Estimate the installed cost of a Quonset-style steel building from its footprint area and finish level, or find its floor area from the width and length.
Quonset Hut Cost Calculator
Cost of a steel Quonset-style building from footprint area, and its approximate floor area from width and length.
Starting values: a footprint of 1,200 ft² with a shell-only finish, which gives 24,000. In the floor area mode, a building 30 ft wide and 60 ft long has 1,800 ft².
How the calculator works
Installed cost mode
Total = footprint area × cost per ft² for the finish level
Where:
- Footprint area is the floor area of the building.
- Shell only (kit plus foundation) uses an example rate of 20 per ft².
- Finished (insulated and wired) uses an example rate of 50 per ft².
The calculator notes its own ranges for these rates, about 15 to 25 for a shell and 35 to 65 for a finished building. They are examples to test a budget with, so replace them with quotes for your site. The area input has a unit selector, so you can enter square metres.
Floor area mode
Floor area = width × length
The width is the span across the arch, which the tool calls the diameter of the half-circle cross-section, and the length is the distance along the building. The tool multiplies the two, and notes that the usable floor near the curved walls is somewhat less, because headroom falls away at the sides.
Worked examples
The same footprint at both finish levels
For 1,200 ft²:
- Shell only: 1,200 × 20 = 24,000.
- Finished: 1,200 × 50 = 60,000.
A larger building
For 2,000 ft², a shell costs 2,000 × 20 = 40,000, and a finished building costs 2,000 × 50 = 100,000.
From dimensions to cost
Suppose you plan a building 30 ft wide and 60 ft long. In the floor area mode, 30 × 60 = 1,800 ft². Enter 1,800 in the cost mode, and the shell costs 1,800 × 20 = 36,000. Choosing the finished level gives 1,800 × 50 = 90,000.
A smaller workshop
A building 24 ft by 40 ft has 960 ft². A shell at the example rate costs 960 × 20 = 19,200.
What changes the price of a steel arch building
A manufacturer pricing page names four main factors:
- Use and size. The size and the use, such as a garage, a workshop or a house, affect how much steel is needed and how thick it must be.
- Site. Wind and snow loads at your location may call for a different design or a thicker steel gauge.
- Assembly. Many buyers put the building up themselves, and hiring a contractor adds to the cost.
- Customisation. Parts and accessories should be priced into the budget from the start.
The page does not list the following, but buyers commonly ask about them, so ask each supplier whether the quote includes them: end walls, doors, a concrete slab and footings, insulation, and engineered drawings for a building permit.
Using the estimate
The calculator has one rate for each finish level. It does not know about end walls, doors, the slab, the site work or the permit, so use the shell figure as a rough budget for the kit and foundation, and add the other items from your quotes. The finished figure is for a building that is insulated and wired, and is only as accurate as the rate you choose.
Related calculators
For a plain rectangular building, see the square building calculator. For the base, see the foundation cost calculator and the concrete cost calculator. For a metal roof on another building, see the metal roof cost calculator.
Planning and comparing quotes
Quotes for a steel arch building are easiest to compare when each one states the same things: the width and length, the steel gauge, whether the end walls, doors and windows are included, the foundation or base plates, the insulation, and whether the price covers erection or only the kit. A low price for a kit alone is not comparable with a price for a finished, erected building.
Checking the calculator against a quote
Divide a quoted total by the footprint area to get a rate per square foot, and compare it with the 20 or 50 used in the calculator. If your quote is far from it, ask what explains the gap, such as a thicker gauge for snow or wind, a concrete slab, or an insulation package. Two or three quotes give you a better local rate than any example figure, and you can enter it to test other sizes.
Doing the work yourself
The manufacturer guide notes that many customers assemble the building themselves, and that hiring a contractor adds to the cost. Even then, plan for the slab, the engineered drawings that a permit may need, and the delivery of the kit to your site.
Before you commit to a budget
Write down the width, the length and the finish level you expect, run both finish levels in the calculator, and keep the two results as a range. Then ask suppliers to quote the same size, so that you can see how far the real prices sit from the example rates.
Frequently asked questions
How much does a Quonset hut cost?
It depends on the size, the steel, the site and the finish. At the example rates, 1,200 ft² costs 24,000 as a shell and 60,000 as a finished building. Use quotes for a real figure.
How do I find the floor area of a Quonset hut?
Multiply the width by the length. A building 30 ft wide and 60 ft long has 1,800 ft², though the usable floor near the curved walls is somewhat less.
What is the difference between shell only and finished?
Shell only covers the kit and the foundation. Finished means the building is also insulated and wired, which uses a higher rate.
What affects the price of a steel arch building?
A manufacturer guide names the size and use, the wind and snow loads at your site, who assembles the building, and the accessories you choose.
