Manufactured Home Cost Calculator: Single & Double-Wide Pricing

The total cost of a manufactured home is the floor area times the factory unit price per square foot, plus site work, foundation and delivery, and this manufactured home cost calculator adds them. Enter the floor area, the unit price from your quote and one figure for site work, and it returns an estimated total. The $65 unit price and $15,000 site work it opens with are placeholders, so replace them with quoted numbers.

Mobile & Manufactured Homes Calculators

Manufactured Home Cost Calculator

Total cost of a new manufactured (HUD-code) home from floor area, unit price and site/delivery costs.

Factory unit price before site work.
$

How do you calculate manufactured home cost?

Multiply the floor area by the unit price, then add the site work figure. The single-wide or double-wide menu is a label only and does not change the arithmetic, so the unit price you enter is what drives the result.

Total = Floor area × Unit price + Site work, foundation and delivery

Where:

  • Floor area = square feet of the home
  • Unit price = factory price per square foot, before site work
  • Site work, foundation and delivery = one lump sum from your quotes

Worked examples

Worked example: a double-wide

A 1,200 ft² home at $65 per ft² with $15,000 of site work:

Total = 1,200 × 65 + 15,000 = 78,000 + 15,000 = $93,000

The all-in cost per square foot is 93,000 ÷ 1,200 = $77.50, which is a handy figure for comparing quotes.

Worked example: a smaller single-wide

A 980 ft² home at $60 per ft² with $12,000 of site work:

Total = 980 × 60 + 12,000 = 58,800 + 12,000 = $70,800

What is a manufactured home?

Modular homes are a different category. They are built to the International Residential Code and the same local and state codes as site-built homes, while manufactured homes follow the HUD Code.

What site work includes

The calculator has a single field, so the content of that number is up to your quotes. Ask each dealer or installer which of these items are included.

  • Foundation or pier setup
  • Delivery and placement of the sections
  • Joining the sections on site
  • Utility hookups
  • Permits and inspections
  • Steps, skirting or porches

Two quotes that group these differently cannot be compared until you break them into the same lines.

What the manufactured home cost calculator does not include

The estimate covers the home and site work only. It does not include land, financing costs, taxes or insurance, and it does not add appliances or furnishings unless they are in your unit price. Ask whether appliances are included, since some dealers quote them separately.

Comparing two quotes

Divide each quote’s total by the floor area to get an all-in price per square foot, then check that both quotes cover the same site work and finishes. A cheaper unit price can come with a higher site work figure.

Home size and total cost compared

The table shows three homes at different sizes, each with its own unit price and site work figure. These are example numbers, not market prices:

Floor area Unit price Site work Total All-in per ft²
800 ft² $60 $12,000 $60,000 $75.00
1,200 ft² $65 $15,000 $93,000 $77.50
1,600 ft² $70 $18,000 $130,000 $81.25

Site work and total cost compared

For the 1,200 ft² home at $65 per ft², the home itself is $78,000, and the site work figure moves the total directly:

Site work Total
$8,000 $86,000
$15,000 $93,000
$25,000 $103,000

Worked example: comparing two dealers

Dealer A quotes $62 per ft² with $18,000 of site work. Dealer B quotes $66 per ft² with $12,000. For a 1,200 ft² home:

A = 1,200 × 62 + 18,000 = 74,400 + 18,000 = $92,400
B = 1,200 × 66 + 12,000 = 79,200 + 12,000 = $91,200

Dealer B has the higher unit price but the lower total, which is why the site work line matters as much as the price per square foot.

Questions to ask a dealer about the unit price

Ask which model and floor area the price covers, whether delivery, set-up and appliances are in it, and what the warranty includes. Get the site work as a separate itemised list so you can enter one clear figure in the calculator.

Utilities, land and extras beyond the home

The site work box is one lump sum, so it helps to know what it might need to cover.

Checking the quote line by line

Before you rely on the total, list what each dealer’s site work figure includes and ask for anything that is missing in writing. A common cause of a surprise is an item that was assumed to be in the price but turns out to be extra, such as skirting, steps or the permit fees. Keep the quote and the calculator result side by side so that any difference is easy to explain.

Frequently asked questions

What is the difference between manufactured and modular homes?

Manufactured homes are built to the federal HUD Code. Modular homes are built to the International Residential Code and local codes, like site-built homes.

Does the single-wide or double-wide choice change the price?

No, it is a label. The result depends on the floor area, the unit price and the site work you enter.

Mark Danny

Mark Danny

Mark Danny builds and maintains the free calculators and guides on Area of Irregular Shapes Calculator. Every calculator page explains its formula and shows a worked example, so you can check the working yourself. Spotted a mistake or have a suggestion? Email gulsher.hingoro101@gmail.com.

Articles: 559