Repiping replaces the water supply lines in a house, and its price scales with how many fixtures the new lines must reach and what the pipe is made of. Enter the fixture count, choose PEX, copper or CPVC, and add any drywall repair to get an estimated total.
Repipe Cost Calculator
Whole-house repipe cost from fixture count, home size and pipe material.
Starting values: the calculator opens with 8 fixtures, PEX pipe and no drywall repair, which gives an estimated total of 4,000. The cost per fixture for each material is built into the calculator, so you can change the fixture count, the material and the drywall repair amount, but not the per-fixture price.
How the estimate works
Total = Fixtures × Cost per fixture + Drywall repair
Where:
- Fixtures = the number of water-using fixtures the new lines must serve
- Cost per fixture = a fixed figure for the chosen material
- Drywall repair = the cost of opening and patching walls, or 0 when there is open access, such as a crawlspace
The cost per fixture the calculator uses is 500 for PEX, 850 for copper and 550 for CPVC. Its note describes these as mid-points of roughly 400 to 600 for PEX, 700 to 1,000 for copper and 450 to 650 for CPVC. They are the calculator’s own assumptions, not a quote, and local prices can differ widely, so treat the result as a starting point and get written quotes from plumbers.
What counts as a fixture
A fixture is a point where the plumbing delivers water, typically a sink, toilet, shower or tub, an appliance hookup such as a washing machine, or an outdoor spigot. Walk through the house and count each one, including the kitchen, bathrooms, laundry and exterior connections.
Worked examples
Example 1: the default
8 fixtures in PEX with no drywall repair: 8 × 500 + 0 = 4,000. Using the calculator’s stated ranges, that is between 8 × 400 = 3,200 and 8 × 600 = 4,800.
Example 2: a larger house in copper
12 fixtures in copper with 1,500 for drywall repair: 12 × 850 + 1,500 = 10,200 + 1,500 = 11,700.
Example 3: CPVC with some wall repair
6 fixtures in CPVC with 800 for patching: 6 × 550 + 800 = 3,300 + 800 = 4,100.
Example 4: comparing materials for the same house
For 8 fixtures with no drywall repair, PEX is 4,000, CPVC is 8 × 550 = 4,400 and copper is 8 × 850 = 6,800. The order matches what plumbing guides report: PEX is the least expensive option, CPVC is next, and copper costs the most. Local codes may restrict which materials you can use.
What changes the real price
- Labour. It is the largest part of the bill. One guide puts it at about 70% of the total, because crews must open walls and floors and run new lines.
- Home size and layout. Larger and multistory homes need more pipe and more labour.
- Accessibility. Pipes under concrete or buried in walls cost more to reach than pipes in a crawlspace.
- Drywall repair. Removing and replacing drywall adds cost, and damage from old leaks can make it worse. That is what the drywall box is for.
- Permits and inspections. Most repipe projects require a permit, and a failed inspection can mean reinspection.
- Add-ons. A water main replacement or a new water heater is often done at the same time.
Plumbers price by the fixture or by the linear foot of pipe, not by the square foot.
Signs you may need a repipe
Consistently high or low water pressure, discoloured water, or an unusual taste or smell can point to failing pipes, as can visible cracks, leaks or corrosion, repeated leaks after repairs, and unstable water temperature. Homes with galvanized or lead pipes, or with pipes around 60 years old or more, are common candidates. A repipe can take a few days in a small home and several weeks in a large, multistory house with many fixtures.
What the calculator does not do
- It does not use home size, although the home’s size and layout affect the price. Use the fixture count as the main driver and adjust for size by comparing with quotes.
- It does not let you change the per-fixture price, so if your quotes are higher or lower, scale the total by hand.
- It does not include permits, a water main, a water heater or fixtures themselves.
For related costs, see the plumbing cost calculator and the rough-in plumbing cost per fixture calculator.
Using the estimate with quotes
Ask each plumber for a written quote that states the pipe material, the number of fixtures covered, whether drywall repair and permits are included, and how the price changes if walls turn out to be harder to reach. Divide each total by the fixture count to get a per-fixture price you can compare with the calculator’s. If a quote is far above or below it, ask what the difference covers, since scope, not just price, often explains the gap.
Frequently asked questions
How does the calculator estimate repipe cost?
It multiplies the number of fixtures by a built-in cost per fixture for the chosen material, 500 for PEX, 850 for copper or 550 for CPVC, and adds any drywall repair. Eight PEX fixtures with no repair is 4,000.
Which pipe material is cheapest?
PEX is generally the least expensive, CPVC is next, and copper costs the most. The calculator reflects that order, but local codes may limit which materials you can use.
Does the calculator use my home size?
No. It uses the fixture count, the material and the drywall repair amount. Larger and multistory homes cost more in practice, so compare the estimate with quotes.
How long does a repipe take?
One guide says a few days in a small home and several weeks in a large, multistory home with many fixtures, depending on crew size and how accessible the pipes are.
