Wall Construction Cost Calculator – Per Square Foot or Linear Foot

Estimate the cost of building a wall from its area and a price per square foot, or from its length and a price per linear foot, with extras added. Replace the starting prices with your own quotes.

Wall Calculators

Wall Construction Cost Calculator

Estimate the cost to build or install a wall from its area and a cost per square foot, or per linear foot.

Example price — replace with your local quote.
$

Starting values: a wall 20 ft long and 8 ft high at 25 per square foot with no extras. The wall area is 160 ft² and the estimate is 4,000. The second mode prices a wall by length, at 60 per linear foot.

How the cost is calculated

Per square foot: total = length × height × cost per area + extras

Per linear foot: total = length × cost per length + extras

Where the cost per area or per length is the price you enter, for the whole wall including materials and labour, and the extras are other costs you add, such as footings, drainage, permits or finishing. The prices in the calculator are starting values, and the note says to replace them with a local quote. They are not market prices. Every input has a unit selector, so you can use metres and a price per square metre if you prefer.

Worked examples

Priced by area

A wall 20 ft by 8 ft is 160 ft². At 25 per square foot, the cost is 160 × 25 = 4,000, which is 200 per linear foot of wall, since 25 × 8 = 200.

A larger wall with extras

A wall 30 ft long and 9 ft high at 32 per square foot, with 800 for a footing and permit. The area is 270 ft², so 270 × 32 = 8,640, and adding 800 gives 9,440.

Priced by length

A wall 45 ft long at 85 per linear foot with 500 of extras: 45 × 85 = 3,825, plus 500 gives 4,325.

Switching between the two

A price per linear foot depends on the height of the wall, because a taller wall costs more per foot of length. The two are related by cost per linear foot = cost per square foot × height. So a wall priced at 25 per ft² and 8 ft high is 200 per linear foot, and the starting 60 per linear foot in the second mode is a separate placeholder and not the same wall. If you have a quote in one form, use that mode, and do not mix a per-length price with a different height.

Where to get the price

The cost per area depends on the type of wall, the materials, the height, the access, the labour rates and the local market, so there is no single figure that fits every wall. Get a price from a contractor for the kind of wall you plan, or use your own costs from a similar job. For a specific wall type, you can build up the cost from its parts instead, with the calculators below.

Check the wall area

If the wall has doors or windows, the area to price may be smaller or may be priced differently. Use the wall area calculator to find the net area, then enter it as the length and height, or ask the contractor how they measure.

What to put in the extras

The extras box is for anything outside the per-area price. Common items include the footing or foundation, excavation, drainage, delivery, permits, engineering, equipment, finishing and removal of waste. Add up each from a quote, and then enter the total. If your price per area already includes some of these, leave them out of the extras so that you do not count them twice.

Comparing quotes

To compare two quotes for the same wall, divide each total by the wall area to get a price per square foot, then compare what each includes. A lower total can leave out items that another quote includes, so ask what is covered before you decide.

Testing the sensitivity

A metric example

A wall 12 m long and 2.7 m high has an area of 32.4 m². At 150 per square metre the cost is 32.4 × 150 = 4,860. Choose the unit selector for the price per area so that the price and the area use the same system.

How much does the price matter?

On the 160 ft² starting wall, a change of 5 in the cost per square foot moves the total by 160 × 5 = 800. A wall is often quoted as a range, so try a low and a high price to see the spread before you decide on a budget.

Openings

The area mode multiplies the length by the height and does not subtract doors or windows. If your price is for the net wall area, take the openings off first with the wall area calculator and enter the net area as an equivalent length and height.

Frequently asked questions

How much does it cost to build a wall?

It depends on the type of wall and your local prices. The calculator multiplies the wall area by your cost per square foot and adds extras. At 25 per square foot, a wall 20 ft by 8 ft costs 4,000.

How do I convert cost per square foot to cost per linear foot?

Multiply by the wall height. A wall at 25 per square foot and 8 ft high costs 200 per linear foot.

Are the starting prices real market prices?

No. They are placeholders in the calculator, and the note says to replace them with a local quote.

What should I include in the extras?

Costs that are not in your price per area, such as the footing, drainage, permits, delivery and finishing. Do not repeat anything already in the price.

Mark Danny

Mark Danny

Mark Danny builds and maintains the free calculators and guides on Area of Irregular Shapes Calculator. Every calculator page explains its formula and shows a worked example, so you can check the working yourself. Spotted a mistake or have a suggestion? Email gulsher.hingoro101@gmail.com.

Articles: 559