. The next sections show how to replace them with your own numbers.

Heating degree days explained

A heating degree day measures how cold a day was against a base temperature. The US Energy Information Administration (EIA) uses 65°F as the base: average the day’s high and low, and if the result is below 65°F, the shortfall is that day’s heating degree days. EIA’s own example has a high of 33°F and a low of 25°F, a mean of 29°F, which gives 65 − 29 = 36 heating degree days.

Add up the daily values across the heating season to get the seasonal figure the calculator asks for. Look up the total for your location from weather data rather than borrowing another region’s number.

Finding your own heat-loss factor

Work the factor backwards from a winter when you know how much oil you burned. It depends on insulation, air leaks and ductwork, which is why a generic default can be far off.

Heat-loss factor = Gallons used × 138,500 × (AFUE ÷ 100) ÷ (Area × Degree-days)

For 600 gallons used, an 85% furnace, 2,000 ft² and 6,000 degree-days:

600 × 138,500 × 0.85 ÷ (2,000 × 6,000) = 5.89

That is where the 5.9 in the worked example comes from. Once you have your own factor, the Estimate tab can show what changes if the price moves or the furnace is replaced.

How furnace efficiency changes the cost

AFUE sets how much of the fuel’s heat reaches the house, so the same heat demand burns fewer gallons in a more efficient furnace. Using the 70,800,000 BTU example at $3.50 per gallon:

AFUE Gallons Cost
80% 639 $2,236
85% 601 $2,105
90% 568 $1,988
95% 538 $1,883

These figures hold the heat demand and the price fixed, so they isolate the furnace effect only.

Where 138,500 BTU per gallon comes from

EIA’s Btu conversion table lists one gallon of heating oil as 138,500 Btu. EIA notes that its conversion factors are recalculated each year, so treat the number as a standard approximation, which is how the calculator uses it.

How the price per gallon changes the total

The total moves in step with the price. At 600 gallons, $3.00 per gallon costs $1,800, $3.50 costs $2,100 and $4.00 costs $2,400. This page does not quote a current market price, so use your latest invoice, a supplier quote or EIA’s published price series.

How accurate the heating oil cost calculator is

The degree-day method is a rule-of-thumb approximation. It does not model thermostat setbacks, occupancy or hot water use, and it relies on a heat-loss factor you supply. When you have delivery records, trust them over the estimate and use the From gallons used tab.

Heating oil prices to test your estimate against

Date Price per gallon Cost of 600 gallons
Winter 2015 to 2016 low $2.06 $1,236
Early February 2026 $3.60 $2,160
9 March 2026 $4.460 $2,676
Early November 2022 $5.902 $3,541.20

The gap between the lowest and highest price is about $2,305 on the same 600 gallons. That is about 6.5 times the $353 difference between an 80 percent and a 95 percent furnace in the efficiency table above. Check the current price with your supplier before you rely on any of these figures, because they are dated.

Checking the estimate against your deliveries

The degree-day estimate is only as good as the heat-loss factor, so test it against invoices once you have a season of them. There is no single average for gallons used per household, so your own records are the better check.

Comparing estimate and invoices

Say the worked example estimates 601 gallons, but your invoices total 640. That is 640 − 601 = 39 gallons, or 39 ÷ 601 = 6.5 percent more than the estimate.

Recalculating the heat-loss factor

Put the 640 gallons into the factor formula: 640 × 138,500 × 0.85 ÷ (2,000 × 6,000) = 75,344,000 ÷ 12,000,000 = 6.28. Enter 6.28 in place of 5.9, and the estimate now matches what you burned.

Frequently asked questions

Should I estimate for the whole season or month by month?

The calculator uses a seasonal degree-day total. For a month, enter that month’s degree-days instead of the season’s.

Does furnace efficiency make a big difference?

Yes. In the example above, moving from 80% to 95% AFUE cuts the gallons from 639 to 538 for the same heat demand, though the price per gallon can move the total by more.

What heat-loss factor should I enter?

Use the value you calculate from your own usage history. The 5.9 in this page’s example comes from one set of example numbers and is not a typical value.

Can I lock in a heating oil price?

Ask your supplier whether it offers fixed-price or price-cap programs. The calculator itself uses whatever price you enter.

Is a degree-day estimate better than my delivery history?

No. Delivery history reflects how your home actually performs, so use it when you have it, and use it to recalculate the heat-loss factor.

Mark Danny

Mark Danny

Mark Danny builds and maintains the free calculators and guides on Area of Irregular Shapes Calculator. Every calculator page explains its formula and shows a worked example, so you can check the working yourself. Spotted a mistake or have a suggestion? Email gulsher.hingoro101@gmail.com.

Articles: 559