Flat Roof Cost Calculator: EPDM, TPO, BUR & Modified Bitumen

Flat roofs are usually priced by area, and the system you choose changes the material price per square foot. This flat roof cost calculator multiplies the roof length and width by the sum of a material price and an installation labour price per square foot. A menu lets you label the system as EPDM rubber, TPO, built-up (BUR) or modified bitumen. It starts with a 40 ft by 30 ft roof, EPDM, $6 for material and $3 for labour. These are placeholders, and the menu does not change the arithmetic, so enter the price you were quoted for your system.

Roofing Calculators

Flat Roof Cost Calculator

Installed cost of a flat roof — built-up (BUR), modified bitumen, EPDM or TPO — from roof area and a chosen material rate.

Example price — replace with your local quote.
Example price — replace with your local quote.

How do you calculate flat roof cost?

Multiply the length by the width for the roof area, then by the material and labour prices together. The total is the roof area times the combined price per square foot.

Roof area = Length × Width
Total = Roof area × (Material price + Labour price)

Where the material price and the labour price are each in dollars per square foot.

Worked examples

Worked example: the starting values

Area = 40 × 30 = 1,200 ft²
Total = 1,200 × (6 + 3) = 1,200 × 9 = $10,800

Worked example: a larger TPO roof

A 50 ft by 40 ft roof with material at $5.50 and labour at $2.50:

Area = 2,000 ft²
Total = 2,000 × (5.50 + 2.50) = 2,000 × 8 = $16,000

Worked example: a built-up roof

A 24 ft by 36 ft roof with material at $7 and labour at $4:

Area = 864 ft²
Total = 864 × (7 + 4) = 864 × 11 = $9,504

Worked example: a modified bitumen roof

A 30 ft by 30 ft roof with material at $6.50 and labour at $3.50:

Area = 900 ft²
Total = 900 × (6.50 + 3.50) = 900 × 10 = $9,000

Roof size and total cost compared

At the $9 combined starting rate:

Roof area Total
600 ft² $5,400
1,200 ft² $10,800
2,000 ft² $18,000
3,000 ft² $27,000

What the roofing system menu does

The menu has four choices, EPDM rubber, TPO, built-up (BUR) and modified bitumen. It labels the system but does not change the material price or the formula. If you switch from EPDM to TPO, the total stays the same until you type a different material price. To compare systems, enter each system’s quoted price. For a 1,200 ft² roof with $3 labour, the material price alone moves the total like this:

Material price Total
$5 $9,600
$6 $10,800
$7 $12,000
$8 $13,200

The four flat roof systems

These are general descriptions, so ask your roofer how they build each one.

EPDM rubber

A synthetic rubber single-ply membrane laid over the roof in sheets.

TPO

A thermoplastic single-ply membrane whose seams are usually welded. The TPO roofing cost calculator on this site adds a separate insulation line.

Built-up roofing (BUR)

Layers of bitumen and reinforcing fabric built up on the roof, topped with a surface layer.

Modified bitumen

Asphalt-based sheets with added modifiers, installed in one or more layers.

Measuring a flat roof

Multiply the length by the width. For an L-shaped roof, split it into rectangles and add their areas, then enter an equivalent length and width. The calculator uses the footprint, so it does not add extra area for parapet walls, curbs, skylights or flashing. Ask your roofer how they measure those and add them by hand.

What the flat roof cost calculator leaves out

It does not add tear-off of the old roof, insulation, deck repairs, drains, edge metal, flashing or permits unless you build them into the two prices. Ask what the quoted prices cover.

Comparing flat roof quotes

Ask for the area, the system, the thickness or number of layers, what is included and the warranty. Divide each total by the area to compare prices per square foot, and check that every quote covers the same scope.

Worked examples

Worked example: comparing two quotes

For the 1,200 ft² starting roof, Quote A is EPDM at $6.50 for material and $3.00 for labour. Quote B is TPO at $5.80 and $3.40:

A = 1,200 × (6.50 + 3.00) = 1,200 × 9.50 = $11,400
B = 1,200 × (5.80 + 3.40) = 1,200 × 9.20 = $11,040

Worked example: including tear-off in the labour price

The calculator has no tear-off line. If your roofer charges $1.50 per ft² to remove the old roof, add it to the labour box, so $3.00 becomes $4.50:

Total = 1,200 × (6 + 4.50) = 1,200 × 10.50 = $12,600

Labour, tear-off and permits

These three items decide how far a total moves from the material price alone.

Frequently asked questions

Does the roofing system menu change the price?

No. The menu is a label, so enter the material price quoted for the system you chose.

Mark Danny

Mark Danny

Mark Danny builds and maintains the free calculators and guides on Area of Irregular Shapes Calculator. Every calculator page explains its formula and shows a worked example, so you can check the working yourself. Spotted a mistake or have a suggestion? Email gulsher.hingoro101@gmail.com.

Articles: 559