Vinyl Flooring Cost Calculator: Sheet, LVT & LVP

Vinyl flooring cost depends on the type you choose, the extra material you buy for cuts and who installs it. This vinyl flooring cost calculator prices sheet vinyl, LVT (luxury vinyl tile) and LVP (luxury vinyl plank) from the floor area, a built-in material price for each type, an installation rate and a waste allowance.

Flooring Cost Calculators

Vinyl Flooring Cost Calculator

Installed cost of sheet, LVP or LVT vinyl flooring, from floor area, material price and installation.

Example price — replace with your local quote.
%

The starting values are 400 sq ft of LVP at $4.50 per sq ft, $2 per sq ft labour and 10% waste, which gives $2,780.

How is vinyl flooring cost calculated?

The calculator buys extra material to cover waste, but it charges labour on the floor area only.

Total = Area × (1 + Waste) × Material price + Area × Labour rate

Where the built-in material prices are $2 per sq ft for sheet vinyl, $4 for LVT and $4.50 for LVP. Labour and waste are fields you set.

Worked example: the starting values

Material = 400 × 1.10 × 4.50 = $1,980
Labour = 400 × 2 = $800
Total = 1,980 + 800 = $2,780

That is $6.95 per sq ft of floor.

Worked examples for each vinyl type

Worked examples

Sheet vinyl

Choose sheet vinyl at 400 sq ft with $2 labour. Material is 400 × 1.10 × 2 = $880, labour is $800, and the total is $1,680, or $4.20 per sq ft.

LVT

Choose LVT with the same area and labour. Material is 440 × 4 = $1,760, so the total is 1,760 + 800 = $2,560, or $6.40 per sq ft.

LVP with a plank labour rate

Choose LVP and set labour to $5. The total is $3,980. That is $1,200 more than the starting $2,780, and it shows how much of the result depends on the labour quote.

How area, waste and labour change the total

The first table keeps the LVP price of $4.50, $2 labour and 10% waste and changes the area.

Area Material Labour Total
200 sq ft $990 $400 $1,390
400 sq ft $1,980 $800 $2,780
600 sq ft $2,970 $1,200 $4,170

The waste allowance

Waste applies to the material only. On 400 sq ft of LVP with $2 labour, 5%, 10% and 15% waste give totals of $2,690, $2,780 and $2,870. Each 5% adds $90 here, so the choice of allowance changes the result by little, while a shortfall in the order can cost a second delivery and a mismatch in the batch.

Types compared

At 400 sq ft with $2 labour and 10% waste, sheet vinyl is $1,680, or $4.20 per sq ft, LVT is $2,560, or $6.40, and LVP is $2,780, or $6.95. The sheet is cheapest because the built-in material price is lowest, and sheet vinyl also needs fewer seams in a small room.

The labour rate

For LVP, a labour rate of $1, $2, $3 and $5 per sq ft gives $2,380, $2,780, $3,180 and $3,980. Labour can vary between installers and between a simple room and one with many cuts, so use the figure from a written quote when you have one.

Boxes and rolls

Tile and plank are sold by the box and sheet vinyl by the roll width, so the order is rounded up in practice. Check the coverage printed on the box and divide your area with waste by it, then round up. Buy from a single batch where you can, because colour can vary slightly between production runs.

Preparing for the order

Measure each room and add the areas before applying the waste allowance. Allow a little more for diagonal layouts and for rooms with many corners.

Frequently asked questions

Does waste apply to the labour cost?

Not here. Labour is charged on the floor area, so the starting labour is $800. Charging it on the waste area too would give $2,860.

What is not included in the total?

Removal of the old floor, underlayment, subfloor repair, trim, delivery and tax.

How much does the waste allowance change the vinyl cost?

Only the material line. On 400 sq ft of LVP, each 5% adds $90 to the total.

Which vinyl type is cheapest in the calculator?

Sheet vinyl. At 400 sq ft with $2 labour it costs $1,680, against $2,560 for LVT and $2,780 for LVP.

How do I turn the area into boxes?

Divide the area with waste by the coverage printed on the box, then round up to whole boxes.

Mark Danny

Mark Danny

Mark Danny builds and maintains the free calculators and guides on Area of Irregular Shapes Calculator. Every calculator page explains its formula and shows a worked example, so you can check the working yourself. Spotted a mistake or have a suggestion? Email gulsher.hingoro101@gmail.com.

Articles: 559