Work out how much marble you need for a floor, wall or countertop, including a waste allowance, and estimate the installed cost by grade.
Marble Calculator
Marble slab/tile quantity and installed cost for a floor, wall or countertop, from area and marble grade.
Starting values: an area of 100 ft² of select-grade marble with a 10 percent waste allowance. The calculator gives 110 ft² of marble and an estimated total of 3,850.
How the calculator works
Marble needed = area × (1 + waste ÷ 100)
Total = marble needed × cost per ft² for the grade
The cost per square foot covers the material and the installation, and is set by the grade:
- Commercial or standard: 20 per ft²
- Select: 35 per ft²
- Premium or exotic: 70 per ft²
These are example rates, so replace them with local quotes. The waste allowance is a percentage that you set, with a starting value of 10. The area has a unit selector, so you can enter square metres.
Note that the cost is worked out on the area including waste, so the waste is paid for in the estimate, as it would be when you buy extra material.
Worked examples
One area, three grades
For 100 ft² with 10 percent waste, you need 110 ft² of marble:
- Standard: 110 × 20 = 2,200.
- Select: 110 × 35 = 3,850.
- Premium: 110 × 70 = 7,700.
A bathroom floor
A floor of 45 ft² in select marble with 10 percent waste: 45 × 1.10 = 49.5 ft² of marble, and 49.5 × 35 = 1,732.50.
A kitchen countertop
A countertop area of 30 ft² in premium marble with 15 percent waste: 30 × 1.15 = 34.5 ft², and 34.5 × 70 = 2,415.
The effect of the waste allowance
For 100 ft² of select marble, a waste allowance of 0 percent costs 100 × 35 = 3,500, while 15 percent costs 115 × 35 = 4,025. A difference of 525 shows why the allowance is worth thinking about.
Choosing the waste allowance
The right allowance depends on the layout, the shape of the room, the size of the tiles or slabs, the pattern and the number of cuts. The 10 percent starting value is only a place to begin, and is not a rule. A cost guide notes that cutting larger tiles into smaller pieces increases waste, and that a complex pattern adds both waste and labour. For an unusual layout, ask your installer how much extra to order. If the marble has veining you want to match, ask whether more is needed to select and place the pieces.
Area is not the same as the amount to buy
The area of the floor is not the same as the quantity of marble to buy. Measure the surface first, take off any openings, then add the allowance. The result is the area of marble to order, and the supplier will round it up to whole tiles or slabs.
What drives the price of marble
A guide to marble flooring costs lists these factors:
- Type. Carrara, Calacatta, Breccia, Emperador, Crema Marfil and onyx are priced differently, and some of them cost more.
- Grade. Marble is graded from A to D, and grade A, with the fewest imperfections, costs more.
- Tile or slab. Tiles are generally cheaper and easier to install. Slabs cost more and are harder to install.
- Finish. A standard smooth finish is the most affordable, and tumbled, chiselled or flamed finishes cost more.
- Pattern and labour. Unusual patterns can raise labour costs by 10 to 25 percent, and extras such as a diagonal layout, removing old flooring and repairing the subfloor add cost.
The calculator has only three grades, and one rate for each. It does not separate tiles from slabs, or allow for the finish, the thickness or the preparation of the subfloor, so add those from your quotes.
Related calculators
For other surfaces, see the granite countertop cost calculator, the quartz countertop cost calculator and the countertop square footage calculator. For tile work, see the tile installation cost calculator and the bathroom remodel cost calculator.
Planning and comparing quotes
Marble quotes are easiest to compare when each one states the same things: the type and the grade, whether tiles or slabs are used, the finish, the area measured, the waste allowance, and whether the price includes preparation of the surface and removal of the old one. A quote for the stone alone is not comparable with one that includes installation.
Checking the calculator against a quote
Divide a quoted total by the area with waste to get a rate per square foot, and compare it with the 20, 35 or 70 used in the calculator. If your quote differs a lot, ask which items explain the gap, such as the type of marble, a special pattern or work on the subfloor. A cost guide advises asking installers to itemise their quotes, and to say whether waste is included, so that the quotes can be compared fairly.
Measuring the surface
For a floor, multiply the length by the width. For a wall, multiply the length by the height. For a countertop, add up the area of each section. Use the countertop square footage calculator or the bathroom area calculator if the surface is made of several parts.
Frequently asked questions
How much marble do I need?
Multiply the area by 1 plus the waste allowance. For 100 ft² with 10 percent waste, you need 110 ft².
How much does marble cost to install?
It depends on the grade, the type and the layout. At the example rates, 100 ft² with 10 percent waste costs 2,200 for standard, 3,850 for select and 7,700 for premium marble. Use local quotes for a real figure.
How much waste should I allow for marble?
It depends on the layout, the tile size, the pattern and the number of cuts. The calculator starts at 10 percent, so ask your installer for the right figure.
Does the estimate include installation?
Yes. The rate for each grade covers material and installation, but not subfloor repairs or removing old flooring.
