Oil to Gas Mix Ratio & Cost Calculator (2-Stroke)

Work out how much 2-stroke oil to add to a given amount of gasoline for a chosen mix ratio, and what the finished mix costs. Enter the fuel volume, the ratio and your prices to get the oil needed and the total.

Commodity & Niche Pricing Calculators

Oil To Gas Price Calculator

Cost to mix 2-stroke fuel (gasoline + 2-stroke oil) at a given ratio, and total cost for a batch.

$
Enter your own current market rate — commodity prices change constantly.
$
Enter your own current market rate — commodity prices change constantly.

Starting values: 1 gallon of gasoline at 50:1 with gas at $3.50 a gallon and oil at $1.20 per fluid ounce, which needs 2.56 fl oz of oil and costs about $6.57. Use the prices you actually pay.

How the mix and its cost are calculated

A ratio such as 50:1 means 50 parts gasoline to 1 part oil. The calculator works in US gallons and fluid ounces:

Oil needed (fl oz) = gasoline in gallons × 128 ÷ mix ratio

Total cost = gasoline in gallons × gas price + oil needed × oil price per fl oz

Where 128 is the number of fluid ounces in a US gallon, the mix ratio is the first number of the ratio (50, 40, 32 or 25), and the oil price is per fluid ounce. If you enter the gasoline in litres or another unit, the tool converts it to gallons first.

Worked examples

One gallon at 50:1

128 ÷ 50 = 2.56 fl oz of oil. Gasoline costs $3.50 and oil costs 2.56 × 1.20 = $3.07, so the total is $6.57 for the gallon of mix.

Other ratios for one gallon

  • 40:1: 128 ÷ 40 = 3.20 fl oz of oil, total 3.50 + 3.84 = $7.34.
  • 32:1: 128 ÷ 32 = 4.00 fl oz, total 3.50 + 4.80 = $8.30.
  • 25:1: 128 ÷ 25 = 5.12 fl oz, total 3.50 + 6.14 = $9.64.

The richer the ratio, the more oil per gallon and the higher the cost of the mix.

A bigger batch

2.5 gallons at 40:1 needs 2.5 × 128 ÷ 40 = 8.0 fl oz of oil. Gasoline is 2.5 × 3.50 = $8.75, oil is 8 × 1.20 = $9.60, and the total is $18.35. For 5 gallons at 50:1 the oil is 5 × 128 ÷ 50 = 12.8 fl oz and the total is 17.50 + 15.36 = $32.86.

Metric quantities

5 litres of gasoline at 50:1 needs 100 mL of oil, or 20 mL per litre. The same sum gives 25 mL per litre at 40:1, 31.25 mL at 32:1 and 40 mL at 25:1.

Choosing the ratio

Use the ratio specified in the manual for your engine, or on the label of the oil you are using, because the right ratio depends on the engine design and the oil. A leaner mix than recommended can leave the engine short of lubrication, and a richer one tends to cause more smoke and deposits. The calculator does the arithmetic, but it cannot tell you which ratio is correct for your equipment.

How to mix the fuel

  1. Use a clean fuel container made for gasoline.
  2. Pour in about half of the gasoline.
  3. Add the measured amount of oil.
  4. Add the rest of the gasoline and mix well by shaking the closed container.
  5. Label the container with the date and the ratio.

Measure the oil with a graduated mixing bottle or syringe rather than estimating by eye, since small errors matter more at small batch sizes.

Making the cost useful

The cost figure helps you compare oil brands and ratios. A cheaper oil that needs a richer ratio can cost more per gallon than a pricier oil that runs at 50:1, so compare the finished cost of the mix rather than the price of the bottle. The tool does not include fuel storage, container costs or tax beyond the prices you enter.

Mixing small batches

The oil quantity scales directly with the fuel. At 50:1, 1 gallon needs 2.56 fl oz, so a 2.5 gallon batch needs 2.5 × 2.56 = 6.4 fl oz. At 40:1, 1 gallon needs 3.2 fl oz, so a half gallon needs 1.6 fl oz. For litres, divide 1,000 by the ratio: at 50:1 that is 20 mL of oil per litre of fuel, at 40:1 it is 25 mL, and at 32:1 it is 31.25 mL.

Cost per gallon of mix

At 50:1 with fuel at $3.50 a gallon and oil at $1.20 per fl oz, one gallon of mix costs 3.50 + 2.56 × 1.20 = $6.57, as the calculator shows. Oil is therefore about 3.07 ÷ 6.57 = 47 percent of the cost of the mix. A richer ratio such as 32:1 needs 4 fl oz per gallon and costs 3.50 + 4 × 1.20 = $8.30 per gallon, which is $1.73 more.

Choosing the ratio

The right ratio is set by the equipment maker and the oil maker, and it is printed in the manual or on the oil bottle. Use the calculator to measure the oil accurately rather than to choose the ratio. Mixing fuel more richly or leanly than specified is not a saving worth the risk to the engine.

Storing the mix

Mix only what you will use in a reasonable time, label the can with the ratio and the date, and shake it before pouring. The calculator does not know how long a mix keeps, so check the fuel and oil guidance for storage times.

Frequently asked questions

How much oil do I add to a gallon of gas at 50:1?

Divide 128 fluid ounces by 50, which gives 2.56 fl oz of oil per US gallon. At 40:1 it is 3.2 fl oz, at 32:1 it is 4 fl oz and at 25:1 it is 5.12 fl oz.

How do I calculate the 2-stroke mix for litres of fuel?

At 50:1 add 20 mL of oil per litre of gasoline, so 5 litres needs 100 mL. At 40:1 add 25 mL per litre, at 32:1 about 31 mL and at 25:1 40 mL.

Which mix ratio should I use?

Use the ratio in the engine manual or on the oil label. The calculator works out the quantities for the ratio you choose, but it does not decide which ratio suits your engine.

Does a richer mix cost more?

Yes, because it uses more oil per gallon. With the example prices, a gallon costs $6.57 at 50:1 and $9.64 at 25:1.

Mark Danny

Mark Danny

Mark Danny builds and maintains the free calculators and guides on Area of Irregular Shapes Calculator. Every calculator page explains its formula and shows a worked example, so you can check the working yourself. Spotted a mistake or have a suggestion? Email gulsher.hingoro101@gmail.com.

Articles: 559