Garage Door Cost Calculator: Estimate by Size & Material

A garage door price depends mostly on its size and what it is made of. This garage door cost calculator takes a single or double door, a material and an opener price, and returns an estimated total.

Construction — Other Calculators

Garage Door Cost Calculator

Garage door replacement cost from door size, material and opener.

$

The starting values are a single steel door with no opener, which gives $900.

How do you calculate garage door cost?

Multiply a base price for the door size by a material factor, then add the opener.

Total = Base price × Material multiplier + Opener

Where the base is $900 for a single door (8 to 9 ft wide) and $1,600 for a double (16 to 18 ft wide), and the multipliers are 1 for standard steel, 1.3 for insulated steel, 2 for wood and 2.2 for aluminum or glass. The opener field is a price you enter, and 0 means none or an existing one.

Worked example: the starting values

Total = 900 × 1 + 0 = $900

All eight combinations

The table shows every size and material the calculator offers, before any opener.

Material Multiplier Single door Double door
Steel (standard) 1 $900 $1,600
Steel (insulated) 1.3 $1,170 $2,080
Wood 2 $1,800 $3,200
Aluminum or glass 2.2 $1,980 $3,520

What should you add for the opener and installation?

Entering the opener

The opener field takes one number. Add the opener and its installation: $350 + $250 = $600 at the low end and $600 + $350 = $950 at the high end.

Worked examples for different doors

Worked examples

A single steel door with an opener

Enter $600 to $950 for the opener and its installation. The total is 900 + 600 = $1,500 to 900 + 950 = $1,850.

What the estimate leaves out

It does not include permits, framing or electrical work for a new opening, or regional price differences. Treat the result as a first estimate and get quotes for your own size and material.

How size, material and opener change the total

The calculator adds the opener after the multiplier, so the opener price is the same for every door. The table uses the two opener amounts from the opener section, $600 and $950.

Door No opener With $600 opener With $950 opener
Single, standard steel $900 $1,500 $1,850
Single, wood $1,800 $2,400 $2,750
Double, insulated steel $2,080 $2,680 $3,030
Double, aluminum or glass $3,520 $4,120 $4,470

What insulation adds

The multiplier of 1.3 for insulated steel adds $270 to a single door and $480 to a double door. Whether insulation is worth it depends on whether the garage is heated, attached to the house or used as a workshop, so decide on the use before the price.

Choosing between single and double

The double door costs $700 more than the single in the standard steel case, and the gap widens with the material multiplier. A double door at 2.2 for aluminum or glass is $1,540 more than the single. Measure the width of the opening and the width of the vehicles, and check how much space you need to open the doors of the car when it is parked inside.

Measuring the opening

Measure the width and the height of the existing opening, and the headroom above it, since a standard door needs space above the opening for the track and the springs. Also measure the space at the sides and the back of the garage, which the opener and the track need. If the opening is not standard, ask the supplier for a custom size, which the calculator does not price.

Frequently asked questions

How does the calculator price a double door?

It uses a $1,600 base against $900 for a single, then applies the material multiplier. A double steel door is $1,600.

What is the multiplier for insulated steel?

1.3, so a single insulated steel door is 900 × 1.3 = $1,170.

How much does an opener add to a garage door?

Enter the opener and its installation as one number. At $600 to $950 it adds that amount to any door, so a single steel door is $1,500 to $1,850.

How much does insulation add?

The multiplier of 1.3 adds $270 to a single steel door and $480 to a double steel door.

Is the estimate good for a non-standard opening?

No. The calculator offers two sizes. Ask a supplier for a quote if your opening is a different width or height.

Mark Danny

Mark Danny

Mark Danny builds and maintains the free calculators and guides on Area of Irregular Shapes Calculator. Every calculator page explains its formula and shows a worked example, so you can check the working yourself. Spotted a mistake or have a suggestion? Email gulsher.hingoro101@gmail.com.

Articles: 559