Estimate the dehumidifier capacity you need, in pints per day, from the area of the room or basement and how damp it is.
Dehumidifier Size Calculator
Recommended dehumidifier capacity (pints/day) for a room or basement, from area and how damp the space is.
Starting values: a space of 1,000 ft² that is very damp. The calculator gives 40 pints per day.
How the calculator works
Capacity (pints per day) = area in ft² × dampness factor
The dampness factor is chosen from three levels:
- Moderately damp: 0.03
- Very damp: 0.04
- Wet, or a history of standing water: 0.05
The area input has a unit selector, so you can enter square metres. The calculator uses the area and the dampness level only, and it does not use the ceiling height, the temperature or the number of people.
Worked examples
One space, three dampness levels
For 1,000 ft²:
- Moderately damp: 1,000 × 0.03 = 30 pints per day.
- Very damp: 1,000 × 0.04 = 40 pints per day.
- Wet: 1,000 × 0.05 = 50 pints per day.
A smaller room
A bedroom or den of 500 ft² that is very damp needs 500 × 0.04 = 20 pints per day.
A larger space
A basement of 2,000 ft² that is very damp needs 2,000 × 0.04 = 80 pints per day. A space that large may be better served by a whole-home unit or by more than one dehumidifier.
The rating on the label has changed
Capacity is the amount of water a unit removes in 24 hours under set test conditions. A government test guide explains that since 2019 the test for portable units is run at 65°F, a cooler room like a basement, and no longer at 80°F. Cooler air holds less water, so the same unit now has a lower rating. Examples of the old and new ratings of portable units are 30 pints now 20, 40 now 25, 50 now 30 and 70 now 40 to 45. Whole-home units fall by a smaller amount, for example 100 now 85.
The calculator does not say which rating basis its factors assume. Treat its result as an estimate, and compare it with the current rating printed on the unit you are considering. If you are replacing an old unit, the lower new rating may still do the job.
What the area method leaves out
A sizing guide gives ranges by type of room, which are more varied than a single factor. It gives about 20 to 35 pints per day for a slightly damp main-floor bedroom, rising to 30 to 50 if the doors stay open to a larger area, and about 50 to 70 for a very damp finished basement, especially if you aim for about 45 percent humidity. The same guide lists other factors:
- Moisture sources: showers, cooking, indoor laundry, a poorly vented dryer and stored wood add load and can push you up a size.
- Temperature: cool air lowers how much water a unit removes, so cool spaces need more capacity.
- Air mixing: open doors and connected floor plans increase the area that you are drying.
- Air leaks: humid outdoor air that enters through gaps adds moisture.
Too small or too large
An undersized unit leaves the air sticky and runs all the time. An oversized unit wastes money on capacity you do not need. The guide advises staying near the baseline if you are close to your target humidity and only need to hold it. The guide also notes that the claimed area on a label is not a reliable guide, since one 50-pint unit is rated for 4,500 ft² and one 70-pint unit for 1,000 ft².
Using the result
Use the calculator as a first number. Then adjust it for the moisture sources, the temperature and the layout of your space, and compare it with the ratings of real units. For other comfort sizing, see the mini split calculator, the swamp cooler size calculator and the room volume calculator.
Getting the most from the unit
A dehumidifier treats the air that mixes with it, so its capacity applies to the space it can reach. Keep the doors of the room open if you want to dry the connected rooms, and closed if you want to concentrate on one room. Empty the bucket or connect a drain hose, since a full bucket stops the unit. Find the source of the moisture too. A leak, a poorly vented dryer or a damp wall adds water faster than any machine removes it, and fixing the source can lower the capacity you need.
Checking the result
After a week of use, check the humidity with a meter. If the humidity is still above your target and the unit runs all the time, the capacity is too small. If the room is dry quickly and the unit cycles off for long periods, the capacity is at least enough. Use what you see to decide whether to move up a size.
Frequently asked questions
What size dehumidifier do I need?
Multiply the area in square feet by 0.03, 0.04 or 0.05 for a moderately damp, very damp or wet space. A very damp space of 1,000 ft² needs about 40 pints per day.
Why do new dehumidifiers have lower pint ratings?
Since 2019 the test for portable units is run at 65°F instead of 80°F. Cooler air holds less water, so the same unit has a lower rating, for example 50 pints is now about 30.
What size dehumidifier do I need for a basement?
A sizing guide gives about 50 to 70 pints per day for a very damp finished basement. The calculator gives 40 for 1,000 ft² at the very damp setting, so compare it with the room and the unit rating.
Is a bigger dehumidifier better?
Not always. An oversized unit wastes money on capacity you do not need. Choose a size close to your need, and adjust for moisture sources and temperature.
