Stump work is usually priced per inch of stump diameter with a minimum charge, and this stump removal cost calculator applies both. Enter the stump diameter, the number of stumps, the rate per inch and the minimum job charge, and it returns the estimated total for grinding or removal.
Stump Removal Cost Calculator
Stump grinding or removal cost from stump diameter and number of stumps, at a per-inch rate.
The starting values are one 18 in stump at $3 per inch with a $100 minimum. They are placeholders, so replace them with the rates from your own quotes.
How do you calculate stump removal cost?
Multiply the diameter by the rate, but never go below the minimum charge, then multiply by the number of stumps.
Total = Larger of (Minimum charge, Diameter in inches × Rate per inch) × Number of stumps
Where the diameter is measured across the widest part of the stump, usually at ground level.
Worked example: the starting values
Diameter cost = 18 × 3 = $54
Minimum charge = $100
Total = larger of 54 and 100 = $100
The $54 is below the minimum, so the minimum is the price. The minimum stops applying once the diameter times the rate passes $100, which is at 100 ÷ 3 = 33.3 in at $3 per inch.
Grinding, removal and the roots
Grinding and removal are different jobs, and the calculator’s per-inch rate fits both only if you enter the quote for the one you want.
How diameter, rate and the number of stumps change the cost
The table keeps the $3 rate and the $100 minimum and changes the diameter.
| Diameter | Diameter cost | Price charged |
|---|---|---|
| 12 in | $36 | $100 (minimum) |
| 24 in | $72 | $100 (minimum) |
| 36 in | $108 | $108 |
| 48 in | $144 | $144 |
| 60 in | $180 | $180 |
Every stump up to 33.3 in costs the same $100, so a crew may offer a better price per stump when several are done in the same visit.
The rate per inch
For an 18 in stump, a rate of $2, $4 and $6 per inch gives $36, $72 and $108 before the minimum, so the prices charged are $100, $100 and $108. The minimum stops applying at 100 ÷ rate inches, which is 50 in at $2, 25 in at $4 and 16.7 in at $6.
More than one stump
The calculator applies the larger of the minimum and the diameter cost to each stump and multiplies by the number. Three stumps of 18 in cost 3 × $100 = $300. If the stumps differ, run the calculator for each size. A job with stumps of 18, 30 and 40 in costs $100 + $100 + $120 = $320, because the 40 in stump is the only one above the minimum at $3 per inch.
Measuring the stump
Measure across the widest part of the stump at ground level. If the stump is oval, use the longer width. If it has surface roots, ask the crew whether the diameter includes them, since a wide root flare can double the work. Mark any stumps that are close to a wall, a fence or an underground line, because the crew may need to work differently around them.
What the price may not include
Check whether the quote includes the removal of the wood chips, filling the hole, and the cost of reaching a stump that a grinder cannot get to easily. Some crews leave the chips in the hole, which you can use as mulch, while others charge to haul them away.
Frequently asked questions
How is stump grinding priced?
Usually per inch of diameter at the widest point, with a minimum charge of about $100. The calculator takes the larger of the two.
Why is there a minimum charge?
Every job needs travel and setup, so a small stump still costs about $100. The calculator shows this as $100 up to 33.3 in at $3 per inch.
Is it cheaper to grind a stump myself?
Only for several large stumps. A grinder rental runs $178 to $364 a day, and the job can take one to three days.
At what diameter does the minimum charge stop applying?
When the diameter times the rate exceeds the minimum. At $3 per inch and a $100 minimum that is 33.3 in, and at $4 per inch it is 25 in.
How do I price several stumps?
Apply the larger of the minimum and the diameter cost to each stump and add the results. Stumps of 18, 30 and 40 in cost $100, $100 and $120.
Which diameter do I measure?
The widest part at ground level, using the longer width if the stump is oval. Ask the crew whether surface roots count.
