Deck Cost Calculator: Pressure-Treated, Cedar & Composite

Estimate the cost of building a deck from its area, the decking material and the length of railing. The result is a budget figure you can replace with a local quote.

Landscaping & Outdoor Calculators

Deck Cost Calculator

Deck construction cost from square footage, decking material and railing length.

$

Starting values: a deck of 300 ft² in pressure-treated wood with 40 ft of railing at 45 per linear foot. The calculator gives 9,300.

How the calculator works

Total = area × cost per ft² + railing length × railing cost per linear foot

The cost per square foot is set by the material you choose:

  • Pressure-treated wood: 25 per ft²
  • Cedar: 35 per ft²
  • Composite: 45 per ft²

These are example rates, so replace them with a local quote. The railing cost per linear foot is an input, with a starting value of 45, and the railing length can be 0 for a deck without rails. Area and length have unit selectors, so you can enter square metres and metres.

Worked examples

The same deck in three materials

A deck of 300 ft² with 40 ft of railing at 45 per foot has railing cost of 1,800.

  • Pressure-treated wood: 300 × 25 = 7,500, plus 1,800 is 9,300.
  • Cedar: 300 × 35 = 10,500, plus 1,800 is 12,300.
  • Composite: 300 × 45 = 13,500, plus 1,800 is 15,300.

A small composite deck

A deck of 12 ft by 16 ft is 192 ft², with 28 ft of railing. In composite: 192 × 45 = 8,640, and 28 × 45 = 1,260, so the total is 9,900.

A deck with no railing

A deck of 14 ft by 20 ft is 280 ft². In pressure-treated wood with the railing set to 0: 280 × 25 = 7,000. A deck close to the ground often needs no railing, but check the local rules for the height at which a railing is required.

What drives deck cost

A deck cost guide points to the same factors, and notes that labour and materials are often split about evenly:

  • Decking material. Pressure-treated wood has the lowest upfront cost but needs regular sealing. Cedar and redwood cost more and need upkeep. Composite costs more upfront but needs less maintenance. PVC is the most expensive non-wood option, and hardwoods such as ipe last for decades but are heavy and harder to install.
  • Railing. Wood is usually the cheapest, then vinyl. Steel, aluminium and composite cost more, and cable, glass and similar railings cost the most.
  • Height. A tall deck needs longer posts, more structure and often extra safety features.
  • Shape. A simple rectangle is cheaper than curves, wraparounds or several levels.
  • Stairs. A few steps add little, while long or complex stairs with landings add a lot.
  • Footings and soil. Poor soil can need extra work, and a hot tub needs larger footings.

What the estimate does not include

The calculator covers the deck area and the railing. The guide treats these as separate costs:

  • Permits and inspection fees.
  • Site preparation, such as grading, tree removal and drainage.
  • Removal and disposal of an old deck.
  • Lighting, built-in benches, privacy screens, hot tubs, outdoor kitchens and roofs.
  • Surprises such as hidden water damage where a ledger board is fixed to the house.

Adjusting the result

For a deck with stairs, a high structure or extras, add those costs to the total by hand, or raise the cost per square foot to a figure from a quote. Compare quotes on the same basis, with the same material, railing and stairs, so that the price per square foot is a fair comparison. For a finish, see the deck paint calculator. For the frame, see the deck joist spacing calculator. For an irregular outline, see the irregular deck and patio area calculator.

Planning the budget

Start with the material and the size of the deck, since those two choices set most of the total. Run the calculator with each material to see the range. In the starting example the three materials differ by 6,000 between the lowest and the highest, so the choice of decking is worth some thought before the size.

Look at upkeep as well as price

Upfront cost is only part of the picture. The cost guide notes that pressure-treated wood needs regular sealing, that cedar needs upkeep, and that composite needs less maintenance. A material that costs more now may cost less to keep over the years, so weigh both, and use the calculator for the first part only.

Getting quotes you can compare

Ask each builder for a quote with the same area, material, railing and stairs, and ask what is included. The guide says labour and materials are often close to half each, and that urban contractors tend to charge more than rural ones. Ask for the permit, the footings and the removal of any old deck to be itemised, so you can see where two quotes differ.

Doing part of the work yourself

If you build the deck yourself, the labour share drops out of the cost, but the materials, tools, permits and your time remain. Use a lower cost per square foot in the calculator in that case, based on your material prices.

Frequently asked questions

How do I estimate the cost of a deck?

Multiply the deck area by the cost per square foot for the material, then add the railing length times the cost per linear foot. A 300 ft² pressure-treated deck with 40 ft of railing comes to 9,300 at the example rates.

Which decking material costs the least?

Pressure-treated wood has the lowest upfront cost, but it needs regular sealing. Composite costs more upfront and needs less maintenance.

Does the estimate include permits and stairs?

No. Permits, site preparation, stairs, lighting and other extras are not included, so add them to the total.

Why does the same size of deck cost so differently?

Material, railing, height, shape, stairs, footings, local labour rates and the site all change the price. Use the calculator for a budget and get local quotes.

Mark Danny

Mark Danny

Mark Danny builds and maintains the free calculators and guides on Area of Irregular Shapes Calculator. Every calculator page explains its formula and shows a worked example, so you can check the working yourself. Spotted a mistake or have a suggestion? Email gulsher.hingoro101@gmail.com.

Articles: 559