A granite countertop quote is usually a price per square foot, so the total depends on the area, the stone and the labor. This granite countertop cost calculator multiplies your countertop area by the slab price for the stone level you pick plus a fabrication and installation rate per square foot.
Granite Countertop Cost Calculator
Installed cost of a granite countertop from area, slab grade and fabrication/edge pricing.
The starting values are 40 square feet of Level 1 granite at $40 per square foot, with $15 per square foot for fabrication. That gives $2,200.
How is a granite countertop cost calculated?
Add the stone price and the labor price per square foot, then multiply by the area.
Total = Area × (Slab price + Fabrication price)
Where area is the countertop surface in square feet, slab price is the stone cost per square foot for the level you choose, and fabrication price is the cutting, edging and installation cost per square foot. The calculator uses $40, $65 and $100 per square foot for Levels 1, 2 and 3.
Worked example: the starting values
Total = 40 × (40 + 15)
Total = 40 × 55 = $2,200
The same 40 square feet costs 40 × (65 + 15) = $3,200 at Level 2 and 40 × (100 + 15) = $4,600 at Level 3. The calculator does not define the levels, so treat them as low, middle and high price bands and match them to the slabs on your quote.
Which extras are not in the calculator?
- Honed finish: $10 to $20 per square foot more, which is $400 to $800 on 40 square feet.
- Leathered finish: $15 to $25 per square foot more.
- Removing the old countertop: $4 to $7 per square foot, which is $160 to $280 on 40 square feet.
- Sink cutout: about $100. Cooktop cutout: about $200, so $300 for both.
- Sealing: $100 or more per year.
Worked examples for different kitchens
Worked examples
Small kitchen with an installer rate
Use 40 square feet, Level 1 and $35 fabrication. The total is 40 × (40 + 35) = $3,000. Add a honed finish at $10 per square foot and the total becomes $3,400.
Replacing an old countertop
The same 40 square feet at Level 2 with $35 fabrication is $4,000. Removal at $4 to $7 per square foot adds $160 to $280, and the two cutouts add about $300.
Comparing two quotes
Enter each quote’s slab price and labor price per square foot. A quote at $100 plus $35 on 40 square feet is $5,400, which is $2,400 more than $3,000 for the same area at $40 plus $35. The difference comes from the stone alone.
What the calculator leaves out
It does not include edge profiles, backsplash, delivery, plumbing disconnects or sales tax. Prices change by region and by slab, so confirm everything against a written quote before you rely on the total.
How area, level and fabrication change the total
The table shows three areas at each of the calculator’s levels, with $15 per square foot for fabrication.
| Area | Level 1 | Level 2 | Level 3 |
|---|---|---|---|
| 25 ft² | $1,375 | $2,000 | $2,875 |
| 40 ft² | $2,200 | $3,200 | $4,600 |
| 55 ft² | $3,025 | $4,400 | $6,325 |
The fabrication rate
With 40 ft² of Level 1, a fabrication rate of $15, $25 or $35 gives $2,200, $2,600 or $3,000. Raising the rate by $10 adds $400, which is the same effect as a $10 rise in the stone price.
Measuring the countertop
Measure each run by its length and depth in feet and add the areas. Two runs of 14 ft and 6 ft at a depth of 2 ft are 28 + 12 = 40 ft², the area used in the examples. Add an island or a peninsula as a separate rectangle, and include the overhang, since the stone covers it.
Choosing the level
The level only sets the stone price per square foot, so pick the one closest to the slab quoted to you, or enter the quoted price in place of the default. A quote gives the price for the specific slab, which matters more than a general band.
Frequently asked questions
How much is a 40 square foot granite countertop?
With the calculator’s Level 1 default of $40 plus $15, it is $2,200. With a $35 installer rate it is $3,000.
How do I use the calculator for a quote?
Enter the area, choose the closest level, then set fabrication to the quoted labor rate per square foot.
How does the area change the granite countertop cost?
The total is proportional to the area. At Level 1 and $15 fabrication, 25 ft² costs $1,375, 40 ft² costs $2,200 and 55 ft² costs $3,025.
How much does the fabrication rate matter?
Each extra $10 per ft² adds $400 on a 40 ft² counter, which is the same as a $10 rise in the stone price.
