Landscape projects are often priced per square foot, and the rate depends on how much of the job a professional does. This landscape design cost calculator multiplies your yard or project area by a built-in rate for one of three scopes: design only, design with a basic installation, or a full design-build. It starts with a 3,000 ft² area and the middle scope. The rates are fixed placeholders, so if a designer gives you a real price per square foot, multiply it by your area as shown below.
Landscape Design Cost Calculator
Cost of professional landscape design and installation, from yard size and project scope.
How do you calculate landscape design cost?
Multiply the area in square feet by the rate for the scope you choose. The area is the part of the yard the design covers, and the rate depends on how much of the job the company does.
Total = Area (ft²) × Cost per ft² for the scope
The calculator uses these fixed rates, and you cannot edit them:
| Scope | Rate per ft² |
|---|---|
| Design only | $1 |
| Design with basic installation | $7 |
| Full design-build | $20 |
The calculator’s own note describes wider ranges for each scope, roughly $0.50 to $1.50 for design only, $5 to $10 for design with basic installation and $15 to $30 or more for a full design-build. The rates above sit inside those ranges, but they are placeholders and not a price list.
Worked examples
Worked example: the starting values
A 3,000 ft² area, design with basic installation:
Total = 3,000 × 7 = $21,000
Worked example: design only
The same area with design only:
Total = 3,000 × 1 = $3,000
Worked example: a full design-build
The same area with a full design-build:
Total = 3,000 × 20 = $60,000
Area and cost for each scope compared
| Area | Design only | Design and basic install | Full design-build |
|---|---|---|---|
| 1,000 ft² | $1,000 | $7,000 | $20,000 |
| 3,000 ft² | $3,000 | $21,000 | $60,000 |
| 5,000 ft² | $5,000 | $35,000 | $100,000 |
How do you use a designer’s quote?
The rate is set by the scope, so apply your quoted rate yourself. For a 3,000 ft² area quoted at $9 per ft²:
Total = 3,000 × 9 = $27,000
Use the calculator for the area side of the job, then apply your quoted rate.
Worked example: an area in square metres
The area box accepts other units. A 250 m² garden is 250 × 10.7639 = 2,691 ft². At the design with basic installation rate:
Total = 2,691 × 7 = about $18,837
Measuring the project area
Measure only the part of the yard that the design covers. Multiply the length by the width for each rectangular section and add them up. For curved beds, split the shape into rectangles and triangles. A smaller project area costs less than the whole lot, so leave out the house, the driveway and any part you will not change.
What the three scopes mean
Design only
A plan for the yard, without the work of building it. You or another contractor carry out the work.
Design with basic installation
A plan plus a basic installation. What counts as basic depends on the company, so ask what plants, materials and hard surfaces are in the price.
Full design-build
One company designs and builds the whole project, which can include structures, paving, lighting and irrigation. Ask for a list of what is included.
What the landscape design cost calculator leaves out
It multiplies area by one rate. It does not add site preparation, soil work, permits, large features such as pools or retaining walls, long-term maintenance or the cost of plants that need replacing. Ask each company what its rate includes and how it measures the area.
Design-build compared with design plus a separate installer
Compare the two routes with the same area. A designer produces a plan, then another contractor builds it.
Worked example: design only plus a separate installer
For 3,000 ft², the design-only rate is $1 per ft². A contractor quotes $6 per ft² to install the plan:
Design = 3,000 × 1 = $3,000
Install = 3,000 × 6 = $18,000
Total = $21,000
That equals the $21,000 the calculator gives for design with basic installation, so the two routes cost the same in this example. Real quotes will differ, and coordinating two companies is more work for you.
Preparing for a designer visit
- Measure the area you want to change and sketch it.
- List what you want, such as lawn, beds, paving or lighting.
- Set a budget range and decide how much work you will do yourself.
- Ask each designer for a written quote that states the scope and the rate per square foot.
Entering each quote’s rate and your area into the calculator, as shown above, makes the quotes easy to compare.
How landscape designers charge
Designers do not always quote by square foot, so convert their pricing before you use the calculator.
Frequently asked questions
Can I change the rates?
No. The three rates are fixed placeholders. To use a quoted rate, multiply it by your area, for example 3,000 × 9 = $27,000.
What is the difference between design only and design-build?
Design only is the plan, and design-build is one company planning and building the project. Ask each company what its rate includes.
