Tile installation cost is the tile you buy, including waste, plus the labour and any subfloor prep to put it down, and this tile installation cost calculator adds them for any floor or wall. Enter the area, the tile price per square foot, the labour rate, optional prep and a waste allowance. Waste applies to the tile only, because labour and prep are charged on the area you actually cover.
Tile Installation Cost Calculator
Installed cost of floor or wall tile — general-purpose, any room — from area, tile price and installation rate, with waste.
How do you calculate tile installation cost?
Multiply the area by one plus the waste percentage and by the tile price, then add labour and prep on the unadjusted area.
Total = Area × (1 + Waste ÷ 100) × Tile price + Area × (Labour + Prep)
Where:
- Area = square feet to be tiled
- Waste = allowance for cuts and breakage, as a percentage
- Tile price, Labour and Prep = dollars per square foot
Worked examples
Worked example: a 200 ft² area
$6 per ft² tile, $7 per ft² labour, no prep and 10% waste:
Tile = 200 × 1.10 × 6 = $1,320
Labour = 200 × 7 = $1,400
Total = $2,720
Worked example: a floor with subfloor prep
A 12 ft by 15 ft floor is 180 ft². Tile at $4.50 per ft², labour $8, backer board prep $2 and 12% waste:
Tile = 180 × 1.12 × 4.50 = $907.20
Labour and prep = 180 × (8 + 2) = $1,800
Total = $2,707.20
Worked example: a wall
A 30 ft² wall with tile at $12 per ft², labour $15 and 15% waste:
Tile = 30 × 1.15 × 12 = $414
Labour = 30 × 15 = $450
Total = $864
Waste allowance and tile cost compared
Waste only affects the tile line. For the 200 ft² example at $6 per ft²:
| Waste | Tile cost |
|---|---|
| 5% | $1,260 |
| 10% | $1,320 |
| 15% | $1,380 |
| 20% | $1,440 |
The right allowance depends on the tile layout, room shape, tile size, pattern and the number of cuts. A simple layout with large tiles usually needs less than an intricate pattern or small mosaic. Ask your installer, or check the tile maker’s guidance.
Counting boxes of tile
Divide the adjusted area by the coverage on one box, then round up. Check the coverage printed on the box, since it varies by product.
Boxes = (Area × (1 + Waste ÷ 100)) ÷ Coverage per box, rounded up
For 200 ft² with 10% waste and an example box coverage of 12.5 ft²: 220 ÷ 12.5 = 17.6, so order 18 boxes.
When subfloor prep is needed
Prep covers work such as backer board or levelling before tile goes down. Whether your floor needs it depends on the subfloor, so ask your installer. In the calculator, enter it as a price per square foot and it is added on the unadjusted area along with labour.
What the tile installation cost calculator leaves out
It does not add grout, thinset, sealant or trim unless you build them into the tile or labour figures. Removing old flooring, moving fixtures and disposal can also be billed separately, so check what your quote includes. For a bathroom, the dedicated bathroom tile installation cost calculator reflects that room’s typical scope.
Buying extra tile
Keeping a few spare tiles for future repairs is a sensible precaution, since matching a discontinued tile later can be difficult. The calculator does not add this, so add it to your order if you want it.
Area and total cost compared
With tile at $6 per ft², labour at $7 per ft², no prep and 10% waste:
| Area | Tile | Labour | Total |
|---|---|---|---|
| 100 ft² | $660 | $700 | $1,360 |
| 200 ft² | $1,320 | $1,400 | $2,720 |
| 300 ft² | $1,980 | $2,100 | $4,080 |
| 500 ft² | $3,300 | $3,500 | $6,800 |
In the 200 ft² example the tile is $1,320 of the $2,720, or 48.5 percent, and labour is the other 51.5 percent.
Worked example: counting boxes for a floor
A 180 ft² floor with 12% waste and an example coverage of 15 ft² per box:
Adjusted area = 180 × 1.12 = 201.6 ft²
Boxes = 201.6 ÷ 15 = 13.44, so order 14 boxes
Pricing a floor and a wall in the same room
The calculator uses one set of rates, so run it once for each surface and add the totals. A shower room might have 40 ft² of floor tile and 90 ft² of wall tile.
Floor: 40 × 1.15 × 8 + 40 × 14 = 368 + 560 = $928
Wall: 90 × 1.15 × 10 + 90 × 15 = 1,035 + 1,350 = $2,385
Total = 928 + 2,385 = $3,313
These rates and the 15% waste are example figures. Use the rates from your quote for each surface.
Removal, prep and waste
These items are the usual reason a tile quote differs from a first estimate.
Frequently asked questions
How do I count the boxes of tile?
Divide the area including waste by the coverage on one box and round up. 220 ft² at 12.5 ft² a box is 18 boxes.
How do I price a floor and a wall in one room?
Run the calculator once for each surface and add the totals, because the tile price, labour rate and waste differ between them.
