Hardwood Floor Refinishing Cost Calculator: Sand, Recoat or Restain

Refinishing existing hardwood is priced per square foot, and the rate depends on how much work the floor needs. This hardwood floor refinishing cost calculator multiplies your floor area by a rate for the finish level you choose: screen and recoat, full sand and refinish, or full refinish with a stain or color change. You can also type your own rate.

Flooring Cost Calculators

Hardwood Floor Refinishing Cost Calculator

Cost to sand and refinish existing hardwood floors, from floor area and a per-square-foot refinishing rate.

0 = use the typical rate for the selected level.

The starting values are 800 square feet at the full sand and refinish rate of $4 per square foot, which gives $3,200.

How is hardwood floor refinishing cost calculated?

Multiply the floor area by the rate per square foot for the finish level.

Total = Area × Rate per sq ft

Where area is the floor area in square feet and the rate is $2 for a screen and recoat, $4 for a full sand and refinish and $5 for a full refinish with a stain or color change. If you enter a custom rate above zero, it replaces the level’s rate.

Worked example: the starting values

Total = 800 × 4 = $3,200

The same 800 square feet costs 800 × 2 = $1,600 for a screen and recoat and 800 × 5 = $4,000 with a color change.

Worked examples for different floors

Worked examples

Screen and recoat a larger floor

Enter 1,200 square feet at level 1. The total is 1,200 × 2 = $2,400.

Stain change on a mid-size floor

Enter 1,000 square feet at level 3. The total is 1,000 × 5 = $5,000.

How area and finish level change the cost

The table shows four floor sizes at each of the calculator’s three finish levels.

Floor area Screen and recoat ($2) Full sand ($4) Sand and restain ($5)
600 sq ft $1,200 $2,400 $3,000
800 sq ft $1,600 $3,200 $4,000
1,200 sq ft $2,400 $4,800 $6,000
1,500 sq ft $3,000 $6,000 $7,500

Which level suits which floor

A screen and recoat refreshes a worn finish without removing wood, so it only suits a floor whose finish is dull but whose surface is sound. A full sand and refinish removes the old finish and a thin layer of wood to reach bare timber, which is needed when the finish is badly worn, deeply scratched or stained. A colour change needs the full sand, so it takes the top level. A flooring contractor can inspect the floor and tell you which one it needs.

Using your own rate

Enter any rate above zero to override the level. At 800 sq ft, a custom rate of $3, $6 and $8 gives $2,400, $4,800 and $6,400. This is the way to use a written quote, since contractors often quote a flat figure per square foot that does not match one of the three levels.

What the rate may not include

Check whether the rate includes moving furniture, repairs to boards, stairs, edging around the room and the number of coats. Stairs and closets are often priced separately, and a floor with a lot of repair work can cost more than the rate suggests. Enter the area of the floor to be finished, and keep the extras as separate lines in your own budget.

Preparing the floor

The condition of the floor before the work starts affects the result as much as the finish level. Remove the furniture, fix loose boards and set protruding nails below the surface. Ask the contractor how long each coat needs to dry and how soon you can walk on the floor and replace the furniture, because the schedule changes the cost of the days you cannot use the room.

Frequently asked questions

How much does an 800 square foot floor cost to refinish?

At the calculator’s $4 default it is $3,200. At $2 it is $1,600 and at $8 it is $6,400.

Can I use my own rate?

Yes. Enter any rate above zero and it overrides the finish level.

Which finish level do I need?

A screen and recoat suits a sound floor with a worn finish. A full sand removes the old finish and some wood, and a colour change needs the full sand plus a new stain.

How much does a bigger floor add?

The total scales with the area. At the full sand rate of $4, 600 sq ft costs $2,400 and 1,500 sq ft costs $6,000.

Are stairs included in the rate?

Not necessarily. Ask the contractor, and add stairs as a separate line if they are quoted separately.

Mark Danny

Mark Danny

Mark Danny builds and maintains the free calculators and guides on Area of Irregular Shapes Calculator. Every calculator page explains its formula and shows a worked example, so you can check the working yourself. Spotted a mistake or have a suggestion? Email gulsher.hingoro101@gmail.com.

Articles: 559