Estimate the installed cost of a bay window from the width of the opening, or of a picture window from its glass area.
Window Installation Cost Calculator
Installed cost of a bay window or a large picture window, from window size and complexity.
Starting values: a bay window with an opening 8 ft wide and no extra structure, which gives 2,800. The picture window mode starts at 24 ft² of glass at 45 per ft², which gives 1,080.
How the calculator works
Bay window
Total = opening width × 350 per linear foot + extra structure
The rate of 350 per linear foot of opening is built into the calculator, and it is an example that covers the window unit and its installation. The extra input is for the roof or support structure, and is 0 by default. The rate cannot be changed in the tool, so for a different rate, calculate the width times your rate by hand and add it to the extras.
Picture window
Total = glass area × installed cost per ft²
The installed cost per square foot is your own input, with a starting value of 45. The inputs have unit selectors, so you can use metres.
Worked examples
A bay window
An opening of 8 ft: 8 × 350 = 2,800. A narrower opening of 6 ft costs 6 × 350 = 2,100.
A bay window with a roof
An opening of 10 ft with 3,000 entered for the roof and support structure: 10 × 350 = 3,500, and the total is 6,500.
A picture window
A window 6 ft wide and 4 ft high has 24 ft² of glass: 24 × 45 = 1,080. A larger window of 5 ft by 6 ft is 30 ft², and costs 30 × 45 = 1,350. With a higher installed rate of 60, the 24 ft² window costs 1,440.
What drives the cost of a bay window
A guide to bay window costs says the main factor is whether you replace an existing unit or build a new opening:
- Replacement or new opening. Swapping a window in an existing opening is simpler. A new bay means cutting into an exterior wall, reframing and finishing inside and out, which is much more work.
- Structure. A new opening often needs a new header or other support to carry the load above it, and damage found in the old framing adds repair work.
- Roof and exterior. Extending the roof or the eaves over the bay, and matching the siding or masonry, add to the job.
- Size. A wider or deeper bay needs more framing, more glass and more detail.
- Frame material. Vinyl and fibreglass generally cost less up front than wood or composite frames, which look classic but need more upkeep.
- Glass. Low-E or multi-pane glass costs more than standard glass.
- Interior finishes. Built-in seating, shelving, trim and electrical work add to the total.
- Permits. Structural changes usually need permits, and historic districts can add approval steps.
Using the estimate
For a replacement bay in an existing opening, the extras can be 0. For a new opening or a bay with a roof, put the structure, roof and finishing costs in the extras input. The tool gives a budget figure, so ask for written quotes from installers, and compare them on the same basis, with the same size, glass and frame.
Picture windows
A picture window is a large fixed pane that gives a view, and its price depends on the area of glass, the frame and the type of glass. The calculator multiplies the glass area by the rate, so the result is only as good as the rate. Use a rate from a quote for your window, and check whether it includes the frame and the installation.
Related calculators
For work around a window, see the home addition cost calculator, the home remodeling cost calculator and the exterior house painting cost calculator.
Planning and comparing quotes
Window quotes are easiest to compare when each one states the same things: the size of the opening, the type of window, the frame material, the glass, and whether the price includes removal of the old unit, framing, trim and finishing. A quote for the window alone is not comparable with one that includes a new opening and the work around it.
Checking the calculator against a quote
For a bay window, divide the quoted total by the width of the opening in feet, after taking off any roof or structure that is priced separately. Compare it with the rate of 350 built into the calculator. If your quote is far from it, put the difference in the extras input, or work out the cost by hand with your own rate. For a picture window, divide the total by the glass area in square feet and enter the result as the installed rate.
Before you order
Measure the opening on site and ask the installer to confirm the size, because the size of the window is the main input. Ask about the lead time for made-to-order units, and whether permits are needed. The guide says structural changes usually need permits, and that historic districts can add steps.
Frequently asked questions
How much does it cost to install a bay window?
At the example rate of 350 per foot of opening, an opening of 8 ft costs 2,800. A new opening or a roof over the bay adds to that, so enter it in the extras input.
How do I price a picture window?
Multiply the glass area in square feet by the installed cost per square foot. A window of 24 ft² at 45 costs 1,080.
Why is a new bay window more expensive than a replacement?
A new bay means cutting into the wall, reframing, adding a header or support, and finishing inside and out. Replacing a window in an existing opening is simpler.
Does the estimate include the roof over the bay?
No. Put the roof and support structure in the extras input.
