Peptide Reconstitution & Dosage Calculator: Volume & Units

Enter the vial strength, the amount of diluent added and the dose your prescriber has specified, and the calculator returns the concentration, the volume to draw and the reading on a U-100 insulin syringe. A second mode divides a prescribed dose by the strength of a tablet or capsule. The tool only does the arithmetic for a dose that has already been specified.

Pregnancy, Prescriptions & Dosing Calculators

Peptide & Medication Dosage Calculator

Injection volume for a reconstituted peptide or liquid medication given its concentration and your prescribed dose, or the number of tablets for a given tablet strength.

mg
mL
mcg
This tool only performs the volume/tablet-count arithmetic for a dose your prescriber has already specified — it does not recommend, suggest, or validate any dose or protocol for any substance. Always follow your prescriber's or product's exact instructions, and be aware that many peptides referenced by these searches (e.g. BPC-157, TB-500, CJC-1295, ipamorelin, tesamorelin, melanotan) are not FDA-approved for human use and carry real safety uncertainty outside clinical supervision. A fractional tablet result may not be safe or accurate to split — check with a pharmacist before splitting tablets.

Liquid mode: vial and diluent

Concentration (mg per mL) = vial strength (mg) ÷ diluent (mL)
Volume to draw (mL) = (dose in mcg ÷ 1,000) ÷ concentration
Units on a U-100 syringe = volume (mL) × 100

Where:

  • Vial strength is the total amount of the substance in the vial, in milligrams.
  • Diluent is the volume of liquid added to the vial, in millilitres.
  • Dose is the amount your prescriber has specified, in micrograms. Dividing by 1,000 converts micrograms to milligrams.
  • On a U-100 insulin syringe, 1 mL is marked as 100 units, so units are the volume multiplied by 100.

Example 1: the starting values

A 5 mg vial with 2 mL of diluent and a prescribed dose of 250 mcg:

Concentration = 5 ÷ 2 = 2.5 mg per mL
Volume = (250 ÷ 1,000) ÷ 2.5 = 0.25 ÷ 2.5 = 0.1 mL
Units = 0.1 × 100 = 10 units

Example 2: a stronger vial

A 10 mg vial with 2 mL of diluent and a prescribed dose of 500 mcg:

Concentration = 10 ÷ 2 = 5 mg per mL
Volume = 0.5 ÷ 5 = 0.1 mL
Units = 10 units

The dose is twice as large, but the vial is twice as concentrated, so the volume is the same.

How the diluent volume changes what you measure

The dose is fixed by the prescription. The amount of diluent only changes the concentration, and therefore the volume you have to measure.

Diluent added to a 5 mg vial Concentration Volume for 250 mcg U-100 units
1 mL 5 mg per mL 0.05 mL 5
2 mL 2.5 mg per mL 0.10 mL 10
3 mL 1.667 mg per mL 0.15 mL 15

A larger volume is easier to read against the marks on a syringe, while a smaller volume is harder to measure accurately. The tool does not tell you which concentration is right, so use the instructions that came with your medication or ask your pharmacist.

Tablet mode

Tablets = prescribed dose ÷ strength of one tablet

Example 3: whole tablets

A prescribed dose of 50 mg with 25 mg tablets gives 50 ÷ 25 = 2 tablets.

Example 4: a fractional result

A prescribed dose of 37.5 mg with 25 mg tablets gives 37.5 ÷ 25 = 1.5 tablets. Not every tablet can be split safely or accurately, so check with a pharmacist before splitting one.

Checking your numbers

Unit conversions

The most common slip is mixing milligrams and micrograms. 1 mg is 1,000 mcg, so a 5 mg vial holds 5,000 mcg. If your dose is written in milligrams, multiply by 1,000 before you enter it.

A rough cross-check

Divide the total amount in the vial by the dose to see how many doses the vial holds. In example 1, 5,000 mcg ÷ 250 mcg = 20 doses. If the number looks wrong for your prescription, recheck the inputs before you draw anything.

Syringe type

The units result assumes a U-100 insulin syringe, where 1 mL equals 100 units. Other syringe types have different markings, so do not use the units figure with a syringe that is not U-100.

Limits of this tool

This calculator does not recommend, suggest or check any dose, protocol or substance. It cannot tell you whether a medication is safe or approved for you. Many peptide products that people search for are not approved for human use, and using them outside medical supervision carries real uncertainty. Follow your prescriber or the product instructions exactly, and ask a pharmacist if any figure is unclear.

Frequently asked questions

How do I calculate the volume to draw from a reconstituted vial?

Divide the vial strength in milligrams by the diluent volume in millilitres to get the concentration, then divide your prescribed dose in milligrams by that concentration. A 250 mcg dose from a 5 mg vial with 2 mL of diluent is 0.1 mL.

How do I convert micrograms to milligrams?

Divide by 1,000. 250 mcg is 0.25 mg, and 1 mg is 1,000 mcg.

How many units is 0.1 mL on an insulin syringe?

On a U-100 insulin syringe, 1 mL is 100 units, so 0.1 mL is 10 units. The conversion does not apply to other syringe types.

Why does adding more diluent change the volume I draw?

More diluent lowers the concentration, so the same dose takes up a larger volume. The dose itself does not change.

Does this calculator tell me what dose to take?

No. It only converts a dose that your prescriber has already specified into a volume or a tablet count. It does not recommend or validate any dose.

Can I split a tablet if the result is a fraction?

Not every tablet can be split safely or accurately. Check with a pharmacist before you do.

Mark Danny

Mark Danny

Mark Danny builds and maintains the free calculators and guides on Area of Irregular Shapes Calculator. Every calculator page explains its formula and shows a worked example, so you can check the working yourself. Spotted a mistake or have a suggestion? Email gulsher.hingoro101@gmail.com.

Articles: 559