Pool Heat Pump Cost Calculator: Installation & Running Cost

A pool heat pump has two costs: what you pay to buy and install it, and what it costs to run. This pool heat pump cost calculator has a mode for each. The installation mode multiplies the heat pump’s output in BTU per hour by an installed price per 1,000 BTU/h. The running mode multiplies its power draw in kilowatts by the hours it runs, your electricity rate and the days in the season. It starts with a 120,000 BTU/h unit at $100 per 1,000 BTU/h, and a 5 kW draw for 8 hours a day at $0.15 per kWh over 90 days. These are placeholders for your own quotes and bills.

Heating & Cooling Cost Calculators

Pool Heat Pump Cost Calculator

Installed cost and estimated running cost of a pool heat pump, from unit size, install cost and hours of operation.

$
Example price — replace with your local quote.

How do you calculate pool heat pump installation cost?

Divide the output in BTU per hour by 1,000, then multiply by the installed price per 1,000 BTU/h.

Installed cost = (Output in BTU/h ÷ 1,000) × Price per 1,000 BTU/h

Worked examples

Worked example: the starting values

Installed cost = (120,000 ÷ 1,000) × 100 = 120 × 100 = $12,000

Worked example: a size from the sizing calculator

The swimming pool heat pump sizing calculator on this site gives 33,750 BTU/h for a 450 ft² pool with a 15°F rise and no cover. At $100 per 1,000 BTU/h:

Installed cost = (33,750 ÷ 1,000) × 100 = 33.75 × 100 = $3,375

Worked example: other sizes and prices

60,000 BTU/h at $85 per 1,000: 60 × 85 = $5,100
140,000 BTU/h at $120 per 1,000: 140 × 120 = $16,800

Size the heat pump first, then price it. The output you need depends on your pool, not on the calculator’s starting figure.

How do you calculate pool heat pump running cost?

Multiply the power draw by the hours and the electricity rate for the daily cost, then by the days in the season.

Cost per day = Power draw (kW) × Hours per day × Rate per kWh
Cost per season = Cost per day × Days per season

Worked examples

Worked example: the starting values

Per day = 5 × 8 × 0.15 = $6.00
Per season = 6.00 × 90 = $540

Worked example: a smaller unit, a longer season

A 3.5 kW unit running 6 hours a day at $0.18 per kWh for 120 days:

Per day = 3.5 × 6 × 0.18 = $3.78
Per season = 3.78 × 120 = $453.60

Worked example: a larger unit, a shorter season

A 7 kW unit running 10 hours a day at $0.12 per kWh for 60 days:

Per day = 7 × 10 × 0.12 = $8.40
Per season = 8.40 × 60 = $504

Hours, electricity rate and running cost compared

For a 5 kW heat pump at $0.15 per kWh over 90 days:

Hours per day Cost per day Cost per season
4 hours $3.00 $270
8 hours $6.00 $540
12 hours $9.00 $810

For the same unit running 8 hours a day over 90 days, the rate matters too:

Rate per kWh Cost per day Cost per season
$0.10 $4.00 $360
$0.15 $6.00 $540
$0.20 $8.00 $720
$0.25 $10.00 $900

Total cost in the first season

The calculator treats installation and running as two separate modes, so add them yourself. For the starting values, $12,000 to install plus $540 to run is $12,540 in the first season. In later seasons you pay the running cost again, which is why a more efficient unit can cost less over several years even if it is dearer to buy.

What the pool heat pump cost calculator leaves out

The installation mode multiplies output by one price. It does not add electrical work, plumbing connections, a pad or mounting, permits or delivery unless your price per 1,000 BTU/h includes them. The running mode takes the power draw you enter and does not work out how many hours you actually need. Ask the supplier for the unit’s electrical rating and an installed price.

Comparing quotes

Ask each supplier for the heat output, the electrical draw, what the installed price covers and the warranty. Divide each installed price by its output in thousands of BTU/h to compare on one basis, then use the running mode to compare the electricity cost.

Worked example: a first-season total for a smaller pool

Take the 33,750 BTU/h pump from the sizing example. Suppose it draws 3 kW, runs 8 hours a day at $0.15 per kWh for 90 days. The 3 kW is a made-up figure, so use the one on your unit’s label:

Installed = 33.75 × 100 = $3,375
Running = 3 × 8 × 0.15 × 90 = $324
First season = 3,375 + 324 = $3,699

Labour, electrical work and lifespan

Several costs sit outside the calculator, so ask each installer to itemise them.

Frequently asked questions

Does the running cost include the pump and filter?

No. It covers only the heat pump power draw you enter in kilowatts, so check the unit label for the figure.

Why are there two modes?

Installation is a one-time price based on output and running cost is a seasonal electricity bill. Add the two for a first-season total.

Mark Danny

Mark Danny

Mark Danny builds and maintains the free calculators and guides on Area of Irregular Shapes Calculator. Every calculator page explains its formula and shows a worked example, so you can check the working yourself. Spotted a mistake or have a suggestion? Email gulsher.hingoro101@gmail.com.

Articles: 559