The Floor Area Calculator calculates the square footage of a floor by multiplying its length by its width.
Floor Area Calculator
Floor square footage for rectangular and L-shaped floors, in feet and inches or metres.
You can enter measurements in feet and inches (for example 15 ft 6 in × 12 ft 3 in) and the calculator converts them before multiplying. It shows the result in square feet, square meters and square yards, and has an L-shaped mode that adds two rectangular sections.
Formula
- Rectangle: A = L × W
- Feet and inches: A = (ft₁ + in₁ ÷ 12) × (ft₂ + in₂ ÷ 12)
- L-shape: A = L₁ × W₁ + L₂ × W₂ (non-overlapping sections)
How the Calculation Works
Step 1: Convert inches to decimal feet by dividing by 12.
Step 2: Multiply length by width.
Step 3: For an L-shaped floor, split it into two rectangles that don’t overlap and add them.
Variables Explained
| Input | Meaning |
|---|---|
| Length, width | Wall-to-wall room dimensions |
| Section 1 and 2 | The two rectangles that make up an L-shaped floor |
Example Calculation
Feet and inches
Given: 15 ft 6 in × 12 ft 3 in
Decimal: 15.5 ft × 12.25 ft
Result: A = 189.875 ft² (≈ 17.64 m²)
L-shaped floor
Given: 15 × 12 ft main section and an 8 × 6 ft alcove
Result: 180 + 48 = 228 ft²
Common Area Conversion Table
| Unit | Equivalent |
|---|---|
| 1 m² | 10.7639 ft² |
| 1 yd² | 9 ft² |
| 1 ft² | 0.0929 m² |
| 6 in | 0.5 ft |
| 3 in | 0.25 ft |
Dimensions Explained
Measuring a room
Measure wall to wall at floor level, at the widest points. Include closets and alcoves if the flooring will go into them.
Irregular rooms
For rooms with angled walls or curves, use the Odd-Shaped Room Square Footage Calculator or split the room into shapes you can measure.
Material Estimation Notes
Floor area is the starting point for flooring, but you usually buy more to cover cuts and waste. Use the Floor, Tile, Laminate or Vinyl calculators to turn area into boxes.
More Worked Examples
A room measured in metres
Given: 5.4 × 4.2 m
Result: A = 22.68 m² ≈ 244.1 ft² ≈ 27.13 yd²
A hallway in feet and inches
Given: 12 ft 4 in × 3 ft 6 in
Decimal: 12.333 ft × 3.5 ft
Result: A ≈ 43.17 ft² (≈ 4.01 m²)
An L-shaped floor in metres
Given: a 6 × 4 m main section and a 3 × 2.5 m section
Result: 24 + 7.5 = 31.5 m² ≈ 339.1 ft²
Floor Area for Several Rooms
For flooring that runs through more than one room, work out each room separately and add the areas. Keep the sections separate if you plan to use different products, and add them together only when the same flooring runs through all of them.
Fixed items on the floor
The calculator measures the whole rectangle. If you will not lay flooring under fixed cabinets or built-ins, work out their footprint and subtract it yourself.
From Floor Area to Cost
Cost = Floor area × Price per square foot. For example, 228 ft² at a price of 4.50 per ft² is 228 × 4.50 = 1,026.00. The 4.50 is only an example, so use the price of the product you are buying.
Floor Area Is Not the Same as Material Quantity
A floor area of 228 ft² does not mean you buy exactly 228 ft² of flooring. The amount you order depends on the product, the box coverage, the room shape, the layout or pattern and the number of cuts, so check the coverage on the packaging and decide on an allowance for waste.
Measuring a Floor Accurately
Feet and inches
When you measure with a tape in feet and inches, divide the inches by 12 and add them to the feet. 15 ft 6 in becomes 15.5 ft, and 12 ft 3 in becomes 12.25 ft. The feet-and-inches tab does this conversion for you.
Walls that are not square
Measure the length and the width in more than one place. If the readings differ, split the floor into rectangles and use the L-shaped tab, rather than averaging them and hiding the difference.
Checking the result
Round each side to the nearest foot and multiply. For 15.5 × 12.25 you would get about 16 × 12 = 192 ft², which is close to the exact 189.875 ft², so a typing slip is easy to spot.
Converting the answer
1 ft² = 0.092903 m² and 1 yd² = 9 ft². The calculator shows all three units, so you can compare the result with a product that is priced per square foot, per square metre or per square yard.
Gross, Internal and Net Floor Area
Worked example: one floor, three measures
A building is 10 m by 8 m on the outside, with walls 0.3 m thick.
Gross floor area = 10 × 8 = 80 m² Internal size = (10 − 0.6) × (8 − 0.6) = 9.4 × 7.4 Gross internal area = 69.56 m² Walls = 80 − 69.56 = 10.44 m² If a 4 m² stairwell is excluded: 69.56 − 4 = 65.56 m²
The wall thickness comes off both ends of each dimension, so the 0.3 m walls take 0.6 m from the length and from the width. The 65.56 m² is the net internal area in this example.
Frequently Asked Questions
How do I calculate the square footage of a floor?
Multiply the length by the width in feet.
How do I calculate square feet with inches?
Divide the inches by 12, add them to the feet, then multiply.
How do I convert square feet to square meters?
Divide by 10.7639, or switch the result unit.
How do I measure an L-shaped room?
Split it into two rectangles and add their areas.
Is floor area the same as living area?
Not always. Official living area follows specific measurement rules. This calculator gives the area you measure.
How many square yards is a floor?
Divide the area in square feet by 9. A 228 ft² floor is 25.3 yd².
How do I find the area of a floor with a closet or alcove?
Measure the closet or alcove as its own rectangle and add it, using the L-shaped mode, if the flooring will go into it.
Can I enter metres instead of feet?
Yes. The length and width inputs accept metres, and the result is shown in square feet, square metres and square yards.
Frequently asked questions
How do I calculate the floor area of a room?
Multiply the length by the width. A room 15 ft 6 in by 12 ft 3 in is 15.5 × 12.25 = 189.875 ft², which is about 17.64 m².
How do I convert inches to feet?
Divide the inches by 12 and add them to the feet. 6 in is 0.5 ft and 3 in is 0.25 ft, so 15 ft 6 in becomes 15.5 ft.
How do I find the area of an L-shaped floor?
Split it into two rectangles that do not overlap and add their areas. A 15 × 12 ft main section plus an 8 × 6 ft alcove is 180 + 48 = 228 ft².
How many square yards is a floor?
Divide the area in square feet by 9. A floor of 228 ft² is 25.33 yd².
Is floor area the same as the flooring I need to buy?
No. The amount you order depends on the product, the coverage of each box, the layout and the number of cuts, so decide on an allowance for waste before you buy.




