Turning a garage, attic, loft or basement into finished living space is usually estimated by area. This room conversion cost calculator multiplies the area you are converting by a cost per square foot, with a separate mode for each of the four space types. The per-foot prices it opens with are placeholders, so replace them with figures from contractor quotes.
Room Conversion Cost Calculator
Cost to convert a garage, attic, loft or basement into finished living space, from the area being converted.
How do you calculate room conversion cost?
Multiply the area by the cost per square foot.
Total = Area × Cost per ft²
Each mode uses the same formula, with its own starting area and rate:
| Mode | Starting area | Starting rate | Result |
|---|---|---|---|
| Garage | 400 ft² | $65 per ft² | $26,000 |
| Attic | 300 ft² | $85 per ft² | $25,500 |
| Loft | 250 ft² | $100 per ft² | $25,000 |
| Basement | 800 ft² | $35 per ft² | $28,000 |
Worked examples
Worked example: a garage
A two-car garage of 400 ft² at $65 per ft²:
Total = 400 × 65 = $26,000
Worked example: an attic with your own quote
A 300 ft² attic where a contractor quotes $110 per ft², because the work includes structural changes:
Total = 300 × 110 = $33,000
Worked example: a basement
A 900 ft² basement at $40 per ft²:
Total = 900 × 40 = $36,000
Area and total compared
For a garage at the $65 starting rate:
| Area | Total |
|---|---|
| 250 ft² | $16,250 |
| 400 ft² | $26,000 |
| 550 ft² | $35,750 |
| 700 ft² | $45,500 |
The four conversion types
The four modes share a formula, but the work involved differs. The calculator’s own note says attic conversions often need structural and egress work, which is one reason an attic rate can sit above a basement rate.
Garage
A garage usually has walls and a roof, but often needs insulation, a finished floor, heating, windows and a replacement for the garage door opening.
Attic
An attic may need floor reinforcement, a staircase, insulation and a safe way out in an emergency. Ask your contractor what your local rules require.
Loft
A loft conversion is priced in the same way. Rates vary with the roof structure and the access.
Basement
A basement often has the structure in place, so work can focus on moisture control, insulation, finishes and utilities. Moisture and ceiling height are the usual questions.
What the room conversion cost calculator leaves out
It multiplies area by one rate. It does not add permits, design fees, new bathrooms or kitchens, extra electrical or plumbing, furniture, or work that your inspector requires. Because the rate you type in has to cover all of this, ask each contractor what their per-square-foot price includes.
Permits for a room conversion
A permit is often needed for work that changes the structure, the use of a space or the plumbing and electrical systems. Rules depend on your area, so check with your local building department before you start.
Comparing quotes
Ask each contractor for an itemised quote, then divide each total by the area to compare prices per square foot. Check that each quote covers the same scope, including insulation, finishes and permits.
Rate and conversion type compared
Because the cost per square foot is a placeholder, the spread between a low and a high quote matters. For the 400 ft² starting garage:
| Rate per ft² | Total |
|---|---|
| $55 | $22,000 |
| $65 | $26,000 |
| $75 | $30,000 |
| $85 | $34,000 |
A $30 difference per square foot moves the garage total by $12,000, so the rate in your quote matters more than small changes in area.
Basement and attic areas compared
At the starting rates, the same formula gives these totals for different areas:
| Space | Area | Rate | Total |
|---|---|---|---|
| Basement | 600 ft² | $35 | $21,000 |
| Basement | 1,000 ft² | $35 | $35,000 |
| Attic | 200 ft² | $85 | $17,000 |
| Attic | 400 ft² | $85 | $34,000 |
Worked example: a loft with your own rate
A 250 ft² loft where the contractor quotes $120 per ft²:
Total = 250 × 120 = $30,000
How do you measure the area to convert?
Enter the floor area you will finish, not necessarily the whole footprint. A garage is simple to measure, since a 20 ft by 20 ft garage is 400 ft². An attic or loft may have low sections that your contractor will not count as usable space. Ask the contractor which area they use to price the work, and enter that figure so the calculator matches the quote.
Worked example: a partly usable attic
A 30 ft by 20 ft attic has a footprint of 600 ft². If your contractor counts only 300 ft² as finished floor area, and quotes $85 per ft²:
Total = 300 × 85 = $25,500
Costs outside the area rate
Several costs are billed as separate items, so ask whether the per-foot rate includes them.
Frequently asked questions
Is the rate in the calculator a real price?
No. Two of the four starting rates are above the published ranges, so replace each one with the rate from your own quote.
