This price elasticity calculator measures how strongly demand reacts to a price change. Enter two prices and the quantities demanded at each, and it returns the elasticity using the midpoint method, along with a note on whether demand is elastic or inelastic.
Price Elasticity Calculator
Price elasticity of demand between two price/quantity points, using the midpoint (arc elasticity) method.
Starting values: the calculator opens with the price rising from 10 to 12 and the quantity demanded falling from 100 to 85. The elasticity is −0.8919, and demand is labelled inelastic.
The midpoint formula
E = [(Q2 − Q1) ÷ ((Q1 + Q2) ÷ 2)] ÷ [(P2 − P1) ÷ ((P1 + P2) ÷ 2)]
Where:
- P1 and P2 = the initial and new price
- Q1 and Q2 = the initial and new quantity demanded
- The top part is the percentage change in quantity, measured against the average quantity
- The bottom part is the percentage change in price, measured against the average price
Price elasticity of demand is the percentage change in quantity divided by the percentage change in price. A finance education site notes that the midpoint method uses the average of the two points as the base for each change. The advantage is that the answer is the same whichever direction you move: going from 10 to 12 gives the same elasticity as going from 12 back to 10.
Reading the result
- The sign is normally negative, since higher prices reduce the quantity demanded. Many texts quote the absolute value.
- Absolute value above 1: elastic. Demand is sensitive, and quantity falls by a larger percentage than price rises.
- Absolute value below 1: inelastic. Demand is not very sensitive, and quantity changes by a smaller percentage than price.
- Absolute value equal to 1: unit elastic.
The calculator’s label has two outcomes only: elastic when the absolute value is above 1, and inelastic otherwise. That means a value of exactly 1 is shown as inelastic, although in economics it is called unit elastic. If you get a result of exactly 1 or very close to it, read it as unit elastic.
Worked examples
Example 1: the default (inelastic)
- Change in quantity = 85 − 100 = −15. Average quantity = 92.5. Percentage change = −15 ÷ 92.5 = −0.1622.
- Change in price = 12 − 10 = 2. Average price = 11. Percentage change = 2 ÷ 11 = 0.1818.
- E = −0.1622 ÷ 0.1818 = −0.8919.
Quantity fell about 16.2 percent while price rose about 18.2 percent, so demand is inelastic. Revenue goes from 10 × 100 = 1,000 to 12 × 85 = 1,020, so the higher price raised revenue.
Example 2: elastic demand
The price falls from 20 to 18 and the quantity rises from 50 to 70. Quantity change = 20 ÷ 60 = 0.3333. Price change = −2 ÷ 19 = −0.1053. E = 0.3333 ÷ (−0.1053) = −3.17. The absolute value is above 1, so demand is elastic. Revenue rises from 1,000 to 1,260 when the price is cut.
Example 3: another inelastic case
Price goes from 5 to 6 and quantity from 200 to 190. Quantity change = −10 ÷ 195 = −0.0513. Price change = 1 ÷ 5.5 = 0.1818. E = −0.282. Demand is inelastic, which is typical of goods people buy regardless of price.
Why elasticity matters for pricing
If demand is elastic, a price rise lowers total revenue, because quantity falls proportionally more than price rises. If demand is inelastic, a price rise increases revenue, as Example 1 showed. This is why businesses with inelastic products can raise prices with less fear of losing sales, and why businesses with elastic products tend to compete on price. The revenue effect is only part of the picture, since cost changes with quantity too.
Limits of a two-point estimate
- Elasticity is measured between two points. It can differ at other prices along the same demand curve.
- Other factors, such as seasonality or a competitor’s move, may have changed demand at the same time as your price. The calculation assumes the price change alone caused the quantity change.
- The result describes the range between your two prices and should not be extended far beyond it.
Elastic and inelastic goods in everyday terms
Demand tends to be inelastic when there are few substitutes, when the item is a necessity, or when it takes up a small share of a budget. It tends to be elastic when there are close substitutes, when the item is a luxury, or when buyers can easily postpone the purchase. These are tendencies, not rules, and the only reliable check is to measure the effect of an actual price change on quantity.
Checking your result against revenue
A useful cross-check compares revenue before and after the change. If E is inelastic (between 0 and −1), revenue rises with a price rise. If it is elastic (below −1), revenue falls. In Example 2, the price fell and revenue rose from 1,000 to 1,260, consistent with an elasticity of about −3.17. If your revenue moves the opposite way from what the elasticity suggests, recheck the four numbers you entered, especially the order of the quantities.
Entering the data correctly
- Enter price and quantity from the same two situations: initial price with initial quantity, new price with new quantity.
- Use the quantity demanded, which is the amount customers wanted at that price, not stock or production.
- Keep units the same on both sides, such as units per week.
- All four values must be above zero.
Frequently asked questions
What is the midpoint method?
It measures each percentage change against the average of the two values rather than the starting value. This gives the same elasticity whether the price rises or falls between the same two points.
Why is the elasticity negative?
Demand normally falls when price rises, so the percentage changes have opposite signs. Many texts report the absolute value, and the calculator’s elastic or inelastic label uses it.
What does it mean if demand is elastic?
The quantity demanded changes by a larger percentage than the price. A price rise tends to reduce total revenue, and a price cut tends to increase it.
How does the calculator treat a value of exactly 1?
It labels it inelastic, because the label only checks whether the absolute value is above 1. Economists call exactly 1 unit elastic.
