The stain a fence needs depends on how much surface you are covering and how far a gallon spreads. This fence stain calculator works out the surface area from the fence length, height and whether you stain one side or both, then divides by the coverage per gallon on the can to give the gallons needed. It starts with a 150 ft fence, 6 ft high, both sides and 150 ft² per gallon.
Fence Stain Calculator
Stain needed for a wood fence from length, height and coverage rate, both sides or one side.
How do you calculate how much stain a fence needs?
Multiply length by height for one side, double it if you stain both sides, and divide by the coverage per gallon.
Area = Length × Height × Number of sides
Gallons = Area ÷ Coverage per gallon
Where:
- Length and Height = the fence dimensions in feet
- Number of sides = 1 or 2
- Coverage per gallon = the square feet one gallon covers, from the can’s label
Worked examples
Worked example: the calculator’s starting values
A 150 ft fence, 6 ft high, both sides, with 150 ft² per gallon:
Area = 150 × 6 × 2 = 1,800 ft²
Gallons = 1,800 ÷ 150 = 12 gallons
Worked example: one side only
A 100 ft fence, 5 ft high, one side, with 200 ft² per gallon:
Area = 100 × 5 × 1 = 500 ft²
Gallons = 500 ÷ 200 = 2.5 gallons
Worked example: a lower coverage rate
An 80 ft fence, 6 ft high, both sides, on rough wood that gets only 120 ft² per gallon:
Area = 80 × 6 × 2 = 960 ft²
Gallons = 960 ÷ 120 = 8 gallons
Coverage and gallons compared
The table uses a 1,800 ft² area from the starting example.
| Coverage per gallon | Gallons |
|---|---|
| 100 ft² | 18 |
| 150 ft² | 12 |
| 200 ft² | 9 |
| 250 ft² | 7.2 |
A small change in coverage makes a large difference to the quantity, so use the figure from the can you intend to buy.
Where do you find the coverage rate?
It is printed on the product label or data sheet, usually as a range in square feet per gallon. Pick the number for the surface you have. Rough, dry or weathered wood usually takes more stain than smooth, sealed wood, so a rough fence calls for the lower end of the range. The label may give a different figure for a first coat and a second.
What the fence stain calculator assumes
It treats the fence as a solid surface of length times height. A picket or slatted fence has gaps, but you also stain the edges of each board, so the true area can differ from the simple formula. The calculator does not adjust for this, nor for posts, rails, gates or caps.
Second coats and extra stain
The calculator does not include a second coat. It gives gallons for one coat at the coverage rate you enter. For two coats, either double the result or use a coverage figure that covers both coats, depending on your product. Follow the label.
Buying extra stain
The calculator does not round up or add a margin. Stain is sold in set can sizes, so round the result up to the next can size, and think about a small reserve for touch-ups and spills.
Fence length and stain compared
For a 6 ft fence, stained on both sides at 150 ft² per gallon:
| Fence length | Area | Gallons |
|---|---|---|
| 50 ft | 600 ft² | 4 |
| 100 ft | 1,200 ft² | 8 |
| 150 ft | 1,800 ft² | 12 |
| 200 ft | 2,400 ft² | 16 |
Staining one side instead of both
One side halves the area. The 150 ft fence at 6 ft high needs 150 × 6 × 1 = 900 ft², and 900 ÷ 150 = 6 gallons, against 12 gallons for both sides.
Worked example: rounding up to whole gallons
A 120 ft fence, 4 ft high, one side, with 175 ft² per gallon:
Area = 120 × 4 × 1 = 480 ft²
Gallons = 480 ÷ 175 = 2.74 gallons
You cannot buy 2.74 gallons, so round up to 3 gallons, or to the next can size you can buy.
Measuring a fence with several runs
Add the length of each straight run. If the height changes, work out each part separately and add the areas before you divide.
Worked example: two heights
A 60 ft run that is 6 ft high and a 30 ft run that is 4 ft high, both sides, 150 ft² per gallon:
Area = (60 × 6 + 30 × 4) × 2 = (360 + 120) × 2 = 960 ft²
Gallons = 960 ÷ 150 = 6.4 gallons
The calculator takes one length and one height, so enter a length and height that give the same area, or run it twice and add the gallons.
Stain cost and coats
Gallons only turn into a budget once you add the price and the number of coats.
Frequently asked questions
Do I stain both sides of the fence?
Usually, if you want both sides protected. Choose both sides in the calculator to double the area.
