Gutter Cost Calculator: Installed Price by Length & Material

Estimate the cost of new gutters from the length of gutter, the material and the number of downspouts.

Construction — Other Calculators

Gutter Cost Calculator

Gutter installation cost from linear footage, material and downspout count.

$

Starting values: 150 ft of aluminum gutter with 4 downspouts at 40 each. The calculator gives 1,360.

How the calculator works

Total = gutter length × cost per foot for the material + downspouts × cost per downspout

The cost per linear foot is set by the material:

  • Vinyl: 5.50 per ft
  • Aluminum: 8 per ft
  • Steel: 11.50 per ft
  • Copper: 25 per ft

The number of downspouts and the cost of each are your own inputs, with starting values of 4 and 40. All the rates are examples, so replace them with local quotes. The length has a unit selector, so you can enter metres.

Worked examples

The same 150 ft in four materials

With 4 downspouts at 40, the downspouts cost 160.

  • Vinyl: 150 × 5.50 = 825, plus 160 is 985.
  • Aluminum: 150 × 8 = 1,200, plus 160 is 1,360.
  • Steel: 150 × 11.50 = 1,725, plus 160 is 1,885.
  • Copper: 150 × 25 = 3,750, plus 160 is 3,910.

A smaller house

A run of 90 ft in aluminum with 3 downspouts at 40: 90 × 8 = 720, plus 120 gives 840.

A larger house

A run of 220 ft in steel with 6 downspouts at 45: 220 × 11.50 = 2,530, plus 270 gives 2,800.

Finding the length

Gutters run along the eaves, so add up the length of every eave where you want a gutter. For a simple rectangular house, that is the two long sides and, if the roof slopes that way, the two ends. A gutter guide gives a rough shortcut, which is to divide the roof area in square feet by 10 to get a rough number of linear feet, but measuring the eaves is more accurate. Also note the width of the current gutter and the total length in feet, since installers ask for them.

Counting downspouts

Every run of gutter needs a place for the water to leave. Count a downspout at each low point and at each corner or end of a long run, and ask your installer how many your roof needs. The calculator uses the number you enter, and each downspout has a cost of its own, since the material and the shape change the price.

What drives the price of gutters

A gutter cost guide names these factors:

  • Material. Vinyl is the cheapest and copper the most expensive, with aluminium, galvanised steel, stainless steel and zinc in between. The material usually sets the price per foot.
  • Style. K-style gutters are the most common and hold the most water. Half-round gutters are more traditional but hold less and need brackets. Decorative and custom styles cost more.
  • Seamless or sectional. Sectional gutters are joined from precut pieces. Seamless gutters are cut to fit the house on site, which takes longer and costs more, but they resist leaks better and last longer.
  • Height of the house. Taller homes need longer downspouts, and each extra storey adds labour.
  • Removing old gutters. Taking out the existing system adds removal and disposal charges.
  • Add-ons. Gutter guards, downspout extensions, screens, heat tape and splash blocks each add cost.

Using the estimate

The calculator uses a single rate for the material, so it does not know the style, the number of storeys, or whether the gutters are seamless. If your quote is for seamless gutters or a tall house, use a higher rate or add the extra cost by hand. The cost of removing old gutters, guards and repairs to the fascia or roof is not included.

For other jobs on the same roof, see the roof replacement cost calculator and the asphalt shingle roof cost calculator. To compare the price of material by the foot, see the price per linear foot calculator and the linear feet calculator.

Planning and comparing quotes

Gutter quotes are easiest to compare when each one states the same things: the material, the style, whether the gutters are seamless, the length in feet, the number of downspouts, and whether the removal of the old system is included. A low price per foot can hide missing items, such as guards or downspout extensions, so ask for an itemised quote.

Checking the calculator against a quote

Subtract the cost of the downspouts from the quoted total, and divide the rest by the length in feet to get the price per foot. Compare it with the rate you used in the calculator. If the quote is much higher, ask whether it is for seamless gutters, a taller house or extra items. Using two or three quotes gives you a better local rate than the example figures.

Repairing or replacing

If only a short section is damaged, a repair may cost less than a new run. If the gutters are worn along most of the house, a full replacement is usually easier to price, and the calculator is suited to that case. Ask an installer to check the fascia boards behind the gutters, since damage there adds to the job.

Frequently asked questions

How much does it cost to install gutters?

It depends on the length, the material and the downspouts. At the example rates, 150 ft of aluminum gutter with 4 downspouts costs 1,360. Use local quotes for a real figure.

Which gutter material is the cheapest?

Vinyl is the cheapest, and copper the most expensive. Aluminium, steel, stainless steel and zinc fall in between.

How do I measure for gutters?

Add up the length of every eave that needs a gutter, in feet. A rough shortcut from a gutter guide is to divide the roof area by 10, but measuring the eaves is more accurate.

Are seamless gutters more expensive?

Yes. They are cut to fit the house on site, which takes longer and costs more, but a gutter guide says they resist leaks better and last longer.

Mark Danny

Mark Danny

Mark Danny builds and maintains the free calculators and guides on Area of Irregular Shapes Calculator. Every calculator page explains its formula and shows a worked example, so you can check the working yourself. Spotted a mistake or have a suggestion? Email gulsher.hingoro101@gmail.com.

Articles: 559