This damage per second calculator turns a weapon’s damage and attack interval into DPS, and can include critical hits. Enter the damage per hit and the time between hits, then add a crit chance and crit multiplier to see the average.
Damage Per Second Calculator
Damage-per-second (DPS) output for a game weapon or ability, from base damage, attack speed, and (optionally) critical hit chance.
Starting values: both modes open with 120 damage per hit and 1.2 seconds between hits. The simple mode gives 100.00 DPS. The critical hit mode adds a 25 percent crit chance and a 2× multiplier, which gives an average damage per hit of 150 and a DPS of 125.00.
The formulas
DPS = Damage per Hit ÷ Time Between Hits
Average Damage per Hit = Base Damage × (1 + Crit Chance × (Crit Multiplier − 1))
DPS with crits = Average Damage per Hit ÷ Time Between Hits
Where:
- Damage per Hit = the damage of one successful hit
- Time Between Hits = seconds from one hit to the next. If your weapon attacks 1.25 times per second, the interval is 1 ÷ 1.25 = 0.8 seconds
- Crit Chance = the probability a hit is critical, as a decimal in the formula (25 percent is 0.25)
- Crit Multiplier = how many times the base damage a critical hit does
The crit formula works by averaging. A normal hit does the base damage. A critical hit does the base damage times the multiplier, which is an extra (multiplier − 1) times the base. Weighting that extra by the crit chance gives the average gain per hit.
Where the crit formula comes from
With crit chance c and multiplier M, the average damage is (1 − c) × base + c × M × base. Expand it: base × (1 − c + cM) = base × (1 + c(M − 1)). This is the same expression the calculator uses. It is the expected value, a long-run average, and individual fights will vary around it.
Worked examples
Example 1: the simple default
120 ÷ 1.2 = 100 DPS.
Example 2: the default with crits
- Crit bonus per hit = 0.25 × (2 − 1) = 0.25.
- Average damage = 120 × 1.25 = 150.
- DPS = 150 ÷ 1.2 = 125.00.
The crits are worth 25 extra DPS over the simple figure.
Example 3: a faster weapon
A weapon does 80 damage every 0.8 seconds, with a 40 percent crit chance and a 1.5× multiplier. Average damage = 80 × (1 + 0.4 × 0.5) = 80 × 1.2 = 96. DPS = 96 ÷ 0.8 = 120.
Example 4: comparing two weapons
Weapon A hits for 200 every 2.0 seconds, so DPS = 100. Weapon B hits for 60 every 0.5 seconds, so DPS = 120. B has the higher sustained DPS even though A hits harder. If A had a 50 percent crit chance with a 2× multiplier, its average damage would be 200 × 1.5 = 300 and its DPS would be 150, which beats B. Crit settings can change the ranking.
What the calculator does not include
DPS in a game is rarely this simple, and the tool covers only the core arithmetic. A game-guide source on damage calculations describes several other factors that shape the real figure: modifiers that may add together rather than multiply, a crit chance that usually cannot exceed 100 percent, and the way hit rate, uptime and enemy mitigation reduce the damage you actually deal. None of those are modelled here.
- Hit chance: if attacks can miss, multiply the DPS by the chance to hit.
- Uptime: if you cannot attack all the time because of movement or cooldowns, scale by the share of time you do attack.
- Enemy defence or resistance: the damage per hit you enter should already account for it.
- Stacking rules: check whether your game adds damage bonuses together or multiplies them, because the two give different totals.
Each game defines these differently, so use the game’s own documentation for the exact rules and enter the final damage per hit that the game shows.
Practical tips
- Compare weapons with the same assumptions, so that the differences you see are real.
- Keep the crit chance at 100 percent or below. A chance above 100 percent has no meaning in a game where it is capped.
- For a burst of damage over a short window, DPS is less useful than total damage in that window. Multiply DPS by the seconds if the hits arrive evenly.
- Time to kill is the enemy’s health divided by your DPS. An enemy with 1,000 health takes 10 seconds at 100 DPS and 8 seconds at 125 DPS.
Worked scenario: choosing between two upgrades
Suppose you can choose between a sword that adds raw damage and a trinket that adds crit chance. The sword raises damage per hit from 120 to 140 and leaves the interval at 1.2 seconds. The trinket raises the crit chance from 25 to 40 percent and keeps the damage at 120. With the 2× multiplier:
- Sword: 140 × (1 + 0.25) = 175 average, so 175 ÷ 1.2 = 145.83 DPS.
- Trinket: 120 × (1 + 0.40) = 168 average, so 168 ÷ 1.2 = 140.00 DPS.
Here the sword wins by about 5.8 DPS. Run your own numbers, because the answer swings with the multiplier. A bigger crit multiplier makes crit chance more valuable and shifts the balance toward the trinket.
Why the interval matters
Shortening the interval raises DPS in direct proportion. Cutting 1.2 seconds to 1.0 raises the default 100 DPS to 120 DPS, a 20 percent gain, as 1.2 ÷ 1.0 = 1.2. A 20 percent gain in damage per hit gives the same 20 percent gain in DPS. Speed and damage therefore trade off one for one in the simple model, and the crit settings only add a fixed percentage on top.
Frequently asked questions
How do I calculate DPS?
Divide the damage of one hit by the time between hits in seconds. A 120 damage hit every 1.2 seconds is 100 DPS.
How do critical hits change DPS?
They raise the average damage per hit. Multiply the base damage by 1 plus the crit chance times the multiplier minus 1, then divide by the interval.
How do I turn attacks per second into the time between hits?
Divide 1 by the attacks per second. A weapon that attacks 1.25 times each second has 0.8 seconds between hits.
Does this include misses, armour or buffs?
No. It uses only the damage per hit, interval and optional crit settings. Enter a damage figure that already reflects your game’s modifiers, and adjust for hit chance separately.
