Linear Foot and Yard Price Calculator

Fabric, trim, fencing, lumber and similar goods are often priced by length, and different sellers quote different units. This linear foot and yard price calculator converts a price per linear foot to a price per linear yard, or a price per yard back to a price per foot. It has two modes, one for each direction, and the starting values are $2 per foot and $6 per yard.

Linear & Yard Measure Calculators

Linear Foot And Yard Price Calculator

Convert a price per linear foot to a price per linear yard, or the reverse.

$

How do you convert price per linear foot to price per yard?

Multiply the price per foot by 3, because a yard is 3 feet.

Price per yard = Price per foot × 3

To go the other way, divide the price per yard by 3:

Price per foot = Price per yard ÷ 3

Worked examples

Worked example: foot to yard

A trim priced at $2 per linear foot:

Price per yard = 2 × 3 = $6

Worked example: yard to foot

A fabric priced at $6 per linear yard:

Price per foot = 6 ÷ 3 = $2

Worked example: a price with cents

A ribbon at $0.85 per linear foot:

Price per yard = 0.85 × 3 = $2.55

The conversion in a table

The table shows common prices per linear foot and the matching price per linear yard.

Price per foot Price per yard
$1.00 $3.00
$2.00 $6.00
$3.50 $10.50
$5.00 $15.00

What a linear foot is

A linear foot is a length of one foot, measured in a straight line, regardless of width or thickness. It is different from a square foot, which measures area. A board sold at $4 per linear foot costs $4 for each foot of its length, whether it is narrow or wide.

What a linear yard is

A linear yard is a length of three feet, or 36 inches. Fabric shops often sell by the yard, with the width set by the bolt, for example 54 inches wide. Because the width is fixed, a yard is a fair way to compare one bolt with another of the same width.

Comparing prices when the width differs

A price per linear foot or yard ignores width, so a wider material gives you more for the same length. To compare fairly, convert to price per square foot by dividing by the width in feet:

Price per ft² = Price per linear foot ÷ Width in feet

For fabric at $9 per linear yard that is 54 in wide, the width is 54 ÷ 12 = 4.5 ft. The price per linear foot is 9 ÷ 3 = $3, so:

Price per ft² = 3 ÷ 4.5 = $0.67

The same fabric at $8 per yard but only 36 in (3 ft) wide:

Price per linear foot = 8 ÷ 3 = $2.67
Price per ft² = 2.67 ÷ 3 = $0.89

The cheaper yard price is the more expensive fabric per square foot.

Working out the cost of a project

Multiply the price per foot by the length you need. For 12 ft of $2 per foot trim, the total is $24. In yards, 12 ft is 4 yd, and 4 × $6 = $24, the same answer. Always buy a little extra for cuts and mistakes if the material allows it.

What the linear foot and yard price calculator does not do

It converts between feet and yards only. It does not convert to metres, work out price per square foot, or add tax, shipping or waste. For metres, divide the price per yard by 0.9144, since a yard is 0.9144 metres. A $6 yard price is about $6.56 per metre.

How do you convert to price per metre?

A yard is 0.9144 metres and a foot is 0.3048 metres. Divide the price per yard by 0.9144, or the price per foot by 0.3048:

Price per metre = Price per yard ÷ 0.9144
Price per metre = Price per foot ÷ 0.3048
Price per yard Price per foot Price per metre
$6.00 $2.00 $6.56
$9.00 $3.00 $9.84
$12.00 $4.00 $13.12

Worked example: pricing a fence trim run

You need 30 ft of trim at $2.40 per linear foot:

Total = 30 × 2.40 = $72
Price per yard = 2.40 × 3 = $7.20
Length in yards = 30 ÷ 3 = 10 yd
Total = 10 × 7.20 = $72

The two routes agree, which is a quick way to check you used the right unit.

Mistakes to avoid when comparing prices

  • Mixing up a linear yard with a square yard. A linear yard is a length of 3 feet. A square yard is an area of 9 square feet.
  • Ignoring width. Two fabrics at the same price per yard are not equal if one is wider.
  • Forgetting waste. Cuts, matching patterns and mistakes mean you may need more than the exact length.
  • Leaving out tax, shipping and cutting fees, which the calculator does not include.

Worked example: allowing for waste

If your project needs 12 ft and you decide to buy 2 ft extra, you pay for 14 ft. At $2 per foot that is 14 × 2 = $28 instead of $24. Decide on the allowance from the material and the cuts you plan to make.

Converting a linear yard price to a square yard price

A square yard is 9 square feet, so a price per linear yard only becomes a price per area once you divide by the width in yards.

Price per square yard = Price per linear yard ÷ Width in yards

For the fabric at $9 per linear yard that is 54 in wide, the width is 54 ÷ 36 = 1.5 yd, so the price is 9 ÷ 1.5 = $6 per square yard. Dividing by 9 gives 6 ÷ 9 = $0.67 per ft², the same as the earlier figure.

Width Width in yards Price per square yard at $9 per linear yard
36 in 1 $9.00
54 in 1.5 $6.00
72 in 2 $4.50

The wider material is cheaper by area even though all three are $9 a linear yard. That is the same width effect as before, shown in square yards.

Metric prices and mixed units

Some sellers quote per metre, so convert with the exact definitions: a yard is 0.9144 m and a foot is 0.3048 m.

Price per metre to price per yard and foot

Multiply the price per metre by 0.9144 for the price per yard, or by 0.3048 for the price per foot. A material at $10 per metre costs 10 × 0.9144 = $9.14 per yard and 10 × 0.3048 = $3.05 per foot. These figures use the same currency, so apply any exchange rate before converting.

Comparing a roll price with a cut price

A seller offers a roll at $8 per yard and a cut length at $3 per foot. The roll is 8 ÷ 3 = $2.67 per foot, which is $0.33 per foot cheaper. On 30 ft that saves about 30 × 0.33 = $10, if you need the whole length and the roll has no minimum.

Where published sources stop

The pages that rank for this topic are mostly short unit converters, and none that I opened gave sourced prices for any material. That is why this calculator stays with conversions, which follow from the definitions of the units, and leaves prices to your own quote. Add tax, shipping and cutting fees yourself, because they differ by seller.

Frequently asked questions

How many feet are in a yard?

A yard is 3 feet, or 36 inches, and is 0.9144 metres exactly.

How do I convert price per foot to price per yard?

Multiply by 3. A trim at $2 per foot costs $6 per yard.

How do I convert price per yard to price per foot?

Divide by 3. A fabric at $6 per yard costs $2 per foot.

How do I convert a linear yard price to a square yard price?

Divide by the width in yards. At $9 per linear yard and 54 in wide, 9 ÷ 1.5 = $6 per square yard.

How do I convert price per metre to price per yard?

Multiply by 0.9144. A price of $10 per metre is $9.14 per yard and $3.05 per foot.

Is a linear foot the same as a square foot?

No. A linear foot is a length. A square foot is an area, and you need the width to convert between them.

Mark Danny

Mark Danny

Mark Danny builds and maintains the free calculators and guides on Area of Irregular Shapes Calculator. Every calculator page explains its formula and shows a worked example, so you can check the working yourself. Spotted a mistake or have a suggestion? Email gulsher.hingoro101@gmail.com.

Articles: 559