Water Heater Sizing Calculator: Tank Size by Household

Picking a storage tank water heater starts with how much hot water your household needs in its busiest hour. This water heater sizing calculator multiplies the number of occupants by the peak-hour hot water each person uses, in gallons, and returns a recommended tank size. It starts with 4 people at 15 gallons each, which are placeholders, so replace the 15 with a figure for your own household.

Heating & Cooling Sizing Calculators

Water Heater Sizing Calculator

Recommended storage-tank water heater size (gallons) for a household, from occupants and peak-hour usage — see the Tankless Water Heater Sizing Calculator for tankless units.

How do you size a water heater?

Multiply the occupants by the peak-hour usage per person. The result is the gallons of hot water your household might draw in its busiest hour, and each variable is explained under the formula.

Recommended tank size (gal) = Occupants × Peak-hour usage per person (gal)

Worked examples

Worked example: the starting values

Size = 4 × 15 = 60 gallons

Worked example: a couple

Two people at 15 gallons each:

Size = 2 × 15 = 30 gallons

Worked example: a large household with heavy use

Six people at 20 gallons each:

Size = 6 × 20 = 120 gallons

At 15 gallons per person, each extra occupant adds 15 gallons:

Occupants Recommended size
1 15 gallons
2 30 gallons
3 45 gallons
4 60 gallons
5 75 gallons
6 90 gallons

For 4 people, the usage per person matters as well:

Peak-hour use per person Recommended size
10 gallons 40 gallons
15 gallons 60 gallons
20 gallons 80 gallons
25 gallons 100 gallons

Finding your peak-hour usage

Peak-hour demand is the hot water your household uses in its busiest single hour, often a morning when several people shower. The U.S. Department of Energy’s guide to sizing a water heater suggests listing what you use in that hour. Its worksheet gives average amounts per use, including about 20 gallons for a shower, 2 for shaving, 3 for hand dishwashing, 7 for an automatic dishwasher and 25 for a top-loading clothes washer.

Worked example: from a morning routine to usage per person

In one morning hour a family of 4 takes three showers, one person shaves and someone washes dishes by hand:

Peak hour = 3 × 20 + 2 + 3 = 65 gallons
Per person = 65 ÷ 4 = 16.25 gallons

Enter 16.25 as the usage per person and the calculator gives 4 × 16.25 = 65 gallons, matching the peak hour you measured.

Tank size and first hour rating

The Department of Energy says the first hour rating is the gallons of hot water a heater can supply in one hour starting with a full tank, and that you should pick a model whose rating is at least your peak-hour demand. The rating depends on the tank and the heat source, so it can be higher than the tank size. The calculator gives a size in gallons. When you shop, compare your peak-hour figure with the first hour rating on the label.

What the water heater sizing calculator leaves out

It is a one-step estimate. It does not use the fuel type, the recovery rate, the incoming water temperature, the number of bathrooms or any change in your household later. Heaters are made in set sizes, so you will usually round to the nearest available size above the result. For a tankless heater, use a tankless sizing method instead, since a tankless heater is sized by flow and not by tank volume.

Hot water used by common tasks

The Department of Energy’s worksheet lists average gallons for common uses. Use them to build your own peak hour.

Use Average gallons
Shower 20
Shaving 2
Hand dishwashing or food preparation 3
Automatic dishwasher 7
Clothes washer, top-loading 25
Clothes washer, horizontal-axis 15

Worked example: an evening peak for three people

In one evening hour, two people shower, the dishwasher runs and a top-loading washer runs:

Peak hour = 2 × 20 + 7 + 25 = 72 gallons
Per person = 72 ÷ 3 = 24 gallons
Recommended size = 3 × 24 = 72 gallons

With a horizontal-axis washer instead, the peak hour would be 2 × 20 + 7 + 15 = 62 gallons. A household can lower its peak by spreading uses across the day, for example by running the washer at a different time.

Planning for a changing household

Each extra occupant adds one more share of peak-hour use. At 15 gallons per person, moving from 4 to 5 people takes the result from 60 to 75 gallons. If you expect the household to grow, enter the larger number of occupants now.

Picking a heater from the result

Heaters come in set sizes, so find models near your result and compare their first hour ratings with your peak hour. A model with a rating at or above your peak-hour demand should cover your busiest hour, according to the Department of Energy’s guide. Ask a plumber or supplier about the fuel type and the space available.

Frequently asked questions

What is peak-hour usage?

It is the hot water your household uses in its busiest single hour. The Department of Energy suggests totalling the gallons for each use in that hour, such as 20 for a shower and 7 for a dishwasher cycle.

Is tank size the same as first hour rating?

No. The first hour rating is the gallons a heater can supply in an hour starting with a full tank, so it can exceed the tank size. Pick a model whose rating is at least your peak-hour demand.

Can I enter litres?

Yes. The usage box converts other volume units, and the recommended size is in gallons.

Mark Danny

Mark Danny

Mark Danny builds and maintains the free calculators and guides on Area of Irregular Shapes Calculator. Every calculator page explains its formula and shows a worked example, so you can check the working yourself. Spotted a mistake or have a suggestion? Email gulsher.hingoro101@gmail.com.

Articles: 559