Kitchen cabinets are priced per linear foot, and the tier you pick (stock, semi-custom or custom) changes the total more than anything else. This kitchen cabinet cost calculator multiplies your run of cabinets in linear feet by the price for the tier plus an installation rate per linear foot.
Kitchen Cabinet Cost Calculator
Cost of new kitchen cabinets from linear feet of cabinetry, price tier and installation.
The starting values are 20 linear feet of semi-custom cabinets at $250 per linear foot with $40 per linear foot for installation, which gives $5,800.
How is kitchen cabinet cost calculated?
Add the cabinet price and the installation price per linear foot, then multiply by the length of the run.
Total = Linear feet × (Cabinet price + Installation price)
Where linear feet is the total length of base and wall cabinets along the walls, cabinet price is the cost per linear foot for the tier, and installation price is the labor per linear foot. The calculator uses $120 for stock, $250 for semi-custom and $500 for custom cabinets.
Worked example: the starting values
Total = 20 × (250 + 40)
Total = 20 × 290 = $5,800
The same 20 linear feet costs 20 × (120 + 40) = $3,200 with stock cabinets and 20 × (500 + 40) = $10,800 with custom cabinets.
Worked examples for different kitchens
Worked examples
Small galley kitchen
Use 20 linear feet of stock cabinets with $50 installation. The total is 20 × (120 + 50) = $3,400. Installation alone is 20 × 50 = $1,000.
Custom cabinetry
Enter 20 linear feet at the custom tier. The total is $10,800. If you set installation to $100 as a high estimate, the total is 20 × (500 + 100) = $12,000.
What the calculator leaves out
It does not include countertops, appliances, demolition, plumbing, electrical or hardware beyond what the cabinet price covers. Measure the run on each wall, confirm whether quotes are for cabinets alone or installed, and compare at least two written estimates.
How the length, tier and installation rate change the total
The first table shows three runs at each tier, with $40 per linear foot for installation.
| Run | Stock ($120) | Semi-custom ($250) | Custom ($500) |
|---|---|---|---|
| 10 linear ft | $1,600 | $2,900 | $5,400 |
| 20 linear ft | $3,200 | $5,800 | $10,800 |
| 30 linear ft | $4,800 | $8,700 | $16,200 |
The installation rate
On a 20 linear foot semi-custom run, an installation rate of $30, $40 and $60 per linear foot gives $5,600, $5,800 and $6,200. The tier changes the total far more than the installation rate does, so check the cabinet quote first.
Measuring the run
Measure the length of each wall that will carry cabinets and add them. A kitchen with a 12 ft wall and an 8 ft wall has 20 linear feet of base cabinets. Subtract the space taken by the range and the dishwasher, because these are not cabinets. If your quote prices wall cabinets separately, run the calculator a second time for the upper run and add the two totals.
Mixing tiers
Many kitchens combine tiers, such as stock cabinets on the wall and a custom island. Run the calculator once for each tier, with the linear feet for that part, and add the results.
Comparing a quote with the estimate
Divide a cabinet quote by the linear feet to get a price per linear foot. A figure between the stock and semi-custom values suggests a good stock line or a basic semi-custom one, and a figure above the custom value usually means a heavy specification such as a high-end finish, specialty hardware or a complicated layout. Ask what is included, since some quotes cover only the boxes and doors while others add the hardware, crown moulding and the delivery.
Install the cabinets only after the measurements are confirmed, because a change of a few inches in a wall length can add or remove a whole cabinet from the order.
Frequently asked questions
How much does a 20 linear foot kitchen cost?
At the calculator’s semi-custom default of $250 plus $40 installation it is $5,800.
How do I measure linear feet of kitchen cabinets?
Measure each wall that will carry cabinets and add the lengths, leaving out gaps for the range and dishwasher. A 12 ft wall and an 8 ft wall make 20 linear feet.
How much does the tier change the price?
On 20 linear feet with $40 installation, stock costs $3,200, semi-custom $5,800 and custom $10,800.
Can I mix cabinet tiers in one kitchen?
Yes. Run the calculator once for each tier with its own linear feet and add the totals.
