FSH LH Ratio Calculator: LH to FSH and FSH to LH Ratio

Divide two hormone results to get the LH to FSH ratio and the FSH to LH ratio. Enter FSH and LH in the same unit and the calculator shows both ratios.

Health, Money & Creator Extras Calculators

FSH LH Ratio Calculator

LH to FSH ratio and FSH to LH ratio from two hormone results in the same unit.

A ratio is not a diagnosis. Ask your doctor to interpret results.

Starting values: FSH 6 and LH 12. That gives an LH to FSH ratio of 2, which is 2 : 1, and an FSH to LH ratio of 0.5. The calculator does the division only. A ratio does not diagnose anything, so ask your doctor to interpret your results.

How the ratio is calculated

LH : FSH ratio = LH ÷ FSH

FSH : LH ratio = FSH ÷ LH

Where LH is luteinising hormone and FSH is follicle-stimulating hormone. Both are pituitary hormones, and laboratories commonly report them in IU/L. Use the same unit for both numbers. Because the units cancel in the division, the ratio itself has no unit, so it does not matter which unit you use as long as both match.

The two ratios are the same relationship written both ways. If one is 2, the other is 1 ÷ 2 = 0.5.

Worked examples

The starting example

FSH 6 and LH 12: LH ÷ FSH = 12 ÷ 6 = 2, shown as 2 : 1, and FSH ÷ LH = 6 ÷ 12 = 0.5.

FSH higher than LH

FSH 8 and LH 4: LH ÷ FSH = 4 ÷ 8 = 0.5 and FSH ÷ LH = 8 ÷ 4 = 2. The same two numbers swapped give the reverse ratios.

A ratio of 2.5

FSH 5.2 and LH 13: LH ÷ FSH = 13 ÷ 5.2 = 2.5. This is the figure that the Gloucestershire hospitals pathology page mentions in connection with early-cycle samples.

A result with decimals

FSH 4 and LH 10.6: LH ÷ FSH = 10.6 ÷ 4 = 2.65, and FSH ÷ LH = 0.377.

Equal values

FSH 7 and LH 7 give a ratio of exactly 1 in both directions.

What the ratio does and does not tell you

A pathology service describes the LH to FSH ratio as often raised, above 2.5, in samples taken on days 1 to 5 of the cycle in women with polycystic ovary syndrome, and also says it can be normal. It is one part of the assessment and not a test on its own. The same page explains that reference ranges for adult women differ by phase of the cycle, which is why the cycle day is asked for on the request.

This means that two people with the same ratio can have very different situations, and that one ratio taken at a different point in the cycle may mean something else. The calculator has no information on cycle day, age, other hormones or symptoms.

Using the calculator properly

  1. Take both values from the same blood sample and the same laboratory report.
  2. Check that both are in the same unit, such as IU/L.
  3. Enter FSH and LH, and read the ratio you want.
  4. Take the result and the report to your doctor and ask what it means for you.

Why the laboratory ranges matter

Each laboratory prints its own reference ranges next to the results. Use those, and not a general figure from the internet, when you compare a result. The ranges depend on the method, the sex and age of the person and, for women, the phase of the cycle.

Keeping a record of results

If you have several tests over time, a simple table helps. Write down the date, the cycle day if you know it, the FSH, the LH and the two ratios. For example, a first sample with FSH 7 and LH 9 gives LH ÷ FSH = 9 ÷ 7 = 1.29, and a later sample with FSH 6 and LH 15 gives 15 ÷ 6 = 2.5. Seeing the numbers side by side makes it easier to talk through them with your doctor, who can say whether the change matters.

Common mistakes

  • Dividing in the wrong direction, so that LH to FSH is mistaken for FSH to LH. Check the label on the answer.
  • Mixing units from two different reports. IU/L and mIU/mL are numerically the same, but other units are not.
  • Comparing a ratio from one part of the cycle with a ratio from another and treating them as the same thing.
  • Treating the ratio as a score that is good or bad on its own.

Different laboratories

Methods differ between laboratories, so the same blood sample can give slightly different numbers, and the printed reference ranges differ too. When you compare results over time, try to use the same laboratory.

Questions to take to your appointment

  • What cycle day was the sample taken on, and does that change how the numbers are read?
  • Which reference ranges apply to my age and the laboratory used?
  • Do these results need to be repeated, and when?
  • Which other tests or findings go with these results?

Having the two ratios worked out beforehand can save a little time in the appointment, but the clinical meaning is for your doctor to explain, because it depends on the whole picture and not on a single division.

Frequently asked questions

How do I calculate the LH to FSH ratio?

Divide the LH result by the FSH result, both in the same unit. For LH 12 and FSH 6 the ratio is 2, or 2 : 1.

What is the FSH to LH ratio?

It is the reverse, FSH divided by LH. For FSH 6 and LH 12 it is 0.5.

Does a high LH to FSH ratio mean I have PCOS?

No. A pathology page says the ratio is often above 2.5 early in the cycle in women with PCOS but can also be normal, so it is only one part of an assessment that your doctor makes.

Does the unit matter?

Only that both values use the same unit. IU/L is common. The ratio has no unit because the units cancel.

Mark Danny

Mark Danny

Mark Danny builds and maintains the free calculators and guides on Area of Irregular Shapes Calculator. Every calculator page explains its formula and shows a worked example, so you can check the working yourself. Spotted a mistake or have a suggestion? Email gulsher.hingoro101@gmail.com.

Articles: 559