Price Per Linear Foot Calculator

A price per linear foot turns a total price and a length into a single rate you can compare. Use the rate mode to find the price per linear foot from a total, or the total mode to find the cost when you already know the rate.

Linear & Yard Measure Calculators

Price Per Linear Foot Calculator

Back into a price-per-linear-foot rate from a total price and length, or the reverse.

$

Starting values: in rate mode the calculator opens with a total price of 240 for 100 linear feet and returns 2.40 per linear foot. In total mode it opens with a rate of 2.40 per linear foot and 100 linear feet, and returns 240. The money amounts are example figures; use the prices from your own quote or receipt.

What a linear foot is

A linear foot is simply a length equal to one foot, sometimes written lineal foot. It measures length in a straight line and says nothing about width or thickness. That is why materials that come in strips, such as trim, edging, fencing rails, rope and gutters, are often sold by the linear foot, while materials that cover a surface are priced per square foot.

The two formulas

Rate = Total price ÷ Linear feet

Total price = Rate × Linear feet

Where:

  • Rate = the price of one linear foot
  • Total price = what you pay for the whole length
  • Linear feet = the total length in feet

Worked examples

Example 1: finding the rate (the default)

A total of 240 for 100 linear feet is 240 ÷ 100 = 2.40 per linear foot.

Example 2: comparing two offers

One seller offers 100 ft for 240, which is 2.40 a foot. Another offers 50 ft for 128. The rate is 128 ÷ 50 = 2.56 a foot, so the second offer costs 0.16 more per foot even though its total is lower. Comparing the rate, not the total, is the point of the calculation.

Example 3: finding the total

You need 8 lengths of 12 ft and 3 lengths of 10 ft. Linear feet = (8 × 12) + (3 × 10) = 96 + 30 = 126 ft. At 2.40 per foot the total is 126 × 2.40 = 302.40. To find the total length of several pieces, add each length together.

Example 4: allowing for waste

Off-cuts and mistakes mean you rarely use every inch. Adding 10% extra is a common rule: 126 × 1.10 = 138.6 ft, which at 2.40 per foot is 332.64. The calculator does not add waste, so enter the longer length when you want it included.

Converting between units and prices

The calculator works in feet. To price by another length, scale the rate:

  • Per yard = Rate per foot × 3. At 2.40 a foot, a yard costs 7.20.
  • Per metre = Rate per foot ÷ 0.3048. At 2.40 a foot, a metre costs about 7.87.
  • Per inch = Rate per foot ÷ 12. At 2.40 a foot, an inch costs 0.20.

From a price per square foot

A strip of material has a width, so its price per linear foot is its price per square foot times its width in feet: Rate per linear foot = Price per sq ft × Width in feet. A trim board 6 inches (0.5 ft) wide priced at 3.00 per sq ft costs 3.00 × 0.5 = 1.50 per linear foot. The calculator does not do this conversion, so work it out before you enter a rate.

Getting a fair comparison

  • Compare like with like. A rate for a thick or wide board is not comparable with a rate for a thin one.
  • Check what the price includes. Delivery, tax, cutting and fittings can change the effective rate.
  • Use the length you will actually buy, including waste, when you work out a total.

What the calculator does not do

It divides or multiplies two numbers and nothing more. It does not add waste, tax or delivery, convert units, or account for the width of the material. For that, work through the steps above, and for converting lengths see the linear feet calculator.

Checking a quote with several lines

Quotes often list more than one item at different rates, and a single average rate makes them easy to compare with another supplier. Suppose one line is 60 ft at 2.40, which is 144.00, and another is 45 ft at 3.10, which is 139.50. The total is 144.00 + 139.50 = 283.50 for 60 + 45 = 105 ft, so the blended rate is 283.50 ÷ 105 = 2.70 per linear foot. Enter 283.50 and 105 in rate mode to confirm it.

The same approach shows which line is pulling the average up. If the blended rate looks high, compare each line’s own rate against a competing quote before you accept the total.

Rounding and checking

Keep the full length and total in the calculation and round only the final rate to the nearest cent. As a check, multiply the rate by the length: 2.40 × 100 should return 240. If it does not, the rate was rounded too early or a figure was mistyped.

Frequently asked questions

How do I calculate price per linear foot?

Divide the total price by the number of linear feet. A total of 240 for 100 feet is 2.40 per linear foot.

What is the difference between a linear foot and a square foot?

A linear foot is a length of one foot. A square foot is an area of one foot by one foot. Strip materials are priced per linear foot, and surface materials per square foot.

How do I turn a price per square foot into a price per linear foot?

Multiply the price per square foot by the width of the material in feet. A 6-inch strip is 0.5 ft wide, so 3.00 per sq ft is 1.50 per linear foot.

Should I add extra for waste?

Usually yes. A common allowance is about 10% extra for off-cuts, though the right amount depends on your project. The calculator does not add it, so enter the longer length yourself.

Mark Danny

Mark Danny

Mark Danny builds and maintains the free calculators and guides on Area of Irregular Shapes Calculator. Every calculator page explains its formula and shows a worked example, so you can check the working yourself. Spotted a mistake or have a suggestion? Email gulsher.hingoro101@gmail.com.

Articles: 579