Natural Gas Cost Calculator: Therms or CCF

A gas bill is a usage charge plus a fixed charge, and the usage is measured in therms or in CCF. Enter your usage and your utility’s rate, and this calculator estimates the monthly bill from therms or from CCF.

Plumbing & Utilities Calculators

Natural Gas Cost Calculator

Monthly natural gas cost from usage in therms (or CCF) and your utility rate.

therms
$
Example price — replace with your local quote.
$
1 CCF (100 ft³) of natural gas ≈ 1.037 therms — check your utility bill for the exact factor used in your area.

Starting values: the therms mode opens with 80 therms, a rate of 1.20 per therm and a 15 base charge, giving 111.00. The CCF mode opens with 75 CCF, 1.037 therms per CCF, the same rate and base charge, giving 108.33. The rate and base charge are example figures, so replace them with the numbers from your own bill.

Therms, CCF and how they relate

Natural gas is measured by volume at the meter and billed by energy. A CCF is 100 cubic feet of gas. A therm is a unit of heat equal to 100,000 Btu. The two are linked by the heat content of the gas.

The U.S. Energy Information Administration reports that gas delivered to end users averaged about 1,037 Btu per cubic foot in 2025, which makes 1 CCF about 103,700 Btu, or 1.037 therms. That is the calculator’s default conversion. Heat content varies by location, consumer type and over time, so your utility may use a slightly different factor, which is usually shown on the bill.

The formulas

From therms: Bill = Usage × Rate per therm + Base charge

From CCF: Bill = Usage × Therms per CCF × Rate per therm + Base charge

Where:

  • Usage = your gas used in the billing period
  • Rate per therm = the price of one therm of gas
  • Therms per CCF = the conversion factor, 1.037 by default
  • Base charge = the fixed monthly delivery or customer charge, or 0

Worked examples

Example 1: the therms default

80 × 1.20 = 96.00, plus the 15 base charge, gives 111.00. Dividing the bill by usage, 111.00 ÷ 80 = 1.39, is the all-in cost per therm.

Example 2: the CCF default

75 CCF × 1.037 = 77.775 therms. 77.775 × 1.20 = 93.33, plus 15, gives 108.33.

Example 3: a cold month

Heating usage can double the bill. At 150 therms and a rate of 1.35, 150 × 1.35 = 202.50, plus the 15 base charge, gives 217.50.

Example 4: why the conversion factor matters

Another gas guide gives a CCF as 102,800 Btu, a factor of 1.028. For 75 CCF that is 77.1 therms against 77.775, a difference of 0.675 therms, or about 0.81 at 1.20 per therm. The difference is small on one bill but shows why it is worth using the factor printed on yours.

Example 5: what an appliance costs to run

A gas appliance rated at 100,000 Btu an hour burns one therm an hour. At 1.20 per therm that is 1.20 an hour at full output, before any allowance for efficiency. To convert, divide the appliance’s Btu rating by 100,000 to get therms per hour.

Reading your own bill

  • Find whether usage is shown in therms or CCF, and use the matching mode.
  • Look for a thermal or Btu factor, which converts CCF to therms.
  • Separate the supply charge (the gas) from the delivery charge. If they are listed as separate rates, add them to get the rate per therm, and put any fixed monthly charge in the base box.
  • Look for tiered pricing, which charges a higher rate above set usage levels, and for price adjustments, where a utility bills on a predicted price and corrects it later through a credit or an extra charge.

What the calculator does not do

  • It uses a single rate, so it does not model tiered pricing or separate supply and delivery rates.
  • It does not add taxes or surcharges beyond the base charge you enter.
  • It estimates a bill from usage you already know. It does not predict usage from your home or weather.

To compare with another fuel, try the propane heating cost calculator, and for electricity the electric bill per square foot calculator.

Estimating from your own bills

The best input for usage is your own history. Find the same month on last year’s bill, since heating demand follows the season, and enter that usage with the current rate. For a rough yearly figure, add up twelve months of therms and multiply by the average rate, then add twelve base charges: for instance, 700 therms at 1.20 is 840, plus 12 × 15 = 180, gives 1,020 for the year.

Cutting the bill

The bill is rate times usage, so the lever you control is usage. Lowering the thermostat, sealing drafts and servicing the furnace reduce therms, while the base charge stays the same. If your usage drops from 80 to 70 therms at 1.20, the bill falls by 10 × 1.20 = 12.00, from 111.00 to 99.00.

Comparing gas with other fuels

To compare with electricity or propane, put each fuel on the same footing, such as cost per 100,000 Btu. For gas that is the rate per therm, since a therm is 100,000 Btu. At 1.20 per therm, 100,000 Btu of heat costs 1.20 before any allowance for the efficiency of the appliance.

Frequently asked questions

How do I calculate my natural gas bill?

Multiply your usage in therms by the rate per therm and add the fixed charge. For 80 therms at 1.20 with a 15 base charge, the bill is 111.00. If your usage is in CCF, multiply by the therms-per-CCF factor first.

How many therms are in a CCF?

About 1.037 on average, since a CCF is 100 cubic feet and gas averaged about 1,037 Btu per cubic foot in 2025 according to the Energy Information Administration. Your bill shows the exact factor your utility uses.

What is a therm?

A therm is a unit of heat equal to 100,000 Btu.

Why is my actual bill different from the estimate?

Taxes, tiered pricing, separate supply and delivery rates and price adjustments are not modelled. Compare the estimate with the line items on your bill.

Mark Danny

Mark Danny

Mark Danny builds and maintains the free calculators and guides on Area of Irregular Shapes Calculator. Every calculator page explains its formula and shows a worked example, so you can check the working yourself. Spotted a mistake or have a suggestion? Email gulsher.hingoro101@gmail.com.

Articles: 559