Lumber Cost Calculator: Price by Piece Count

Lumber for a framing job is bought by the piece but priced by the foot, so the total depends on how many pieces you need, how long they are and what a linear foot costs. This lumber cost calculator multiplies the piece count by the length to get total linear feet, then multiplies by your price per linear foot.

Framing & Lumber Calculators

Lumber Cost Calculator

Total lumber cost for a framing job from a piece count, length and price per linear or board foot.

$
Example price — replace with your local quote.

The starting values are 40 pieces at 8 feet and $1.20 per linear foot, which is 320 linear feet and $384.

How is lumber cost calculated?

Multiply the number of pieces by the length of each piece, then by the price per linear foot.

Total linear feet = Pieces × Length
Total cost = Total linear feet × Price per linear foot

Where length is in feet. If a store quotes a price per piece, divide it by the length to get the price per linear foot. The calculator does not use board feet, so it suits dimensional lumber priced by the piece or the foot.

Worked example: the starting values

Linear feet = 40 × 8 = 320
Cost = 320 × 1.20 = $384

That is $9.60 per 8 foot piece.

Worked examples for different jobs

Worked examples

Longer pieces

For 24 pieces of 12 feet at $0.8333 per linear foot, the linear feet are 288 and the cost is 288 × 0.8333 = $240.

Low and high price per foot

The same 320 linear feet cost 320 × 0.375 = $120 at the 8 foot low and 320 × 1.00 = $320 at the 8 foot high.

How the piece count and the price per foot change the total

The first table keeps the 8 ft length and $1.20 per linear foot and changes only the number of pieces.

Pieces Linear feet Total at $1.20
20 160 $192
40 320 $384
60 480 $576
80 640 $768

The second table keeps 320 linear feet and changes the price per foot, which is the number that moves most between suppliers and between weeks.

Price per linear foot Total for 320 ft Same as a price per 8 ft piece
$0.80 $256 $6.40
$1.00 $320 $8.00
$1.20 $384 $9.60
$1.50 $480 $12.00

Converting piece prices

Suppliers quote studs and boards by the piece, so divide by the length before you enter it. A $5.60 stud of 8 ft is $0.70 per foot, an $8.50 piece of 10 ft is $0.85 per foot and an $11.40 piece of 12 ft is $0.95 per foot. Longer pieces are often cheaper per foot, but they are only worth buying if your cuts use the length without much offcut.

Adding waste and tax

The calculator does not add waste or tax, so work these out yourself. If you add 10% waste to the starting 320 linear feet, you buy 352 feet and the cost is $422.40. A sales tax of 8% on the $384 starting total would add $30.72, which gives $414.72. Your own rate and waste figure will differ.

Planning the piece count

Start from the cut list for the job, not from the area. Count the studs, plates, joists and blocking you need, add the pieces that will be cut down from longer stock and round each size up to whole pieces. If you mix lengths, run the calculator once for each length and add the totals, because a price per linear foot often differs between 8, 10 and 12 foot pieces.

Frequently asked questions

How do I calculate the cost of lumber?

Multiply pieces by length to get linear feet, then multiply by the price per linear foot. Forty 8 foot pieces at $1.20 cost $384.

How do I convert a per-piece price to a price per linear foot?

Divide the piece price by its length. A $5 eight foot stud is 5 ÷ 8 = $0.625 per foot.

What is the current framing lumber price?

NAHB reports Madison’s Lumber Price Index at $459.10 per 1,000 board feet as of October 30, with futures at $520.00.

Does the calculator include tax or delivery?

No. It multiplies linear feet by your price, so add tax, delivery and waste separately.

How do I add waste to a lumber estimate?

Multiply the linear feet by one plus your waste allowance before pricing. With 10% waste the starting 320 ft becomes 352 ft, which costs $422.40 at $1.20.

Is it cheaper to buy longer pieces?

Often the price per foot is lower, but only if your cuts use the length well. Compare the per-foot price of each length, then check how much would be left over.

Mark Danny

Mark Danny

Mark Danny builds and maintains the free calculators and guides on Area of Irregular Shapes Calculator. Every calculator page explains its formula and shows a worked example, so you can check the working yourself. Spotted a mistake or have a suggestion? Email gulsher.hingoro101@gmail.com.

Articles: 559