Estimate the cost of a foundation from the footprint of the building and the type of foundation: a slab on grade, a crawl space or a full basement.
Foundation Cost Calculator
Foundation cost from footprint area and foundation type — slab, crawl space or full basement.
Starting values: a footprint of 1,500 ft² with a slab-on-grade foundation. The calculator gives 10,500.
How the calculator works
Total = footprint area × cost per ft² for the foundation type
The cost per square foot is set by the type:
- Slab on grade: 7 per ft²
- Crawl space: 11 per ft²
- Full basement: 26 per ft²
These are example rates, so replace them with local quotes. The area has a unit selector, so you can enter square metres. Enter the footprint of the building, which is the area of the ground floor, and not the total floor area of all the storeys. A home of 3,000 ft² on two storeys has a footprint of about 1,500 ft².
Worked examples
The same footprint on three foundations
For 1,500 ft²:
- Slab on grade: 1,500 × 7 = 10,500.
- Crawl space: 1,500 × 11 = 16,500.
- Full basement: 1,500 × 26 = 39,000.
A larger footprint
A footprint of 2,000 ft² with a full basement costs 2,000 × 26 = 52,000.
A smaller footprint
A footprint of 1,200 ft² with a crawl space costs 1,200 × 11 = 13,200.
The difference between types
For the 1,500 ft² footprint, a full basement costs 28,500 more than a slab in the example rates. That difference pays for digging and walls, and also for the extra space that you gain.
How the three types differ
A guide to foundations describes them this way:
- Slab. The home sits on a single concrete pad on the ground or on footings. There is no space under the home, so water heaters and other equipment take up living space. It is the cheapest type, because it needs little digging and fewer materials.
- Crawl space. The home sits above a shallow enclosed space with walls around the edge. The space can hold utilities and storage, and it lifts the home off the ground. It costs more than a slab because of the excavation across the whole footprint and the extra concrete for the walls.
- Basement. A full basement gives the most space under the home, and a finished basement is the most comfortable of the underhome options, but it needs the most excavation and walls.
What decides the choice
- Climate and frost. Slabs suit warm or moderate regions where the frost line is shallow or absent. In colder regions the foundation has to sit below a deep frost line, which favours a crawl space or a basement.
- Soil and slope. Slabs need level ground. A crawl space handles a slope well and is less affected by soil that expands.
- Moisture and pests. A slab resists mould and pests better, because nothing is trapped under the floor. A crawl space can collect moisture and needs more care.
- Flooding. A crawl space raises the living area above flood level, and a slab is a poor fit in flood-prone areas.
- Access for repairs. A crawl space makes the plumbing, electrical and heating work easier to reach. Slab repairs, especially to buried utilities, are harder and usually cost more.
What the estimate leaves out
The calculator uses the footprint and the type only. It does not include the site work, such as clearing and grading, a soil test, drainage, waterproofing, backfill or an engineer, and it does not include the difficult soil or a sloped lot that can raise the price. A basement needs the most excavation, so the cost depends a lot on the soil. Add these items from your quotes. For the concrete itself, see the concrete cost calculator and the ICF price calculator. For the building above, see the home addition cost calculator and the modular home cost calculator.
Planning the budget
Choose the type of foundation from your climate, soil and plan, then run the calculator for that type. If you are weighing two types, calculate both for the same footprint and compare the difference with what you gain. A basement adds a lot of space, but a crawl space gives access to the utilities at a lower price, and a slab is the simplest.
Get the site checked
The type of soil, the slope and the depth of the frost line affect what a foundation needs. A soil test and an engineer can tell you what your site needs before you set the budget, and difficult ground can mean a more expensive foundation than the rate in the calculator.
Plan for water
Moisture is the main enemy of a foundation. A basement or crawl space needs drainage and waterproofing, and a slab in a flood-prone area needs careful design. Ask your contractor what they include for water control, and add anything that is not in the quote.
Footprint and building size
Because the calculator uses the footprint, a taller home on the same footprint has the same foundation cost in the calculator, though the foundation may need to be stronger to carry more weight. Ask your engineer whether a second storey changes the design.
Frequently asked questions
How much does a foundation cost?
It depends on the type, the size and the site. At the example rates, a 1,500 ft² footprint costs 10,500 for a slab, 16,500 for a crawl space and 39,000 for a full basement.
Which foundation is the cheapest?
A slab is the cheapest, because it needs little digging and fewer materials. A crawl space costs more, and a full basement the most.
Do I enter the footprint or the total floor area?
Enter the footprint, which is the area of the ground floor. A two-storey home of 3,000 ft² has a footprint of about 1,500 ft².
What affects the choice of foundation?
Climate and frost depth, soil and slope, moisture, flood risk and access for repairs. Slabs suit warm climates and level ground, and crawl spaces and basements suit colder regions.
